TELTONIKA RUT140 Ethernet Router User Guide
- July 31, 2024
- teltonika
Table of Contents
RUT140 Ethernet Router
“`html
Product Information
Specifications
- Model: RUT140
- RF Technologies: WiFi
- Max RF Power: 20 dBm@WiFi
- WiFi Frequency: 2400~2500 MHz
- WiFi Antenna VSWR: 50
Product Usage Instructions
Safety Information
Before operating the device, review safety recommendations to
minimize accidents. Follow local safety regulations and
device-specific safety instructions.
Installation
1. Connect the WiFi antenna to the device.
2. Power on the RUT140 by connecting it to a power source.
Configuration
1. Access the device interface using a web browser and the
provided IP address.
2. Configure WiFi settings as needed for your network.
Troubleshooting
If you encounter connectivity issues, check the antenna
connection and signal strength.
FAQ
Q: How do I reset the device to factory settings?
A: Locate the reset button on the device, press and hold it for
10 seconds until the device restarts.
Q: What is the default IP address of the RUT140?
A: The default IP address is usually 192.168.1.1, refer to the
manual for confirmation.
“`
www.ime.de
https://wiki.teltonika-networks.com/view/QSG_RUT140
QSG RUT140
Main Page > RUT Routers > RUT140 > QSG RUT140
This Wiki page contains the online version of the Quick Start Guide (QSG) for
the RUT140 Router. Here, you will find an overview of the various physical
interfaces of a RUT140, hardware installation instructions, first login
information, device specifications, conformity, and general safety
information. It is highly recommended that you acquaint yourself with the
Quick Start Guide before using the device. You can also locate a printed short
version of the Quick Start Guide in your device’s packaging box.
Contents
· 1 Safety information – 1.1 General
· 2 Compliance – 2.1 CE Declaration of Conformity – 2.2 FCC – 2.3 ISED Canada
– 2.4 Markings – 2.5 RF exposure
· 3 Product Safety and Use – 3.1 Operating conditions – 3.2 Faulty and damaged
products – 3.3 Electrical safety – 3.4 Product handling
· 4 Quick Start Guide – 4.1 Front view – 4.2 Back View – 4.3 Connectors – 4.4
Hardware installation – 4.5 Configure your computer LAN (Windows) – 4.6
Configure your computer Wi-Fi (Windows) – 4.7 Login to device
Safety information
Before starting operating the device, please review recommendations and
precautions to minimize the possibility of accidents. Safety precautions
presented are supplementary and subject to the local safety regulations. When
various operations are executed on the device, the user must fully follow the
safety instructions and recommendations provided with the device.
General
Radio specifications RF technologies WiFi Max RF power 20 dBm@WiFi
Bundled accessories specifications*
www.ime.de
WiFi antenna
2400~2500 MHz, 50, VSWR<2.5, gain** 5dBi, omnidirectional, RP-SMA male connector
- Order code dependant.
** Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.
RUT140 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
Compliance
CE Declaration of Conformity
, TELTONIKA NETWORKS , RUT140
[BG] Bulgarian 2014/53/EU
[HR] Croatian
Ovim TELTONIKA NETWORKS izjavljuje da je ovaj RUT140 u skladu s bitnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU
[CZ] Czech
TELTONIKA NETWORKS tímto prohlasuje, ze RUT140 spluje základní pozadavky a vsechna píslusná ustanoveni Smrnice 2014/53/EU
[DK] Danish
Undertegnede TELTONIKA NETWORKS erklærer herved, at følgende udstyr RUT140 overholder de væsentlige krav og øvrige relevante krav i direktiv 2014/53/EU
[NL] Dutch
Hierbij verklaart TELTONIKA NETWORKS dat het toestel I RUT140 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 2014/53/EU
[EE] Estonian
Käesolevaga kinnitab TELTONIKA NETWORKS seadme RUT140 vastavust direktiivi 2014/53/EU põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele
[FI] Finish
TELTONIKA NETWORKS vakuuttaa täten että RUT140 tyyppinen laite on direktiivin 2014/53/EU oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen
[FR] French
TELTONIKA NETWORKS déclare que cette RUT140 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU
[DE] German
Hiermit erklärt TELTONIKA NETWORKS, dass dieser RUT140 den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinie 2014/53/EU entspricht
[GR] Greek
TELTONIKA NETWORKS RUT140 2014/53/EU
A TELTONIKA NETWORKS ezzennel kijelenti, hogy a RUT140 típusú berendezés
[HU] Hungarian teljesíti az alapvet követelményeket és más 2014/53/EU
irányelvben meghatározott vonatkozó rendelkezéseket
[IE] Irish
Leis seo, dearbhaíonn TELTONIKA NETWORKS go gcomhlíonann an RUT140 seo bunriachtanais agus forálacha ábhartha eile Threoir 2014/53/EU
www.ime.de
[IT] Italian
Con la presente, TELTONIKA NETWORKS dichiara che questo RUT140 è conforme ai requisiti essenziali e ad altre disposizioni pertinenti della Direttiva 2014/53/EU
[LV] Latvian
Ar so TELTONIKA NETWORKS deklar, ka RUT140 atbilst Direktvas 2014/53/EU btiskajm prasbm un citiem ar to saisttajiem noteikumiem
[LT] Lithuanian
Siuo dokumentu UAB TELTONIKA NETWORKS deklaruoja, kad sis RUT140 atitinka esminius reikalavimus ir kitas 2014/53/EU Direktyvos nuostatas
[MT] Maltese
Hawnhekk, TELTONIKA NETWORKS tiddikjara li dan l-RUT140 huwa konformi mar- rekwiiti essenzjali u dispoizzjonijiet rilevanti ora tad Direttiva 2014/53/EU
[NO]
Norwegian
TELTONIKA NETWORKS Erklærer herved at grunnleggende krav og øvrige relevante krav
RUT140 er i samsvar med i direktiv 2014/53/EU
de
[PL] Polish
Niniejszym TELTONIKA NETWORKS deklaruje e RUT140 jest zgodny z zasadniczymi wymaganiami i innymi wlaciwymi postanowieniami Dyrektywy 2014/53/EU
[PT]
Portuguese
Eu, TELTONIKA NETWORKS declaro que o RUT140 cumpre os requisitos essenciais e outras provisões relevantes da Directiva 2014/53/EU
Prin prezenta, TELTONIKA NETWORKS declar c aparatul RUT140 este în
[RO] Romanian conformitate cu cerinele eseniale i cu alte prevederi pertinente
ale Directivei 2014/53/EU
[SK] Slovak
Spolocnos TELTONIKA NETWORKS týmto vyhlasuje, ze smerovac RUT140 je v súlade so základnými poziadavkami a alsími príslusnými ustanoveniami smernice 2014/53/EU
[SI] Slovenian
TELTONIKA NETWORKS izjavlja, da je ta RUT140 v skladu z bistvenimi zahtevami in drugimi relevantnimi dolocili direktive 2014/53/EU
[ES] Spanish
Por la presente, TELTONIKA NETWORKS declara que este RUT140 cumple con los requisitos esenciales y otras exigencias relevantes de la Directiva 2014/53/EU
[SE] Swedish
Härmed intygar TELTONIKA NETWORKS att denna RUT140 är i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 2014/53/EU
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept
any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
www.ime.de
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. Consult the dealer or
an experienced radio/TV technician for help.
FCC Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
ISED Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference; 2. This device must accept any
interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter
tout brouillage radioélectrique subi, mzme si le brouillage est.
Markings
Detailed compliance information is available at the following internet
address: wiki.teltonikanetworks.com/view/Certificates.
This sign means that is necessary to read the User’s Manual before you start
using the device. This sign on the package means that all used electronic and
electric equipment should not be mixed with general household waste. Hereby,
TELTONIKA NETWORKS declares that this RUT140 is in compliance with the
essential requirements and other relevant provisions of Directives 2014/53/EU,
2011/65/EU. The full text of the EU Declaration of Conformity is available at
the following internet address: https://wiki.teltonika-
networks.com/view/RUT140. Hereby, TELTONIKA NETWORKS declares that this RUT140
is in compliance with Radio Equipment Regulations 2017, The Restriction of the
Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the UK Declaration of Conformity is
available at the following internet address: https://wiki.teltonika-
networks.com/view/RUT140.
RF exposure
This device meets the official requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by authorized agencies. The device
must be used with a minimum separation of 20 cm from a person’s
www.ime.de
body to ensure compliance with RF exposure guidelines. Failure to observe
these instructions could result in your RF exposure exceeding the applicable
limits.
External antennas used with RUT140 must be installed to provide a distance of
at least 20 cm from any people and must not be co-located or operated in
conjunction with any other antenna or transmitter.
Any external antenna gain must meet RF exposure and maximum radiated output
power limits of the applicable rule section.
Maximum transmission power
WiFi
20 dBm
FCC Radiation Exposure Statement: This device complies with the relevant FCC
RF radiation exposure limit set forth for an uncontrolled environment. The
antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter and must be installed to
provide a separation distance of at least 20 cm from all persons.
ISED Canada Radiation Exposure Statement: This equipment complies with IC
RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm
between the radiator and your body.
Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-102
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec une distance minimale de 20 cm entre le radiateur et votre
corps.
Product Safety and Use
Operating conditions
Operating temperature: -40° to +75° Celsius Humidity should be in the range of
10% to 90% (non-condensing). Only use the device in dry environments. Out of
direct sunlight Away from heat source, corrosive substances, salts, and
flammable gases
Attention: operation outside the permissible range can considerably shorten
the service life of the device.
Faulty and damaged products
Do not attempt to disassemble the device or its accessories. Only qualified
personnel must service or repair the device or its accessories. If your device
or its accessories have been submerged in water punctured or subjected to a
severe fall, do not use until they have been checked at an authorized service
center.
Electrical safety
Only use approved accessories. Do not connect with incompatible products or
accessories.
www.ime.de
It is recommended to ground devices with grounding terminals before connecting
them to power. Failure to ground appropriately might result in a shock hazard.
The cross-sectional area of the protective grounding conductor should be at
least 1mm2.
Product handling
You alone are responsible for how you use your device and any consequences
related to its use. Use of your device is subject to safety measures designed
to protect users and their environment. Always treat your device and its
accessories with care and keep it in a clean and dust-free place. Do not
expose your device or its accessories to open flames, lit tobacco products,
liquid, moisture, or high humidity. Do not drop, throw or try to bend your
device or its accessories. Do not use harsh chemicals, cleaning solvents, or
aerosols to clean the device or its accessories. Do not paint your device or
its accessories. Do not attempt to disassemble your device or its accessories:
it does not contain any userserviceable parts. For safety reasons, the
equipment should be opened only by qualified personnel. Make sure to use ESD
personal protective equipment while the equipment is serviced. Do not use your
device in an enclosed environment where heat dissipation is poor. Prolonged
use in such space may cause excessive heat and raise ambient temperature,
which will lead to the automatic shutdown of your device for your safety. To
use your device again after such a shutdown, cool it in a well-ventilated
place before turning it on. Please check all national laws and local
regulations for the disposal of electronic products. Do not operate the device
where ventilation is restricted. Do not use or install this product near water
to avoid fire or shock hazards. Avoid exposing the equipment to rain or damp
areas. Arrange power and Ethernet cables so that they are not likely to be
stepped on or have items placed on them. Ensure that the voltage and the rated
current of the power source match the device’s requirements. Do not connect
the device to an inappropriate power source. During a thunderstorm, no
operations should be carried out on the device and cables. The unit must be
powered off where blasting is in progress and explosive atmospheres are
present or near medical life support equipment. Do not leave your device and
its accessories within reach of small children or allow them to play with it.
They could hurt themselves or others and could accidentally damage the device.
Your device contains small parts with sharp edges that may cause an injury
choking hazard. Like any wireless device, this device operates using radio
signals, which cannot guarantee connection in all conditions. Therefore, you
must never rely solely on any wireless device for emergency communications or
otherwise use the device in situations where the interruption of data
connectivity could lead to death, personal injury, property damage, data, or
other loss. The device may become warm during regular use.
Quick Start Guide
Front view Back View Connectors Hardware installation
www.ime.de
Configure your computer LAN (Windows)
1. Ensure the Network connection is Enabled. Go to Start — Control Panel —
Network and Internet — Network and Sharing Center. Click on the Change adapter
settings in the left panel, then right-click on Network Adapter, and select
Enable.
2. Check if IP and DNS are obtained automatically. Right-click on Wireless
Network Adapter and select Properties. Then select Internet Protocol Version 4
and click Properties. 3. If not selected, check to obtain an IP address and
obtain DNS server address automatically. Click OK.
Configure your computer Wi-Fi (Windows)
1. Ensure the Wireless network connection is Enabled. Go to Start — Control
Panel — Network and Internet — Network and Sharing Center. Click on the Change
adapter settings in the left panel, then right-click on Wireless Network
Adapter, and select Enable.
www.ime.de
2. Check if IP and DNS are obtained automatically. Right-click on Wireless
Network Adapter and select Properties. Then select Internet Protocol Version 4
and click Properties. 3. If not selected, check to obtain an IP address and
obtain DNS server address automatically. Click OK.
4. Connect to a wireless network by right-clicking on Wireless Network
Adapter and selecting Connect.
5. Choose the wireless network RUT140 **** from the list and click Connect.
Enter the Wi-Fi password located on the device’s label.
Login to device
www.ime.de
1. To enter the router’s Web interface (WebUI), type http://192.168.1.1 into
the URL field of your Internet browser.
2. When prompted for authentication enter the username admin and enter the
password located on the device information label/engraving.
3. After logging in, you must set a new password for security reasons. You
will not be able to interact with the router’s WebUI until the default
password is changed. The new password must consist of a minimum of 8
characters. Requirements: one uppercase letter, one lowercase letter, and one
digit.
4. Next, the Configuration Wizard will start to help you set up some of the
router’s main operational parameters.
www.ime.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>