FORTIN KIA Niro Hybrid Push to Start Installation Guide

Table of Contents

Wiring Connection
- Follow the wiring connections as per the provided guide for proper installation.
Programming Instructions
- Press and hold the programming button while inserting the 4-Pin Data-Link Connector. The LED will alternate between YELLOW and RED.
- Release the programming button when the LED turns solid RED. If not, disconnect and retry from step 1.
- Press and release the programming button 6 times. The RED LED will flash 5 times and pause.
- Do not press the brake pedal. Press the START/STOP button twice to turn ON the ignition. The RED LED will flash rapidly 10 times, indicating successful key bypass programming.

Q: How do I know if the key bypass programming was successful?
- A: The RED LED will flash rapidly 10 times after following the programming steps, indicating a successful key bypass programming.
Q: What should I do if the LED does not turn solid RED during programming?
- A: Disconnect the 4-Pin Data-Link Connector, go back to step 1, and retry the programming process.

ADDENDUM – SUGGESTED WIRING CONFIGURATION

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

The module is now programmed

Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

Notice:

Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis.
We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING

The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it.
Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied.
The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects.
This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2015, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
- Tel: 514-255-HELP (4357) 1-877-336-7797
- WEB UPDATE | MISE À JOUR INTERNET
- www.fortinbypass.com.
- REV.: 20240704
- GUIDE # 66791