VOLLRATH BCO Series EaziClean Premium and CanMaster Can Openers User Manual

VOLLRATH BCO Series EaziClean Premium and CanMaster Can Openers

Specifications:

• Item No.: BCO-2000, BCO-3000, BCO-5000, BCO-6000, BCO-7000, BCO-1, BCO-4
• Model : Various models as listed
• Bar Length: 16 inches (40.6 cm) or 25 inches (63.5 cm)
• Gear Material: Medium-duty zammac alloy, heavy-duty stainless steel, Titan stainless steel, Premium aluminum alloy, CanMaster aluminum alloy

Product Usage Instructions

Before Installation:
Prior to first use, wash all the components with warm, soapy water. Rinse thoroughly.

Installation:
Install the Base:

1. Choose a convenient location with a firm work surface.
2. Mount the platform base using the included hardware. If using a thin-gauge work surface, place a spacer plate underneath to prevent flexing.

Operation:
Fixed Location:

1. Place the bar into the base.
2. Lift the handle to the UP position and place the can against the bar.
3. Punch the blade into the can lid with a swift downward movement.
4. Rotate the handle clockwise to open the can.

Variable Location:
If not permanently mounted, install the clamp attachment to the platform base and tighten it to secure to the countertop.

Cleaning:
EaziClean:

Notice: Food acids can cause blade dullness and corrosion. Clean after every use.

1. Hand wash only using hot water and a bristle brush.
2. Remove the blade cartridge and inspect for good condition.
3. If blade is nicked, discard and replace with a new one following the instructions provided.

Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this packaging to ship the equipment if repairs are needed.

Safety Precautions
To ensure safe operation, read the following statements and understand their meaning. This manual contains safety precautions which are explained below. Please read carefully. Warning is used to indicate the presence of a hazard that will or can cause severe personal injury or death. Caution is used to indicate the presence of a hazard that will or can cause minor or major personal injury if the caution is ignored.

NOTICE : Notice is used to note information that is important but not hazard-related.

To reduce risk of injury or damage to the equipment:

• Check the can opener before each use to insure it is clean.
• Check the blade to ensure that it is securely fastened and in good condition. Replace nicked or worm blades immediately.

MODELS

FUNCTION AND PURPOSE

The can openers are designed to easily pierce and safely open cans. They are not intended for household or laboratory use.

Item No.

|

Model

| Bar Length IN (CM)| Gear Size| Material Construction
---|---|---|---|---
BCO-2000|

EaziClean®

| 16 (40.6)| 1 (2.5)| Medium-duty, zammac alloy
BCO-3000| 25 (63.5)
BCO-5000| 16 (40.6)| 1¹⁄₂ (3.8)| Heavy-duty, stainless steel
BCO-6000| 25 (63.5)
BCO-7000| 25 (63.5)| 1¹⁄₂ (3.8)| Titan, stainless steel
BCO-1| Premium™| 16 (40.6)| 1 (2.5)| Medium-duty, aluminum alloy
BCO-4| CanMaster™| 16 (40.6)| 1¹⁄₂ (3.8)| Medium-duty, aluminum alloy

Please register your product at Vollrath.com/ProductRegister

BEFORE INSTALLATION

Prior to first use, wash all the components with warm, soapy water. Rinse thoroughly.

INSTALL THE BASE

Fixed Location
Tools You Will Need

• Flathead screwdriver

1. Choose a convenient location with a firm work surface.
2. Mount the platform base using the included hardware as shown below.

NOTICE: If you are using a thin-gauge work surface, Vollrath suggests placing a spacer plate underneath. This will prevent the work surface from flexing, which may cause the can contents to spill when opening.

Variable Location

1. If the can opener is not permanently mounted to a countertop, install the clamp attachment to the platform base.
2. Tighten the clamp to secure the platform base to the countertop.

OPERATION

1. Place the bar into the base.
2. Lift the handle to the UP position. Place the can against the bar. Using a swift downward movement, punch the blade into the can lid.
3. Lower the handle 90° to the DOWN position to engage the gear drive.
4. Rotate the handle in a clockwise direction to open the can.
5. Raise the handle to the UP position to disengage the gear drive.
6. Lift up on the handle to raise the bar sufficiently to release the blade from the can. Move the can away from the bar, taking care not to spill the contents.

CLEANING

NOTICE : Food acids can cause the blade to become dull and corrode the metal. Immediately clean the unit after every use.

NOTICE : Hand wash only.

1. Using HOT water and a bristle brush, thoroughly rinse off or spray off the can opener.
2. Remove the blade cartridge.
3. Inspect the blade to ensure that it is in good condition.
4. If the blade has a nick, discard and replace with a new blade. Refer to the instructions included with the replacement blade.

TROUBLESHOOTING

SERVICE AND REPAIR
Serviceable parts are available on Vollrath.com. To avoid serious injury or damage, never attempt to repair the unit or replace a damaged power cord yourself. Do not send units directly to The Vollrath Company LLC. Please contact Vollrath Technical Services for instructions. When contacting Vollrath Technical Services, please be ready with the item number, model number (if applicable), serial number, and proof of purchase showing the date the unit was purchased.

WARRANTY STATEMENT FOR THE VOLLRATH CO. L.L.C.

• This warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written warranty to purchasers for such uses.
• The Vollrath Company LLC warrants the products it manufactures or distributes against defects in materials and workmanship as specifically described in our full warranty statement. In all cases, the warranty runs from the date of the end user’s original purchase date found on the receipt.
• Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will not be covered under warranty.
• For complete warranty information, product registration and new product announcement, visit www.vollrath.com.

The Vollrath Company, L.L.C.

• 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
• Main Tel: 800.624.2051 or 920.457.4851
• Main Fax: 800.752.5620 or 920.459.6573
• Customer Service: 800.628.0830
• Canada Customer Service : 800.695.8560

Technical Services

• techservicereps@vollrathco.com
• Induction Products : 800.825.6036
• Countertop Warming Products : 800.354.1970
• All Other Products: 800.628.0832

© 2017 The Vollrath Company L.L.C. Part No. 2350084-1 ml 4/26/17

www.vollrath.com

FAQ

Q: Can this can opener be used for household or laboratory purposes?
A: No, the can openers are designed for commercial use and are not intended for household or laboratory applications.

Q: How should I clean the unit after use?
A: Hand wash the unit using hot water and a bristle brush. Remove the blade cartridge, inspect it, and replace if necessary.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>