FORTIN EVO-ONE Remote Starter and Security Installation Guide
- August 10, 2024
- FORTIN
Table of Contents
FORTIN EVO-ONE Remote Starter and Security Installation Guide
Immobilizer bypass
Lock
Unlock
Arm
Disarm
Horn
Parking Light
Tachometer
Trunk Open
Rear Defrost Comfort Group AUX.1 Groupe Comfort Heated wiper
Door Status
Trunk Status
Hand-Brake Status
Foot-Brake Status
Hood Status*
Secure Takeover
OEM Remote monitoring
COMPATIBLE MODULE REQUIRED:
QR CODE ON THE LABEL MANUFACTURED AFTER: 2019
FIRMWARE VERSION| To add the firmware version and the options, use the FLASH
LINK UPDATER
---|---
88.[33] MINIMUM| or FLASH LINK MOBILE tool, sold separately.
rogram bypass option:
**IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
Vehicle hybrid only**
| UNIT OPTION | DESCRIPTION |
|---|---|
| C1 | OEM Remote status (Lock/Unlock) monitoring |
| A11 OFF NON | Hood trigger (Output Status). |
| D6 | Push-to-Start |
| D4 | Hybrid mode (Vehicle hybrid only) |
**Program remote starter option for COMFORT GROUP ACTIVATION:
**
| FUNCTION | MODE | DESCRIPTION |
|---|---|---|
| 39 | 2 | Temperature option : AUX.1 activated at 5oC, 5 seconds after remote |
started
NOTES
The vehicles OEM remote and Smarteh are still operable during remote start.
MANDATORY INSTALL
HOOD NON PIN
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
SECURITY STICKER
WARNING ATTENTION
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
Parts required (not included)
FLASH LINK UPDATER,
SOFTWARE
**
FLASH LINK MANAGER
Microsoft Windows Computer with Internet connection Ordinator Microsoft
Windows avec connection Internet
**
FLASH LINK MOBILE
FLASH LINK MOBILE APP
Smartphone Android or iOS with Internet connection (Internet provider charges
may apply)
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
Press and hold the programming button:
Connect the 6-PIN Main harness (White connector).
The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.
Release the programming button when the LED is BLUE.
If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.
Insert the required remaining connectors.
Press the Push-to-Start button twice, to turn the ignition ON
The BLUE LED will flash rapidly
Press the Push-to-Start button once to turn the ignition OFF.
The BLUE LED continues to flash rapidly
Press the Unlock button on the vehicle OEM remote.
The BLUE LED will turn ON solid.
KEY BYPASS PROGRAMMING PROCEDURE 2/3
Press the foot-brake pedal.
Press the Push-to-Start button until the engine start.
Release the foot-brake pedal.
The BLUE LED will turn OFF.
The RED LED will turn ON .
Press the Push-to-Start button once to turn off the engine.
Press the foot-brake pedal
Press the Push-to-Start button until the engine start.
The RED LED will turn OFF.
The YELLOW LED will turn ON
Wait
The RED and YELLOW LEDs will alternate.
Release the foot-brake pedal
Press the Push-to-Start button once to turn off the engine
KEY BYPASS PROGRAMMING PROCEDURE 3/3
Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.
Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
Parts required (not included)
AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 6-Pin (MainHarness) or the 4-pins
(Data-Link) connector and after all the remaining connector.
The module is now programmed.
REMOTE STARTER / ALARM VERIFICATION PROCEDURE
REMOTE STARTER PROGRAMMING PROCEDURE
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.
REMOTE STARTER FUNCTIONALITY
All doors must be closed.
Remote start the vehicle.
START
- Unlock the doors with either:
- The OEM remote
- The remote-starter remote
- Or the proximity remote
Enter the vehicle with the SMART-KEY.
DO NOT PRESS THE BRAKE PEDAL.
Press and release the Push-to-Start button once.
Press the brake pedal.
The vehicle can now be put in to gear and driven.
If the Smart-Key is not detected the vehicle will shut down.
Module label
Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualified technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tell: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
WEB UPDATE www.fortinbypass.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>