Bebe Stars 4222 Baby Walker User Manual

Bebe Stars 4222 Baby Walker User Manual

Your child’s safety depends on you. Proper product’s use cannot be assured unless you follow these instructions.
DO NOT USE THIS PRODUCT BEFORE YOU READ AND UNDERSTAND THESE INSTRUCTIONS

PARTS LIST

A. Arms (x2)
B. Wheels (x2)
C. Back
D. Seat
E. Screws (x2)
F. Slots F
G. Slots G
H. Frame

ASSEMBLY INSTRUCTIONS

INSTRUCTIONS FOR USE

SAFETY INSTRUCTIONS

Read the instructions carefully before use and save for future reference. The child may be injured if you do not follow these instructions.

• It is intended for children aged about 6 months and up who can sit on their own without assistance. Not intended for children who can walk or weigh more than 12kg.
• Do not place any load on the walker that could affect stability. The maximum load of the walker is 12kg.
• Warning: Avoid access to stairs, steps and non-flat surfaces.
• Warning: The child may move quickly and move away when using the walker.
• Avoid access to fireplaces, heaters and cookers.
• Avoid access to hot liquids, electrical cables and other potential hazards.
• Prevent collisions with glass doors, glass balcony doors and furniture.
• Do not move the walker while the baby is inside.
• Do not use the walker if any of its parts are broken or missing.
• Keep the plastic cover away from the baby, there is a risk of suffocation, etc.
• The walker should only be used for a short time (eg 20 ‘).
• When using a walker, the child should step on both feet.
• Adjust the height of the position appropriately to prevent falls or injuries.
• Do not use spare parts that are not approved by the manufacturer or distributor.
• Small pieces should only be assembled by adults.

ASSEMBLY INSTRUCTIONS

Pusher mode

1. Plug the wheels (B) onto the (G) slots.
2. Attach the arms (A) onto the (F) slots and tighten with (E) screws.

Trike mode

1. Plug the wheels (B) onto the (G) slots.
2. Attach the backrest (C) on the seat (D) and attach the seat to the arms (A).
3. Attach the arms (A) onto the slots located behind the main head and tighten with (E) screws.

Scooter mode

1. Plug the wheels (B) onto the (G) slots.
2. Attach the arms (A) onto the slots located behind the main head and tighten with (E) screws.
3. Tighten the screw located behind the rear wheels (a).

INSTRUCTIONS FOR USE

A. Speed adjustment
Use the knob located on the back of the rear wheels to adjust the speed of the toy.

B.

1. Music buttons
2. Pull the 2 triggers together to unlock the handlebar and fix it in your desired position.
3. Lights button
4. Batteries compartment

CARE & MAINTENANCE

• Please check on a regular basis that the latches, connecting elements, belt systems and seams are properly functional.
• Care for, clean and check this product regularly.
• Clean with a damp sponge or cloth and mild detergent.
• Do not use abrasives or bleach.

BATTERY INFORMATION

CAUTION
Non-rechargeable batteries must not be recharged.
Rechargeable batteries must be removed from the toy before being charged.
Rechargeable batteries are only to be charged under adult supervision.
Different type of batteries or new and used batteries must not be mixed.
Only batteries of the same type as recommended are to be used, alcaline AA 1.SV.
Batteries must be inserted with the correct polarity.
Exhausted batteries must be removed from the toy.
Toy tray should be put onto the top tray when the baby stays in the walker.
Batteries should be removed if the product is not going to be used in a short while.
Batteries not included.

Thank you for choosing Bebe Stars products

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>