ADLER AD 6304 Oven of Convection Desktop User Manual
- June 6, 2024
- ADLER
Table of Contents
ADLER AD 6304 Oven of Convection Desktop
Parts
SAFETY CONDITIONS
IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The appliacable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- Never put the power cable, the plug or the whole device into the water . Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to b e replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter.
- Do not immerse the motor unit in water.
- In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
- Always use both hands to carry or move the device. Always remove the cord from the plug prior to carrying or moving the device.
- Always turn on the device with the cover (motor part, 3) placed on the bowl (1).
- Do not remove the glass cover before switching off the device; then, place the glass cover on the rack (13).
- Never put the glass cover (3) directly on the table; always place it on the rack (13).
- Do not place any glass or plastic dishes inside the device.
- CAUTION: Be careful when removing the cooked dishes from the device as its cover, pan and grill grates remain hot after use. Use oven gloves and tongs.
- CAUTION: Do not pour cold water into the hot glass bowl – it will break.
- The device heats up during operation; provide sufficient space to ensure its ventilation.
- Do not place paper, cardboard, plastic and other objects made with combustible materials in the device – they can ignite.
- Place roasting dishes only on grates – it is necessary to ensure the free flow of hot air inside the bowl.
- Do not place the device directly underneath electrical outlet.
- Do not stare at the bowl; strong light can cause eye damage.
- Do not touch hot surfaces of the device. Use protective gloves when removing or touching any hot elements.
- Before and during use, make sure that the power cord is not stretched over an open flame or other heat source or sharp edges that may damage the insulation of the cable.
- Before the first use, remove all packaging components. Attention! In the case of a casing with metal parts, on these elements a slightly visible protective foil can be stretched, which should also be removed.
- The equipment is not intended for use with external time switches or a separate remote control system.
- NEVER cover the device during operation or when it does not cool down completely, remember that the heating elements of the device take time to cool down completely.
- BE CAREFULLY CAREFUL if you use the device on surfaces sensitive to high temperatures. It is recommended then to use insulating washers
- The device may not be used with external time switches or other separate remote control systems
- NOTE: Always unplug the oven from the electrical socket after use.
DESCRIPTION OF THE DEVICE
1. heat-resistant glass bowl
2. glass cover
3. motor
4. cover handle/safety switch
5. temperature control between 65-250°C
6. 60-min timer
7. vents
8. handles
9. bowl stand
10. ring
11. low grill grate
12. high grill grate
13. rack for glass cover
14. tongs for removing grill grates and dishes
BEFORE FIRST USE
1. Remove all accessories from the bowl. Make sure no paper or styrofoam
packing material is left in the bowl or cover.
2. Place the bowl (1) on the stand (9) and the cover (3) on the bowl (1).
Place the device on a flat, hard surface away from flammable.
3. Run the device for 5-10 minutes setting the temperature control to
maximum. Preservative treatment will burn off.
4. Switch off the device and allow it to cool. Wipe the bottom of the lid
with a slightly damp sponge then wipe dry.
USING THE DEVICE
-
Place the cover on the rack(13), making sure to leave the cover handle (4) in the “open” position.
-
Place one or both grill grates (as required) in the bowl and arrange food products to ensure free air circulation.
-
Place the cover (3) on the bowl (1). If the food sticks out from the bowl, use the extender ring (10).
-
Set the temperature (5) and timer (6) as needed.
-
Insert the power cord into the electric plug.
-
Set the handle (4) to the “closed” position. The device will operate for the time set with the timer knob (6).
CAUTION: Raising the handle (4) to the “open” position results in the device immediately switching itself off regardless of the elapsed time. -
Periodically check the condition of food, reducing or increasing the temperature as needed.
-
The timer bell will ring at the end of the cycle. Air circulation and heaters are turned off.
-
Remove the cover and place it on the rack (13). Be careful of the hot steam released from the bowl. Use tongs to remove food and grill grates.
CAUTION: Place the hot cover only on the designated rack. Do not put it on the table or another surface because of fire hazard. CLEANING AND
MAINTENANCE
-
Unplug the device.
-
Remove the cover. Wipe the glass bowl (and plastic parts if needed) with a damp sponge with dishwashing liquid. Next, wipe dry. Be careful not to get water into the motor.
CAUTION: Do not rinse under running water. -
Wash the bowl and grill grates with water and dishwashing liquid. Allow to drain. The glass bowl is dishwasher safe. Do not put the cover in water or dishwasher.
-
Do not wash grill grates in a dishwasher. Strong detergents may cause blackening.
TECHNICAL DATA:
Capacity: 12l
Power supply: 220-240V ~50/60Hz Power Nom 1200 Power Max:1400W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.