blueiot BT1000-d RTLS Tag User Manual
- June 10, 2024
- blueiot
Table of Contents
Blueiot RTLS Tag
BT1000-d
User Manual V1.0
BlueIOT (Beijing) Technology Co., Ltd
http://www.blueiot.com/
Email: global@blueiot.com
BT1000-d RTLS Tag
Copyright ©2020 BlueIOT (Beijing) Technology Co., Ltd. All rights reserved.
Any part of this manual, including text, pictures, graphics, etc., belongs to
BlueIOT (Beijing)
Technology Co., Ltd. Without written permission, any unit or individual may
not extract, copy, translate, or modify this manual in whole or in part by any
means. Unless otherwise agreed, the company makes no representations or
warranties of any kind, express or implied, with respect to this manual.
Trademark statement
“BlueIOT” trademarks, logos, and trademark combinations are registered
trademarks of BlueIOT (Beijing) Technology Co., Ltd.
- Products described in the Manual (including hardware and software) are all provided in the “current situation” within the maximum range allowed by laws, and there may exist defects, errors or faults. The Company does not provide express or implied guarantee in any form, or compensate for any special, incidental, accidental or indirect damages caused by using the Manual or products of the Company.
- The Company reserves the right to modify and adjust the product design or specifications and will not send special notice in the case of being necessary to modify and adjust the design, functions or technical indicators due to technological development.
- The “BlueIOT” series of products (hereinafter referred to as “equipment”) provided by our company are management aids, which cannot replace the safety management system, measures and rescue programs of dangerous operations, nor can they replace the supervision system in operation management and measures.
- During the use of this product, please remind the operator not to reduce safety awareness due to the use of auxiliary tools, timely charge the device when the device is low, and regularly check the device. If you have any questions, please contact our company for repair or replacement.
Tag Introduction
BT1000-d Blueiot RTLS Tag Light, thin and compact, only 7.5mm in thickness, easy to use and deploy.
Screen Display
BT1000-d asset tag usesCR 2032 battery, when using, it should be noted that
the tag should be in a state of power. The LED indicator on the tag flashes
every 5 seconds, indicating the current battery. When the flashing color is
green, the power is sufficient, the yellow is medium, and the red is about to
run out, and the battery needs to be replaced as soon as possible.
When the power supply of the tag is insufficient, the low power alarm message
will be uploaded.
After the alarm is in effect, the LED indicator of the tag will flash in
orange, indicating that it is currently in a low power alarm state.
2.1 Battery Replacement
During installation, please gradually open it to the outside along the gap
near the side corner of the button. After the shell surface is removed, pull
out the insulation sheet in the battery tank and close the shell surface
again until the battery is installed.
When replacing the battery, remove the shell face and replace the battery directly, with the positive electrode facing up, as shown in the figure below.
2.3 Hand Out/Back
To hand out tags, use a card reader to enter the tag ID into the locating
system or do it manually, and then location data will be recorded. To hand
back, use a card reader to remove the tag ID or do it manually, and then
location data will no longer be recorded.
Work Mode
3.1 Normal Mode
A tag in the normal mode automatically enters the mode of locating. In this
mode, the tag sends a locating signal to the BlueIOT anchor at a default
refresh interval of 200 milliseconds. This value can be set on the service
configuration software.
3.2 Sleep Mode
A tag in the sleep mode will enter a low power consumption status where the
refresh interval for the tag to send locating signals to the anchor will be
extended to 10 seconds. When the tag stays static for a time longer than the
set value for inactivity, it will automatically switch to the sleep mode; when
the tag moves or vibrates, it will immediately get back to the normal mode
from the sleep mode. The static time from normal mode to sleep mode is 15
seconds by default, and this value can be set from 1 to 180 seconds in the
Server Management Software.
Notes
- Do not throw this product into the fire in case of explosion.
- Do not dismantle the shell of this product at will in case of injury.
- This product is designed according to the indoor use environment, can not exposed to water or liquid splashing places, so as to avoid short circuit caused by fire or electric shock accident;
- If the equipment is abnormal, please contact the manufacturer, do not remove or modify the equipment in any way;
FCC Warning statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation Information to user.
Any Changes or modifications not expresslyapproved by the party responsible
forcompliance could void the user’s authority tooperate the equipment.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Specifications
Product Name：Blueiot RTLS Tag
Product Model：BT1000-d
Net Weight：14g
Size：43.5mm×43.5mm×7.5mm
Frequency Band：2.402GHz – 2.480GHz
Operating Temperature：-20 – 70℃
Storage Temperature：-40 – 85℃
Operating Humidity：10% – 90% non-condensing
Storage Humidity：5% – 95% non-condensing
Radio Frequency Identification：Built-in RFID
Warranty Information
The warranty period for the host of this product is one year from the date of
purchase, during which Blueiot after-sale experts will be responsible for the
maintenance under normal use.
Warranty does not apply to：
- Damage caused by unauthorized repairing, misuse, collision, negligence, abuse, inflow, accident or modification or alteration.
- Damage caused by improper use of accessories not for this product.
- Man-made surface damage, such as scratches, dents and hollows.
- Damage caused by force majeure.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>