CNC RACING IFA02 Fluid Tank Mounting Kit Installation Guide
- June 1, 2024
- CNC RACING
Table of Contents
CNC RACING IFA02 Fluid Tank Mounting Kit
The mounting of the product must be realized by skilled personnel.
images used for illustrative purposes only
Information
CNC RACING reserves the right, in its sole discretion, to modify the product and this information at any time without prior notice.
Use of the Products, usage precautions, and disclaimer.
The Products covered by the purchase/sales contract concluded between the
parties and, in general, all the Products manufactured and/or marketed by the
Vendor are products intended for competitive use exclusively in private
spaces. Any use of the Products on motor vehicles intended to be used on
public roads requires prior registration with the competent authorities.
By accepting these Conditions of Sale, the Customer declares to be well aware
of the above circumstances, to expressly accept them, and to have understood
the risk involved in violating the precautions indicated above. In any case,
should the Customer violate the precautions regarding the use of the Products
indicated above, by using the Products for a use other than racing, the Vendor
declines any liability for anything that might happen to the Customer for any
reason whatsoever.
PARTS
images used for illustrative purposes only
| POS. | QT. | COD. | DESCRIPTION | DIMEN. |
|---|---|---|---|---|
| 1 | 1 | YP001504070 | PIN | |
| 2 | 1 | YC013040740 | SCREW | M6x16 |
| 3 | 1 | YC053040120 | SPRING WASHER | M6 |
| 4 | 1 | YP001943010 | SPECIAL SCREW | |
| 5 | 1 | YC031010813 | O-RING | |
| 6 | 1 | YP002187340 | HAND GUARD ARM RH |
Installation Instructions
ANODIZED and/or LEXAN PARTS:
DO NOT USE acid or alkaline-based degreasers. Use neutral soaps. Wash on a cold bike, never hot. No pressure washer.
Product Using Instructions and Product Care
Mounting and Modification Disclaimer
The mounting of the product must be realized by skilled personnel. CNC
RACING reserves the right, in its sole discretion, to modify the product and
this information at any time without prior notice.
Use of the Products and Safety Precautions
The Products covered by the purchase/sales contract concluded between the
parties and, in general, all the Products manufactured and/or marketed by the
Vendor are products intended for competitive use exclusively in private
spaces. Any use of the Products on motor vehicles intended to be used on
public roads requires prior registration with the competent authorities. The
Customer declares to be well aware of the above circumstances, to expressly
accept them and to understand the risk involved in violating the indicated
precautions. The Vendor declines any liability for anything that might happen
to the Customer for any reason whatsoever, should the Customer violate the
precautions regarding the use of the Products.
Care Instructions
Care Instructions for Anodized and/or Lexan Parts
ANODIZED and/or LEXAN PARTS: DO NOT USE acid or alkaline-based degreasers.
Use neutral soaps. Wash on a cold bike, never hot. No pressure washer.
Assembly Diagram Description
The diagram illustrates the assembly of various components onto a
motorcycle part. The legend indicates that item 3 is an OEM part that replaces
the pump OEM screw. Annotated images show the installation process and the
specific location of the OEM screws.
FAQ
- Who should perform the product mounting?
- The product mounting must be performed by skilled personnel.
- Can the manufacturer modify the product and information?
- Yes, CNC RACING reserves the right to modify the product and information without prior notice.
- What are the intended uses of the products?
- The products are intended for competitive use exclusively in private spaces, and any use on public roads requires prior registration with the authorities.
- What are the care instructions for anodized and/or Lexan parts?
- Do not use acid or alkaline-based degreasers, use neutral soaps, wash on a cold bike, never hot, and do not use a pressure washer.