FORTIN 2023-2024 Toyota Corolla Push to Start Installation Guide
- August 10, 2024
- FORTIN
Table of Contents
FORTIN 2023-2024 Toyota Corolla Push to Start
INSTALLATION GUIDE
REGULAR INSTALLATION
DESCRIPTION
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
KEY BYPASS PROGRAMMING PROCEDURE 2/3
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Specifications
- Model: EVO-ALL
- Compatibility: Toyota Corolla Hatchback 2023-2024, Sedan 2023
- Manufactured after: 2019
- Firmware Version: 88.[33] (Minimum)
- Required Parts: 3X 1 Amp Diodeode
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
FAQ
Q: Can the OEM remote and SmartKey still be used during remote start?
A: Yes, the vehicle’s OEM remote and SmartKey remain operable during remote start.
Q: What should be done if the vehicle can be remote started with the
hood open?
A: Set function A11 to OFF if the vehicle can be remote started with the hood open.
Q: What parts are required but not included?
A: 3X 1 Amp Diodeode is a mandatory part for installation but is not included with the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>