Bebe Stars 814 Baby Tricycle User Manual

Bebe Stars 814 Baby Tricycle User Manual

SAFETY WARNINGS

Thank you very much for buying this product, before it’s use, please read the instructions carefully, according to the specifications safe use.

Warning and Notice

• This tricycle is suitable for children from 12-60 months or up to 25kgs.
• Height range: 80-100cm (According to this standard, according to use the growth of children).
• Guardians are responsible for assembling, disassembling or adjusting.
• Handle, footplate and safety belt are the subsidiary appliances for the baby who can’t independently ride. If the child can independently use, be sure to disassemble these subsidiary appliances.
• Dangerous activities are forbidden when use this product and it is easy to fall if the baby stand on the seat or handle behind the footplate.
• Don’t use it on mountain slope or uneven road.
• Don’t use it on heavy traffic road.
• Please keep it in a place which is not rain-drenched and sun-scorched.
• Don’t modify the type of model.
• The handle should be controlled by the guardians.
• The plastic bag contained with parts should be placed beyond the baby’s reach.
• Never leave your child unattended.

WARNING: Never leave the child unatended

PARTS LIST

ASSEMBLY INSTRUCTIONS

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

ASSEMBLY INSTRUCTIONS

1. Assemble the feet (13) to the middle moving part of the frame and fasten with a screw and
2. Insert 3xAA 5V batteries (not included) into the light and screw the cap. Thread the headlight screws into the front scissor (3) and tighten with the nuts.
3. Join the front scissor (3) to the front part of the frame (1) and insert the metal rod with the rod’s head facing Slide the safety ring into the base of the rod.Make sure the tongue is in the center.
4. Thread the plastic fender (6) onto the front scissor, the short side must be facing
5. Clip the brakes into the rear wheel sockets on the The red pedal must be facing up.
6. Insert metal rings into the rear wheel rods (5) and snap them into the frame slots, then snap the plastic fenders (9). Clip the front wheel (4) to the front
7. Clip the handlebar (2) to the top of the scissor and secure with a screw and The red recline button should be on the left side (as the child sits) of the steering wheel.
8. Screw the basket (12) to the back of the frame with a butterfly
9. Insert the seat (7) into the tube located in the center of the frame and screw with the large screw below with a metal ring
10. Clip the footrest (14) to the seat and screw in the short
11. Clip the backrest (8) to the seat and lower the front Pass the belt from the pocket and crotch guard to the front guard.
12. Clip on the small handlebar scissor (red lever facing rear), then clip on the large handlebar piece (handles should be facing forward). Clip the cup holder to the
13. Zip the sunshade to the canopy and clip the canopy to the

Seat Rotation

• Unscrew the tap from both sides of the seat and remove the footrest (fig. 1).
• Pull the safety tab located under the seat (fig. 2) and rotate the seat to backwards position (fig. 3).
• Place back the footrest and screw the taps on the

Seat Recline

• Press the red buttons on both sides of the seat (shown at 4) and pull the backrest back to set it’s reclined position (fig.5).
• Repeat by pushing  the  backrest  to  it’s  upwards   To recline the seat while it is facing backwards, first lean the steering bar forward by pressing the red button on the side and pushing it to the front.

Pedal function

• Turn the red clutch on the front wheel to allow the pedals to move free without giving movement to the
• Turn the clutch back to lock the pedals with the wheel and allow the child to move the

Brake function

• To engage the brakes, step on the red pedals on the rear
• To disengage the brakes, pull the pedals up and the wheels will be free to

Lights and sounds functions

• The tricycle is equipped with a multicolored LED
• The same headlight functions as a horn with
• To power the headlight, three AA batteries are needed (not included).
• Press the buttons to activate the lights and

 CARE & MAINTENANCE

To avoid your child being hurt, you should often check and maintain the tricycle.

• Please clean the tricycle directly, using dry cloth to wipe
• Regularly check whether there are screws loosed or parts damaged, if necessary please replace the damaged
• Please dismantle carefully according to the operating instruction, so as to avoid unnecessary
• Avoid overload
• For transmission parts such as shaft and handlebar shaft, is necessary to add silicone spray to improve the service life of the

Read More About This Manual & Download PDF:

References

• Παιδικά Προϊόντα & Βρεφικά Είδη στη Χαλκιδική - Bebe Stars

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>