CNC Racing PST21 Triple Clamps Top Yoke Instructions

: July 31, 2024
: CNC RACING

Table of Contents

PST21 Triple Clamps Top Yoke
Product Information
Specifications:
Product Usage Instructions:
Q: Can I use any type of degreaser for cleaning the anodized
Q: What torque value should be applied when mounting the M8x30
Q: Can I make modifications to the product on my own?
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

PST21 Triple Clamps Top Yoke

“`html

Product Information

Specifications:

Part Name: Steering Head Screw
Part Number: YP002285010
Size: M8x30
Torque: 20 Nm

Product Usage Instructions:

Mounting Instructions:

The mounting of the product should be carried out by skilled
personnel.

Modifications:

CNC RACING reserves the right to modify the product and related
information without prior notice.

Assembly:

Assemble the components following the workshop manual
instructions.

Cleaning Instructions:

For anodized and/or LEXAN parts, do not use acid or
alkaline-based degreasers. Use neutral soaps for cleaning. Wash
with cold water, never hot, and avoid using a pressure washer.

FAQ (Frequently Asked Questions)

Q: Can I use any type of degreaser for cleaning the anodized

parts?

A: No, avoid using acid or alkaline-based degreasers. Use
neutral soaps for cleaning.

Q: What torque value should be applied when mounting the M8x30

screw?

A: The torque value for the M8x30 screw is 20 Nm.

Q: Can I make modifications to the product on my own?

A: It is recommended that modifications to the product be done
by skilled personnel.

“`

Il montaggio del prodotto deve essere eseguito da personale specializzato. The mounting of the product it must be realized from skilled personnel.

ITA CNC RACING si riserva il diritto, a sua esclusiva discrezione, di apportare modifiche al prodotto e a queste informazioni in qualsiasi momento e senza preavviso.
Uso dei Prodotti, precauzioni d’uso ed esclusione di responsabilità. I Prodotti oggetto del contratto di compravendita concluso tra le parti e, in generale, tutti i Prodotti realizzati e /o commercializzati dal Venditore sono prodotti destinati all’uso agonistico ed esclusivamente su spazi privati. L’eventuale utilizzo dei Prodotti su motoveicoli destinati alla circolazione su strada pubblica richiede necessariamente la preventiva immatricolazione presso gli uffici competenti. Il Cliente, con l’accettazione delle presenti Condizioni di Vendita, dichiara di bene conoscere le circostanze di cui sopra, di accettarle espressamente e di aver compreso il rischio che rappresenta contravvenire alle precauzioni sopra rappresentate. Il Venditore, in ogni caso, ove il cliente dovesse contravvenire alle precauzioni d’uso dei Prodotti sopra rappresentate, utilizzando i Prodotti per un uso diverso da quello agonistico, declina ogni responsabilità per qualsiasi fatto e/o danno dovesse derivare al Cliente a qualsiasi titolo e per qualsiasi ragione.
ENG CNC RACING reserves the right, in its sole discretion, to modify the product and this information at any time without prior notice.
Use of the Products, usage precautions and disclaimer. The Products covered by the purchase/sales contract concluded between the parties and, in general, all the Products manufactured and/or marketed by the Vendor are products intended for competitive use exclusively in private spaces. Any use of the Products on motor vehicles intended to be used on public roads requires prior registration with the competent authorities. By accepting these Conditions of Sale, the Customer declares to be well aware of the above circumstances, to expressly accept them and to have understood the risk involved in violating the precautions indicated above. In any case, should the Customer violate the precautions regarding the use of the Products indicated above, by using the Products for a use other than racing, the Vendor declines any liability for anything that might happen to the Customer for any reason whatsoever.

5
M8x30
20 Nm
2 üS

LEGENDA / LEGEND

Lubrificare ü/ Lubricate ü

Non lubrificare û / Do not lubricate û

Solo primi filetti S / First threads only S

1

OEM Parte della dotazione originale Original equipment manufacturer’s part

OEM

Immagini usate a fini esclusivamente illustrativi images used for illustrative purposes only

üS 3

5
M8x25

18 Nm