DBK CRB158O Fender Tail Installation Guide
- August 10, 2024
- DBK
Table of Contents
DBK CRB158O Fender Tail
Product Information
Specifications
- Product Name: Installation kit – Fender Tail
- Item Number: CRB158O
- Origin: Made in Italy
Product Usage Instructions
Installation
DBK recommends having the installation done by a specialized mechanic for optimal results.
Tools Required
Refer to the workshop manual for the specified tightening torques and tools needed for installation.
Installation steps
- Ensure all necessary parts are included in the kit.
- Refer to the workshop manual for step-by-step installation instructions.
- Follow the specified tightening torques for each component.
- Double-check all connections and fittings before use.
Frequently Asked Questions
Q: Can I install the product myself without a specialized mechanic?
A: While it is recommended to have a specialized mechanic perform the installation, experienced users with proper tools and knowledge may attempt the installation following the workshop manual guidelines carefully.
Q: What should I do if any parts are missing from the kit?
A: Contact customer support to request the missing parts before proceeding with the installation.
OVERVIEW
- N. – COD. Qt.
- 1 – CRB158O 1
Tools
See the workshop manual for tightening torques.
INSTALLATION INSTRUCTION
Terms of use
Terms of use, necessary precautions, and disclaimer:
All DBK products made and/or sold, dealing with the purchase Agreement, are
designed and meant to be used only in private roads closed to public traffic
or for racing use in closed tracks, they are not therefore provided with
homologation.
Customers buying the above-mentioned products, who intend to use them on a
public street, must require in advance the homologation (or an updated
registration) to their country’s competent authority, otherwise, they
acknowledge to be in breach of the law of the country in which they are using
the above-mentioned products and, consequently, they take charge of the
liability arising from the inappropriate use, thereon, the vendor takes no
responsibility in case of fine, penalty or damage which may occur to the
customer and user.
Installation and mounting
Read and follow these instructions carefully, an essential part of the product. We recommend that the installation and mounting of the parts be done by qualified mechanics or specialized mechanical stores. The company takes no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation. For correct installation, all tightenings must be carried out after the correct positioning of the accessories and without forcing the moving points once blocked, so as not to compromise the seal and correct functioning of the product.
Cleaning and service
All DBK products require regular inspection and maintenance. The greater their
use, the greater the frequency of checks must be. If you find any parts
missing, damaged, worn, or with an irregular appearance, immediately consult
your DBK dealer before using the motorcycle. In any case, never try to repair
or modify DBK products or their parts, replace them with original DBK
components. DBK products may not be compatible with your motorcycle.
Do not use chemical products such as alkaline degreasers or acids, for they
can be harmful to the anodized surface, use only mild soaps and avoid the
utilization of pressure washers.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>