KENDAL LIGHTING GU-10 Line Voltage Track Fixtures Instruction Manual
- July 30, 2024
- KENDAL LIGHTING
Table of Contents
GU-10 Line Voltage Track Fixtures
Product Information:
Specifications:
- Connector Type: Track Connector
- Features: ON/OFF functionality, RIB side alignment
Product Usage Instructions:
-
Step 1: Identify the ON/OFF end of the
connector and the track opening. -
Step 2: Insert the ON/OFF end into the track
opening ensuring that the RIB side is aligned with the raised rib
on the track. -
Step 3: Pull the connector away from the
track, starting by pulling it away from the On/Off side first.
Frequently Asked Questions (FAQ):
Q: How do I ensure proper alignment of the connector with the
track?
A: Make sure that the RIB side of the connector
is in line with the raised rib on the track before inserting it
into the track opening.
Q: Can I disconnect the connector in any direction?
A: It is recommended to pull the connector away
from the track by starting from the On/Off side to ensure safe
disconnection.
1. Place the ON/OFF end of the connector into track opening and make sure
that the RIB side is in line with raised rib on the track.
2. Push the other end of the connector into the track. 3. Using small wrench
or coin, turn clockwise 90° to “ON”. 4. To remove the fixture, turn counter-
clockwise 90° to “OFF”,
and pull away from the track (Pull it away from the On/Off side first).
RIB side Côté RIB
Small wrench or coin Petite clé ou pice de monnaie
3
1.Placez le connecteur dans l’ouverture du rail et assurez – vous que le côté
RIB est aligné avec les nervures surélevées sur le rail.
2. Pousser l’autre extrémité du connecteur dans le rail. 3. Utilisez une
petite clé ou une pi ce de monnaie et tournez
90° “on” dans le sens des aiguilles d’une montre. 4. Pour retirer le
projecteur, tournez dans le sens inverse des aiguilles d’une montre 90° sur
“OFF”, et tirez sur le rail (tirez d’abord sur le côté On/Off).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>