Bebe Stars Airplane 3 in 1 Pine Playtime Baby Walker User Manual

Bebe Stars Airplane 3 in 1 Pine Playtime Baby Walker

Specifications

• Product Name: Baby Walker 3in1
• Age Range: 7-18 months up to 12 kgs
• Standards: EU EN 1273:2020, EN 71
• Model Numbers: 4237, 4239, 238, 240

Product Usage Instructions

Safety Instructions
Read the instructions carefully before use and save for future reference. The child should be aged between 7-18 months and able to sit on their own without assistance. Do not use for children who can walk or weigh more than 12 kgs. Do not overload the walker beyond the maximum weight limit of 12 kgs. Always supervise your child while using the walker.

Battery Installation
To insert or replace batteries, undo the screw on the battery compartment cover and open it. Insert batteries ensuring correct polarity, as indicated on the product. Close the compartment securely and tighten the screw. Attach the toy tray to the walker.

Assembly Instructions
Refer to the parts list for component identification. Follow the assembly instructions specific to your language section (EN, BG, GR, RS) to correctly set up the baby walker in either walker, jumper, or pusher mode. Ensure all parts are securely attached before use.

FAQ

• Q: What is the maximum weight limit for this baby walker?
  

  • A: The maximum weight limit is 12 kgs.

• Q: What age range is suitable for this product?
  

  • A: The baby walker is designed for children aged between 7-18 months.

• Q: Can this baby walker be used by children who can already walk?
  

  • A: No, this product is not intended for children who can walk on their own.

AGE RANGE
7-18 months -up to 12 kgs

STANDARDS
1273:2020| EN 71 |

AIRPLANE TRAIN

item: 44223397,44224308

DO NOT USE THIS PRODUCT BEFORE YOU READ AND UNDERSTAND THESE INSTRUCTIONS
ΜΗΝ ΧΡΗΣΙΜΟΠΟΙΗΣΕΤΕ ΤΟ ΠΡΟΪΟΝ ΑΝ ΠΡΩΤΑ ΔΕ ΔΙΑΒΑΣΕΤΕ ΚΑΙ ΚΑΤΑΝΟΗΣΕΤΕ ΠΛΗΡΩΣ ΤΙΣ ΟΔΗΓΙΕΣ

3 in 1

• baby walker
• jumper
• pusher

SAFETY INSTRUCTIONS

Read the instructions carefully before use and save for future reference. The child may be injured if you do not follow these instructions.

• It is intended for children aged about 7-18 months who can sit on their own without assistance. Not intended for children who can walk or weigh more than 12kgs.
• Do not place any load on the walker that could affect stability. The maximum load of the walker is 12kgs.
• Warning: Avoid access to stairs, steps and non-flat surfaces.
• Warning: The child may move quickly and move away when using the walker.
• Avoid access to fireplaces, heaters and cookers.
• Avoid access to hot liquids, electrical cables and other potential hazards.
• Prevent collisions with glass doors, glass balcony doors and furniture.
• Do not move the walker while the baby is inside.
• Do not use the walker if any of its parts are broken or missing.
• Keep the plastic bag away from the baby, there is a risk of suffocation, etc.
• The walker should only be used for a short time (eg 20-30 ‘).
• When using a walker, the child should step on both feet.
• Adjust the height of the position appropriately to prevent falls or injuries.
• Do not use spare parts that are not approved by the manufacturer or distributor.
• Small pieces should only be assembled by adults.

WARNING !!!
Never leave your child unattended!

CAUTION

• Non-rechargeable batteries are not be recharged.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Different type of batteries or new and used batteries are not to be mixed.
• Only batteries of the same or equivalent type as recommended are to be used AA1.5V. Batteries not included.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Electronic toy compartment should put onto the top tray anytime when the baby stays in the baby walker.
• Batteries should be removed from the toy compartment if the product is not going to be used in a short while.

To insert/replace the batteries: Undo the screw on the battery compartment cover and open the compartment. Fit batteries into space provided ensuring they observe the correct polarity (as shown on the product). Close the compartment, replace the screw and tighten. Secure the toy tray onto the walker.

PARTS LIST

1. Upper frame
2. Support parts
3. Jumping function parts (x2)
4. Bo om frame
5. Stoppers
6. Cover
7. Rota on button
8. Foot pad
9. Height adjustment button
10. Bumper
11. Speed wheel switch
12. Jumping function switch
13. Wheels
14. Decorative lights

ASSEMBLY

USAGE

USER INSTRUCTIONS

Assembly

1. Insert the jumping function part into the bottom frame in the direction indicated by the red arrow. NOTE: There are “L” and “R” letters marked on the jumping function part to install them at the proper side. (left, right).
2. Insert the upper frame into the corresponding holes of the jumping function parts in the direction indicated by the red arrow. Push until you hear a “click” sound.
3. Press the rotation button with both hands at the same time and rotate the upper frame in the direction shown in the picture. When the upper frame is flattened, release both buttons and hear a “click” sound, indicating that the rotation is complete. Then install the cover seat and fasten it.
4. Insert the bumper in the direction shown in the picture and hear a “click” sound to indicate that the installation is in place.
5. Buckle the foot pad and the baby walker is complete.

Usage

1. Hold the bottom frame with one hand and the height adjustment button with the other, adjust to the required position, release the button, and hear a “click”
2. To convert the baby walker into jumper mode, you just rotate clockwise the jumping function switches on both sides of the walker.
3. To convert the baby walker into a pusher mode, you have to press with both hands simultaneously the rotation buttons and rotate the seat until you hear a “click” sound, as the picture shows.
4. With the speed wheel switches you can adjust the speed wheel.
5. Install the bumper in the position shown, in the middle of the walker, then it can be turned into an exercise pedal. The baby can step on it, and the pedal can play music.
6. To remove the bumper you have to push the 2 red buttons as the picture shows and pull it off.
7. To remove the support parts you have to push the height adjustment buttons and pull.
8. To remove the jumping function part you have to hold the red button located under the walker with one hand and pull the part with the other hand.
9. In the picture you can see all the parts that need batteries and you have to use a screwdriver (not included) to open them and the on/off switches for the toys. How to assemble the toy tray:
10. In the picture you see the switch “a” located under the tray and when it is vertical it means it is opened.
11. After you place on the upper side the toy tray, then you have to push up the switch “a” and turn it to fasten the toy. When the switch “a” is horizontal means it is locked and the toy is secured in place.

CARE & MAINTENANCE

• Please check on a regular basis that the latches, connecting elements and seams are properly functional.
• Avoid overloading.
• Cleaning: Clean with a damp sponge or cloth and mild detergent regularly.
• Do not use abrasives or bleach.

LET’S START A NEW JOURNEY TOGETHER!

Thank you for choosing Bebe Stars products

SCAN ME

FOLLOW US

****bebestarsbygilis

@bebe.stars

bebestarsbygilis

ADDRESS
G. Gkilis & SIA OE
2nd Km N. Moudania-Sithonia Str. PO: 63200 N. Moudania Greece
T.: +3023730-23585
www.bebestars.gr

References

• Παιδικά Προϊόντα & Βρεφικά Είδη στη Χαλκιδική - Bebe Stars

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>