CNC RACING YP002178010 Ducati Diavel Triple Clamps Instruction Manual
- June 1, 2024
- CNC RACING
Table of Contents
CNC RACING YP002178010 Ducati Diavel Triple Clamps
The products are intended for competitive use exclusively in private spaces. Any use of the products on motor vehicles intended for public road use requires prior registration with the competent authorities. The customer acknowledges and accepts the risks involved in not adhering to these conditions.
Specifications
| POS. | QT. | COD. | DESCRIPTION | DIMEN. |
|---|---|---|---|---|
| 1 | 1 | YP002178010 | UPPER HEAD STOCK | M8x30 |
| 2 | 1 | YP002009040 | SCREW VIBRATION DAMPER | M8x25 |
| 3 | 2 | YC183000030 | SCREW | |
| 4 | 4 | YP002008040 | SCREW |
Legend
- Lubricare / Lubricate
- Only first threads should be lubricated.
- Non Lubricare / Do Not Lubricate
- Do not lubricate.
- Installare secondo prescrizioni del costruttore
- Install according to the manufacturer requirements.
- GH350
- Sold separately.
FAQ
- Can I use any type of degreaser on the anodized or LEXAN parts?
- No, you should not use acid or alkaline-based degreasers. Only neutral soaps should be used.
- Is it safe to wash the motorcycle when it is hot?
- No, you should always wash the motorcycle when it is cold to avoid damage to the parts.
- Can I use a pressure washer for cleaning?
- It is advised not to use a pressure washer on the anodized or LEXAN parts.
- Who should perform the installation of the product?
- Installation should be done by skilled personnel only.
- Are there any precautions for using the products on public roads?
- Yes, products intended for competitive use in private spaces must be registered with competent authorities before use on public roads.
Parts
| POS. | QT. | COD. | DESCRIPTION | DIMEN. |
|---|---|---|---|---|
| 1 | 1 | YP00217 010 | UPPER HEAD STOCK | |
| 2 | 1 | YP0020090 0 | SCREW | M8x30 |
| 3 | 2 | Y 1 0000 0 | VIBRATION DAMPER | |
| 4 | 4 | YP00200 0 0 | SREW | M8x25 |
WARNING: The mounting of the product it must be realized from skilled
personnel.
Images used for illustrative purposes only
Installation Instructions
Overview
MAINTENANCE AND CLEANING
WARNING
- ANODIZED and / or LEXAN PARTS
- DO NOT USE acid or alkaline based degreasers.
- Use neutral soaps.
- Wash on a cold bike, never hot.
- No pressure washer.
CNC RACING reserves the right, in its sole discretion, to modify the product and this information at any time without prior notice.
Disclaimer
Use of the Products, usage precautions and disclaimer.
The Products covered by the purchase/sales contract concluded between the
parties and, in general, all the Products manufactured and/or marketed by the
Vendor are products intended for competitive use exclusively in private
spaces. Any use of the Products on motor vehicles intended to be used on
public roads requires prior registration with the competent authorities.
By accepting these Conditions of Sale, the Customer declares to be well aware of the above circumstances, to expressly accept them and to have understood the risk involved in violating the precautions indicated above. In any case, should the Customer violate the precautions regarding the use of the Products indicated above, by using the Products for a use other than racing, the Vendor declines any liability for anything that might happen to the Customer for any reason whatsoever.