SUNBEAM 2623-33 Stand Mixer Instructions
- July 31, 2024
- Sunbeam
Table of Contents
SUNBEAM 2623-33
Owner’s ManualFind Your SUNBEAM Mixer Parts – Select From 8
Models
——– Manual continues below ——–
2623-33 Stand Mixer
This Owner’s Manual is provided and hosted by Appliance Factory
Parts.
Appliance Factory Parts
Experts in BBQ, Humidifier, & Appliance Parts
1-800-955-7075
Shop genuine replacement parts for SUNBEAM
2623-33
FEATURES OF YOUR STAND MIXER
A. ATTACHMENT EJECT BUTTON – The eject button, located on the top of the
handle, releases the beaters or dough hooks for easy cleaning.
B. OFF-CENTER HEAD AND BEATERS – The head of the MIXMASTER Stand Mixer and
beaters are positioned off-center to the bowl to make it easier to add
ingredients during mixing.
C. STAINLESS STEEL MIXING BOWLS – 2.0 and 4.0 quart mixing bowls are ideal for
mixing large or small quantities of ingredients.
D. TURNTABLE BOWL SELECTOR – Simply slide the bowl selector lever to the left
when using the small bowl and to the right when using the large bowl.
E. TURNTABLE – Designed to fit both the large and small bowl, the turntable
allows the bowl to turn while mixing.
F. T ILT BACK LOCKING HEAD BUTTON – The head of the MIXMASTER Stand Mixer
tilts back and locks securely into position to allow easy removal of mixing
bowls and attachments.
G. MIXER RELEASE TRIGGER – Remove the mixer head from the base for convenient
cleaning and storage.
H. POWER/SPEED INDICATOR LIGHT – The ON/OFF light is also used to indicate
speed setting.
I. 12 VARIABLE SPEEDS – The 12 variable speeds with softstart ensure superior
mixing control and maintains speed regardless of the mixing load.
J. SOFT GRIP HANDLE – The soft grip molded handle gives you comfort and a
firmer grip while mixing.
K. BURST OF POWER BUTTON – Press down on button to automatically increase the
beater speed for an immediate burst of power.
L. STAINLESS STEEL BEATERS – For creaming butter and sugar, plus mixing heavy
cake mixes.
M. STAINLESS STEEL DOUGH HOOKS – Dough hooks take the hard work out of
kneading dough and other heavy mixtures.
PREPARING THE STAND MIXER FOR USE
Before preparing the mixer for use, be sure the speed control dial is in the
OFF position and the electric cord is unplugged. Be sure to wash bowls and
attachments before initial use.
ATTACHING THE TURNTABLE
Place the revolving turntable into the base of the stand by pressing the
turntable into the center hole of the adjustable slot until it snaps into
place.
ADJUSTING THE TURNTABLE
The turntable must be adjusted depending upon which bowl size is being used.
To adjust, press down on the Turntable Bowl Selector Switch and slide the
switch to the proper icon. (See Figure 1)
ATTACHING AND REMOVING THE MIXING HEAD
To attach the mixing head, press in on the mixer-release trigger, located at
the rear of the stand. Place the mixer head on the stand so that the metal
pivot on the bottom of the mixer head goes into the latched opening on top of
the stand. As you release pressure from the mixer-release trigger, the top of
the latch should clamp around the metal pivot. Once the mixing head is lowered
into position, it will lock into place. (See Figure 2A)
RAISING AND LOWERING THE MIXING HEAD
Press the head lock button located on the neck of the stand mixer. While the
button is depressed, hold the handle and ease the head of the stand mixer
back. The MIXMASTER mixer head will lock into this position. To lower the
mixing head, press the head lock button. While the button is depressed, hold
the handle and ease the head of the stand mixer down. A “click” sound will
indicate when the mixer head has locked into position.
(See Figure 2B) Be sure the mixer head is securely in position before using.
NOTE: This mixer is NOT intended for use away from the stand.
ABOUT THE SPEED
The speed control dial is used for turning the mixer ON 12 mixing speeds. (See
Figure 3)
Rotate the speed control dial in a clockwise dir a counterclockwise direction
to decrease mixing speed.
As you rotate the speed contr indicator light on the side of which the mixer
is operating.
Rotate the speed control dial until the indicator is to use.
MIXING GUIDE
Please keep in mind that the various mixing tasks and related speeds listed in
the following table may vary slightly from recipe to For most recipes, it is
better to begin your mixing on a slower speed until the ingredients begin
combining, then move to the appropriate speed range for the particular task.
When mixing larger quantities you may need to incr mixing required and the
larger load on the machine.
When building up a recipe that requires the addition of dr the speed down
while these ingring the extra ingredients begin combining, slowly increase to
the appropriate speed for the particular mixing task.
Two Year Limited Warranty
Sunbeam Products, Inc. doing business as Jar
Corporation (Canada) Limited doing business as Jar that for a period of two
years from the date of purchase, this product will be fand workmanship. JCS,
at its option, will found to be defective during the warranty period.
Replacement will be made with a new or remanufactured product or component. If
the product is with a similar product of equal or greater value. This is your
exclusive warranty This warranty is valid for the original retail purchaser
from the date of initial is not transferable. Keep the original sales receipt.
Proof of pur performance. JCS dealers, service centers, or retail stor to
alter, modify or any way change the ter
This warranty does not cover nor use or misuse of the product, use on
disassembly, repair or alteration by anyone other than JCS or an authorized
Jarden service center warranty does not cover:
DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE
For product questions:
Jarden Consumer Service
Canada : 1.800.667.8623
USA : 1.800.458.8407
www.sunbeam.com
References
- speed.As
- Sunbeam Products: Solutions for Everyday Life
- Repair Your Grill: Shop Replacement Parts for 24,880 Models
- Sunbeam Mixer Parts - Select From 8 Models