GPD WIN 4 Handheld Gaming PC User Manual
- October 29, 2023
- GPD
Table of Contents
GPD WIN 4 Handheld Gaming PC User Manual
Overview
Interface Description
- USB-A interface
- Connect to a docking station, USB flash drive or any other external device for data transmission.
- Connect to a smartphone for charging.
- Connect to any external portable Wi-Fi or USB network adapter for surfing the Internet.
- The interface is available for charging but not available for reverse charging.
- Type-C (USB4) interface
- Connect to a display, docking station or any other external device for audio/video output or data transmission.
- Connect to a laptop, smartphone or tablet for charging.
- Connect to eGFX device for promoting gaming experience based on external graphics card.
- This port supports PD protocol power adapter,allows 15V/20V output and supports charging with mobile phones,mobile power and other devices.
- Type-C interface
- Connect to a display, docking station or any other external device for audio/video output or data transmission.
- Connect to a laptop, smartphone or tablet for charging.
- This port supports PD protocol power adaptetallows 15V/20V output and supports charging with mobile phones,mobile power and other devices.
- Left speaker
- Built-in speaker for voice output
- Right speaker
- Built-in speaker for voice output
- Charge indicator
- Two indications: red/green.
- Red/green (red: power adapter is plugged in; green: fully charged; light off: power adapter is plugged off; red/green flicker in alternation: no battery is detected.)
- Running indicator
- Blue indication.
- Stay on after starting up: show breathing light in sleep mode.
- L1/L2
- Handle’s left trigger key, wherein L2 is intended for linear emulation.
- In gaming, it is hooked by the left index finger to implement some actions and forms key combinations with other keys from time to time.
- R1/R2
- Handle’s right trigger key, wherein R2 is intended for linear emulation.
- In gaming, it is hooked by the right index finger to implement some actions and forms key combinations with other keys from time to time. In mouse mode, press R2 to speed up mouse movement.
- Display screen
- Image display, available for touch control.
- Handle/mouse toggle key
- Switch between handle mode and mouse mode.
- In the handle mode, handle is activated. Mouse is controlled via touch panel only but keyboard is available for input. In the mouse mode, handle is off but mouse is activated. The handle rockers emulate the trajectory of mouse movement, L1 key emulates the left key of mouse and R1 key emulates the right key of mouse.
- Left rocker
- Handle’s left rocker
- In mouse mode, the left rocker is intended for upward/downward scrolling.
- Right rocker
- The handle’s right rocker can act as the mouse wheel
- In the mouse mode, the right rocker becomes a mouse wheel.
- D-Pad key
- Handle’s direction key
- After switching to the mouse mode, up and down arrow keys are ” , keys on keyboard and the left arrow key is PgDn on keyboard.
- ABXY key
- Gaming function key
- Each function key has two screen printing characters, facilitating identification of emulator games–PS and Xbox.
- SELECT key
- In the handle mode. SELECT key is often used for selecting in gaming control settings.
- SELECT key is needed in typical shortcut login and goldfinger activation.
- START key
- Typically for confirming that game gets started.
- Xbox key
- For Xbox 360 handle only.
- In Xbox gaming through streaming, Xbox key acts as the handle switch. Besides, it also has functions of “back to home”, long press to shut down”, “screen capture and video recording’. ‘sync display s witch’, etc.
- Power key
- For startup, shutdown, sleep, wakeup.
- Press 2-3s to start up. In the on status, quickly press to sleep and then press again to wake up. Long press 7-8s to shut down.
- keyboard
- For entering English letters, figures, punctuation marks, etc. Slide to turn on.
- The keyboard has backlight,the white backlight is always on after sliding the cover.
- Earphone/ microphone interface
- 3.5mm earphone/microphone two-in-one interface.
- Microphone port
- Independent microphone port
- MicroSD card slot
- Available for any MicroSD card.
- Available for any MicroSD card with A2/U3/C1ON30 specification and downward compatible to any MicroSD card with Al/U1/C10 specification.
- Air inlet
- Cold air inlet
- Air outlet
- Hot air outlet.
- Volume +1-
- `Control volume of speaker.
- Fingerprint unlock
- One-key unlock system a Unlock locked Windows desktop based on fingerprint information entered.
- Custom key
- User-defined function key
- Through the ‘WinControls” integrated in the system, modify the custom key to any other key (modify the key value), e.g., ESC key or Ll key.
- OFN (Optical Finger Navigation)
- Mouse function, support pressing down to achieve “Enter
- 4G LTE module fixed card slot
- For fixing 4G LTE module
- Reset key
- It is used to restore default settings of BIOS.
- When the device is powered off, you may use a pin for retrieving card of your mobile phone or a paper clip, and insert it into and depress the BIOS reset button to restore factory settings of BIOS.
Charge device
Charge device by power adapter
The device has a built-in (non-detachable) rechargeable battery. Connect
accessory power adapter and Type-C interface USB cable to outlet. When the
charge indicator turns red, it indicates charging; when it turns green, it
indicates fully charged. In shutdown or sleep mode, battery is charged faster.
Precautions for charging
Please use accessory power adapter and Type-C interface USB cable to charge the device.
-
Use of third party parts may give rise to performance degradation in the device and have potential safety threats.
Please charge the device somewhere cool and ventilated within appropriate temperature range. -
Charging in high-temperature environment may cause damage to the device.
-
Charging duration varies by temperature and usage of battery.
-
Running for a long time or charging, the device may get heated on the surface, which is normal. If the device gets too hot, please disable some functions and stop charging.
Understand battery status
You may determine the current battery status based on electric energy icon on screen.
- When the device is powered on, the battery icon will indicate connected.
- When the device is working, move the cursor to the battery icon to view remaining electric energy and available time.
- Battery is a consumable. In the event of a sharp decline in standby time, please do not replace the battery at discretion. Instead, please contact the store’s customer service staff for getting an original battery.
Start up and shut down device
Before starting up for the first time ever, please connect the power adapter
and Type-C interface USB cable to charge the device. In shutdown or sleep
mode, short press the power key till the screen is turned on to start up or
wake up the device.
When the device runs well, click :: > di to make the device enter sleep,
shutdown or reboot status.
Long press the power key for 1 Os to force close the device. The force close
may cause loss of data unsaved.
Keyboard function key
Blue characters in the device keyboard are defaulted in the hot key mode, which are intended for executing common tasks easily through combination with Fn key.
Reduce screen luminance
Highlight screen luminance
Turning on or off the keyboard backlight
A print screen key
Implement F1, F2—F12
Home key
PgUp key
PgDn key
End key
Specification
| Environmental Requirement | Temperature: 0C-70C° |
|---|
Humidity: 20-80 (%RH)
Audio Output| 3.5mm
Video Output| 4K Video Output
4K Resolution
Input Power|
20V — 3.25A
TDP| 28W
Standby Power| 0.4W
Dimension| 220x92x28mm
Net Weight| 598g approx.
SN| Description| Unit(s)
---|---|---
1| GPD WIN 4| 1
2| Type-C Data Cable| 1
3| Power Adapter| 1
4| User Manual| 1
Note: Please use the origin AC Adapter, as low input voltage can cause insufficient power supply. Tips: Accessories in kind prevail
GPD Warranty Card
Manufacturer: GPD
Address:Room 1006 Block 4D,Software Industry Base,Hight tech park,Nanshan
district,Shenzhen. Guangdong Province,518000,china
Tel: +86 755 86572275
Site: www.gpd.hk
Facebook
Twitter
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.