VOLLRATH R39736N Cafeteria Breath Guard Installation Guide

August 7, 2024
VOLLRATH

VOLLRATH R39736N Cafeteria Breath Guard

Specifications

  • Product Name : Vollrath Cafeteria Breath Guard
  • Model : One Piece and Three Piece options available
  • Item No. : 2350030-01 Rev 04/12

Product Usage Instructions

One Piece Breath Guard Installation:

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figure 1.
  2. Repeat the installation for all four uprights.

Three-Piece Breath Guard Installation

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figures 1 and 2.
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C). Repeat on the other side.
  3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
  4. Install the side shield (G) to the support tube (D) securing it with cap nuts (C). Repeat on the other side.
  5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
  6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

Installation Instructions

One Piece Cafeteria Breath Guard three Piece Cafeteria Breath Guard
These instructions cover the installation of the one-piece Cafeteria Breath Guard and the three-piece Cafeteria Breath Guard.
One Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE : Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
    Figure 1. One Piece Breath Guard Installation

  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.

  3. Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.

  4. Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.

Three-Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE :
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
    Figure 2. Three-Piece Breath Guard Installation

  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.

  3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.

  4. Install the side shield (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.

  5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.

  6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A. Main Tel: 800.628.0830 Service Tel : 800.628.0832 FAX : 800.752.5620 Vollrath of Canada, Co. Tel : 800.695.8560 FAX : 800.752.5620 © 2010 The Vollrath Company, L.L.C.

FAQ

  • What should I do if I accidentally crack the plastic while tightening the cap nuts?
    If you accidentally crack the plastic, please contact Vollrath Customer Service for assistance at the provided contacts.

  • Can I disassemble the breath guard for cleaning?
    Yes, you can disassemble the breath guard following the reverse of the installation steps. Make sure to clean all components thoroughly before reassembling.

  • Can I adjust the height of the breath guard?
    The height adjustment may vary depending on the specific model. Refer to the user manual or contact Vollrath Customer Service for guidance on adjusting the height of your breath guard.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

VOLLRATH User Manuals

Related Manuals