somfy SONESSE2 28 Zigbee Hp 24v DC Motor Instruction Manual
- August 3, 2024
- somfy
Table of Contents
Somfy SONESSE2 28 Zigbee Hp 24v DC Motor
WAKE UP THE DRIVE
For initial unpackaging of drive, wake up the drive by briefly pressing the motor head programming button or plugging in the charger.
START UP
To set the drive, download “Ta Homa pro” application available on stores
DRIVE SETTING
Once the “Ta Homa pro” application is downloaded, open the app and follow the instructions to set the drive.
USE
This drive does not require any maintenance operation.
DRIVE RESETTING
This reset deletes all programmed control points, all end limit settings, resets the favourite (my) position for the drive and leaves the current Zigbee network.
INSTRUCTIONS TO BE RESPECTED
These instructions apply to all SONESSE2 28 Zig bee HP LI US drive, the different versions of which are available in the current catalogue.
FIELD OF APPLICATION
The Sonesse 28 drives are designed to motorise all types of:
- Interior vertical blinds which front rail moves solely by gravity with a mass less than 15 kg.
- Tiltable venetian blinds which bottom lath can be lifted at least by 4 cm when an upward force oflS0 N is applied to the bottom lath positioned at 16 cm from the fully extended position.
LIABILITY
Please read these instructions carefully before installing and using the
drive. In addition to following the instructions given in this guide, the
instructions detailed in the attached Safety instructions document must also
be observed. The drive must be installed by a motorisation and home automation
professional, according to instructions from Somfy and the regulations
applicable in the country in which it is commissioned.
It is prohibited to use the drive outside the field of application described
above. Such use, and any failure to comply with the instructions given in this
guide and in the attached Safety instructions document, absolves Somfy of any
liability and invalidates the warranty.
The installer must inform its customers of the operating and maintenance
conditions for the drive and must provide them with the instructions for use
and maintenance, and the attached Safety instructions document, after
installing the drive. Any After-Sales Service operation on the drive must be
performed by a motorisation and home automation professional.
If in doubt when installing the drive, or to obtain additional information,
contact a Somfy adviser or go to the website
www.somfy.com.
SAFETY INSTRUCTIONS FOR WIRING
Cables which pass through a metal wall must be protected and isolated using a
sheath or sleeve.
Attach cables to prevent any contact with moving parts.
If the drive is used outdoors, and if the power supply cable is a type H0S-WF
cable, the cable should be installed in a UV-resistant duct, e.g. under a
gland.
Leave the drive power supply cable accessible: the product must be easily
replaceable.
Always make a loop in the power supply cable to prevent water entering the
drive.
WARNING
To ensure electrical safety, this Class Ill drive must be powered by a «SEL V» voltage source (Safety Extra Low Voltage).
The drive must be installed by a professionally qualified person {electrical
specialist according to DIN VOE 1000-10) for drives and automations in the
building services sector in accordance with the Somfy instructions and the
applicable regulations in the country of commissioning.
Using this drive with any products which are not listed In the attached
«Compatibility matrix» document shall also render Invalid any Somfy warranty
and release Somfy from any liability.
For the purposes of recharging the battery, only use the detachable supply
unit provided with this appliance.
Improper using battery pack may cause overheat, fire, explosion, resulting in
serious injury or death.
Do not expose the drive or battery to excessive temperatures.
There is a risk if terminals of the battery-operated drive or battery being
short circuited by metal objects.
Ensure battery is fully charged prior to installation on site.
To increase the life of the battery, it is recommended to fully charge it
every other year.
SPECIFIC INSTRUCTIONS FOR ASSEMBLY
SONESSE2 28 Zigbee HP LI US : interior diameter of the tube has to be 0 26.6 mm or great er.
Frequency bands and Maximum power used
2.4 GHz – 2.4835 GHz e.r.p <63mW{USA, Australia, Canada}
2.4 GHz – 2.4835 GHz e.r.p <10m W{Other countries}
Power supply
15V DC-1A class 2power supply SELV+LPS
Charging temperature
0°C to 40°C
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by SOMFY ACTIVITES SA is under license. Other trademarks and trade names are those of their respective owners.
Reference Designation
5176122 SONESSE2 28 Zigbee HP LI US
FCC warning statement:
- This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF RADIATION EXPOSURE STATEMENT: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body.
FCC ID : DWNSON283028241
ISED WARNING STATEMENTS: This equipment complies with IC RSS· 102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device. ISED ID: 12049A-SON28302241
Apple and Apple logos are trademarks of Apple, Inc., registered in the U.S.
and other countries.
iPad® and iPhone8 are registered trademarks of Apple, Inc. App Store is a
service mark of Apple Inc.
Android is a trademark of Google LLC.
https:/ /developer.android.com/distribute/ marketing-tools/brand-guidelines
Please separate storage cells and batteries from other types of waste and recycle them via the local collection facility.
We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an approved collection point for recycling.
Intertek 5028198 ..
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
From the Application “Help me by Somfy ” scan the QR code here to find complete setting instructions.
sonesse228zigbeeliion
Customer Support
SONESSE2 28 Zigbee HP LI US
Short installation guide
ORIGINAL INSTRUCTIONS
Complete instruction guide available online on www.somfy.info
SOM FY ACTIVITES SA 50 avenue du Nouveau Monde, 74300 CL USES FRANCE
www.somfy.com
Images are not contractually binding – 100% recycled paper – Copyright©
2023-2024. All rights reserved. SOMFY ACTIVATES SA, Socketed Anonyme, capital
35.000.000 Euros, RCS Annecy, 303.970. 230 – 04/2024