VOLLRATH CT2H-120250 Spare Parts List Instruction Manual
- August 11, 2024
- VOLLRATH
Table of Contents
VOLLRATH CT2H-120250 Spare Parts List
Product Information
Specifications
- Model: 5&219(
- Color: N/A
- Power: 2
Product Usage Instructions
Power On/Off:
To power on the device, press the power button located on the front panel.
To power off, press and hold the power button until the device shuts down.
Setting Adjustment
Use the control dial to adjust settings such as volume, brightness, or any
other available options. Rotate the dial clockwise or counterclockwise to
increase or decrease the settings.
Charging the Device:
Connect the provided charger to the device’s charging port. Make sure the
device is powered off during charging. Allow sufficient time for a full harge
before first-time use.
Maintenance
Regularly clean the device using a soft, dry cloth to prevent dust
accumulation. Avoid using harsh chemicals or solvents that may damage the
device’s surface.
Frequently Asked Questions (FAQ)
-
Q: How do I reset the device?
A: To reset the device, locate the reset button (usually a small hole) and insert a paperclip or similar tool to press and hold the button for a few seconds. -
Q: Can I use third-party accessories with this product?
A: It is recommended to use only manufacturer-approved accessories to ensure compatibility and avoid any damage to the device.
CONVEYOR TOASTER 2-250 HIGH 120V
Part List
ITEM NO.| PART NUMBER| DESCRIPTION| QTY.|
---|---|---|---|---
1| B201100| BEARING ASSEMBLY 5/16″| 2
2| B200902| CONTROL, SPEED, 250 OHM CT2| 1
3| B204008| HEATERTUBE, CT2 (H,B)| 4
4| B204272| WIRE CONVEYOR BELT 10.5″ X 25″| 1
5| B300115| TRAY, SLIDE OUT| 1
6| B300118| CRUMB TRAY CT2| 1
7| B300131| CT2H SWING SHUTTER| 1
8| B300133| CT2/CT2H CURVED FRONT| 1
9| B400261| SPRING, .038″ DIA, 1.500″ LENGTH| 2
10| B400300| LEGS, BLACK 1″ 1/4-20| 4
11| B400380| CT2 LOAD-UP, WIRE RACK| 1
12| B401034| TERMINAL BLOCK 2 POSIITON| 1
13| B401052| POWER CORD, 14/3, 60″, 5-15 PLUG| 1
14| B401060| CORD,FAN,HP-75.24-A| 1
15| B401100| RESET SWITCH| 1
16| B401103| SWITCH, ROTARY POWER| 1
17| B401109| CT2H CONTROL LABEL| 1
18| B401202| DRIVE MOTOR 120V REVERSED 346| 1
19| B401209| MOTOR, FAN| 1
20| B401220| GUARD, FAN| 1
21| B401300| SPROCKET, 25B17 X 8MM| 2
22| B401340| SHAFT, DRIVE 10.5″| 1
23| B401344| SHAFT, IDLER 10.625″ CT2| 1
24| B401352| BEARING, FRONT, SPRING-HOUSING| 2
25| B401384| DRIVE CHAIN, LADDER 19″| 1
26| B405004| CT2H RIGHT SIDE LABEL| 1
29| B205162| CRUMB TRAY SUBASSEMBLY| 1
30| B405018| SILVER PUSH-ON KNOB| 1
31| B405019| SILVER PUSH-ON KNOB W/ SET
SCREW
| 1
© 2017 Document No. CT2H-120250_OSI Rev. C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>