MEIHUA FLA010 LED Flood Light User Manual
- June 15, 2024
- MEIHUA
Table of Contents
MEIHUA FLA010 LED Flood Light
Thank you for purchasing Meihua products. To ensure a better shopping
experience, please follow the instructions for use step by step.
If you have any questions about our products, please contact our customer
service, our after-sales team will contact you at the first time and resolve
any problems about the products.
E-mail:
meihua@meihuaintelligent.com
service@meihua-ledlight.com
WARNING
- The LED module can’t be replaced, you need to replace the entire lamp if it damaged or reach the service life.
- If the wire is damaged, the lamp can no longer be used and needs to be scrapped.
- If the casing breaks or water enters, the lamp can no longer be used and needs to be scrapped.
- Do not stare at the LED light-emitting surface closely for a long time, to prevent the hurt of the eye.
- Under no circumstances should the luminaire be covered by a thermal pad or similar material.
- The Lamp requires professional electrician to install.
- The IP66 waterproof grade is just for rainproof, the lamp can not be immersed in water, otherwise it may cause leakage.
- The terminal block is not included. (Please prepare the terminal block according to your actual needs)
DIMENSION
PARAMETER
| Model | Power | Lumen | Lighting Range | Installation Height | A | B |
|---|---|---|---|---|---|---|
| Shell | Input Lead | Shell | Input Lead | |||
| FLA010 | 10W | 850 | 3-4M | 2.5-3.5M | Aluminum | LIN/½ |
| FLA015 | 15W | 1200 | 3-4M | 2.5-3.5M | Aluminum | LIN/½ |
| FLA020 | 20W | 1700 | 3-4M | 3.0-5.0M | Aluminum | L/N/½ |
| FLA025 | 25W | 2100 | 3-4M | 3.0-5.0M | Aluminum | LIN/½ |
| FLA030 | 30W | 2600 | 4-6M | 3.5-5.0M | Aluminum | L/N/½ |
| FLA035 | 35W | 3000 | 4-6M | 3.5-5.0M | Aluminum | LIN/½ |
| FLA050 | sow | 4300 | 6-8M | 5.0-7.0M | Aluminum | LIN/½ |
| FLA054 | 54W | 4700 | 6-8M | 5.0-7.0M | Aluminum | LIN/½ |
| FLA060 | 60W | 5200 | 6-8M | 5.0-7.0M | Aluminum | LIN/½ |
| FLA100 | 100W | 9000 | 10-12M | 7.0-10.0M | Aluminum | LIN/½ |
| FLA150 | 150W | 13500 | 10-12M | 10.0-12.0M | Aluminum | LIN/½ |
Input voltage: US: AC 120V/60HZ EU/UK: AC 230V/50HZ
Color temperature: 2700K -6500K
CRI: __ >70
IP rating: IP66
Ta: -25-40 °C
Component and structure diagrams
How to install
Step 1 : Drill two mounting holes according to the distance of the screw holes on the bracket.
Step 2: Put expansion screws in the prepared mounting holes, then place the bracket in the mounting position and fix with screws.
Step 3 : Adjust the direction of the light according to your needs.
Step 4 : Connect the wires.
Routine maintenance
- To ensure better lighting, please clean the fixtures regularly.
- Before maintenance, make sure the power is disconnected.
- To avoid damage of the lamp, please do not clean it with chemicals.