CNC RACING PSB13 Triple Clamps Steering Head Base Instruction Manual
- July 31, 2024
- CNC RACING
Table of Contents
CNC RACING PSB13 Triple Clamps Steering Head Base
Specifications
- Lower Steering Head: Testa Di Sterzo Inferiore
- Steering Stem Screw: CANNOTTO VITE
- Nut Screw: DADO VITE
- Dimensions: M6x25, M6, M8x30
Product Usage Instructions
Mounting Instructions:
WARNING: The mounting of the product must be carried out by skilled personnel.
Maintenance and Cleaning:
WARNING: Do not use acid or alkaline-based degreasers on anodized and/or Lexan parts. Use neutral soaps. Wash the bike when cold, not hot. Avoid using a pressure washer.
Additional Notes:
- Parts 1 and 2 are preassembled.
- Set the steering stops as indicated in the shop manual.
- It is recommended to buy new parts instead of removing them from the OEM assembly.
FAQ
- Q: Can I use the products on motor vehicles for public road use?
- A: Any use of the products on motor vehicles intended for public roads requires prior registration with the competent authorities.
- Q: What happens if I use the products for a purpose other than racing?
- A: The vendor declines any liability for any incidents that might occur if the products are used for purposes other than racing.
Product Information
G CNC RACING reserves the right, in its sole discretion, to modify the product and this information at any time without prior notice.
Use of the Products, usage precautions and disclaimer. The Products covered by the purchase/sales contract concluded between the parties and, in general, all the Products manufactured and/or marketed by the Vendor are products intended for competitive use exclusively in private spaces. Any use of the Products on motor vehicles intended to be used on public roads requires prior registration with the competent authorities. By accepting these Conditions of Sale, the Customer declares to be well aware of the above circumstances, to expressly accept them and to have understood the risk involved in violating the precautions indicated above. In any case, should the Customer violate the precautions regarding the use of the Products indicated above, by using the Products for a use other than racing, the Vendor declines any liability for anything that might happen to the Customer for any reason whatsoever.
Parts
| POS. | QT. | COD. | DESCRIZIONE | DESCRIPTION | DIMEN. |
|---|---|---|---|---|---|
| 1 | 1 | YP002287010 | TESTA DI STERZO INFERIORE | LOWER STEERING HEAD | |
| 2 | 1 | YP002286070 | CANNOTTO | STEERING STEM | |
| 3 | 2 | YC014041012 | VITE | SCREW | M6x25 |
| 4 | 2 | YC021040312 | DADO | NUT | M6 |
| 5 | 4 | YP002009040 | VITE | SCREW | M8x30 |
Installation Instruction
WARNING The mounting of the product it must be realized from skilled personnel.
MAINTENANCE AND CLEANING: WARNING
LEXAN PARTS: DO NOT USE acid or alkaline-based degreasers. Use neutral soaps.
Wash on a cold bike, never hot. No pressure washer.