Bebe Stars i-SIZE NOBILE 360 Degree Vanilla Ice Car Seat User Manual

: June 11, 2024
: Bebe Stars

Table of Contents

Bebe Stars i-SIZE NOBILE 360 Degree Vanilla Ice Car Seat
Product Usage Instructions
Frequently Asked Questions
SAFETY WARNINGS
PARTS LIST
USER INSTRUCTIONS
CARE & MAINTENANCE
Documents / Resources

Bebe Stars i-SIZE NOBILE 360 Degree Vanilla Ice Car Seat

Bebe-Stars-i-SIZE-NOBILE-360-Degree-Vanilla-Ice-Car-Seat-
product

Specifications

Brand: Bebe Stars
Model: i-SIZE
Age Range: 40-150cm
EU Standards: ECE R129/03
Item Number: 924

Product Usage Instructions

Safety Warnings

Thank you for purchasing the Bebe Stars car seat.

Safety is our top priority, please follow these guidelines:

Never leave your child unattended while using the car seat.
Ensure the child’s height is within the range of 40-150cm.
Comply with EU Standards ECE R129/03 for proper usage.

Parts List

```
1. Headrest
```
Headrest pillow
Shoulder strap guide hook

User Instructions

Install the car seat in the recommended position in the vehicle.

Rotation

Rotate the car seat as needed to adjust for different situations.

Recline

You can adjust the recline of the car seat for comfort and safety.

Adjust the Shoulder Straps

Properly adjust the shoulder straps to ensure a secure fit for your child.

Adjust the Headrest

The headrest can be adjusted to accommodate your child’s height and comfort.

Remove the Fabric Cover

If needed, you can remove the fabric cover for cleaning or maintenance purposes.

Frequently Asked Questions

Q: Can this car seat be used for newborns?

A: The recommended age range for this car seat is 40-150cm, so it may not be suitable for newborns. Always check the manufacturer’s guidelines.

Q: Is this car seat compatible with all vehicles?

A: While the car seat meets EU standards, compatibility with specific vehicles may vary. It’s recommended to test the fit in your vehicle before regular use.

DO NOT USE THIS PRODUCT BEFORE YOU READ AND UNDERSTAND THESE INSTRUCTIONS

SAFETY WARNINGS

Thank you for purchasing this car seat by Bebe Stars. We will always give you the best products and services!
Please read this instructions manual carefully before you use it and keep it for future reference!
Failure to follow the instructions contained in this manual could result in serious injury to your child!
This i-size car seat is suitable for children with a height of 40-150 cm.
This car seat complies with ECE R 129/03 European standards.
NEVER leave your child una ended in a car even for a short me.
DO NOT modify or empty to modify the child safety seat in any way.
DO NOT take apart or attempt to take apart this child’s safety seat etc.
DO NOT use a child safety seat with damaged or missing parts.
DO NOT change the cover or harness, they are important components.
DO NOT use a child safety seat that has been in a crash. A crash can cause damage to the car seat that you can not see. You should replace it.
DO NOT use a second-hand car seat, because you don’t know the history of it. It has likely been in an accident or some parts are missing/damaged.
Make sure the vehicle belt is fully secured and the car seat is correctly installed each me you use it.
Car interiors can become very hot when in direct sunlight, it is recommended that you should cover the car seat when not in use. This prevents some components become hot and burn the child.
Make sure that all luggage and objects likely to cause injury in the event of an accident are properly secured. Do not put any sharp or hard items around the seat.
If you experience a problem with this product or require assistance, please contact our local sales agent or our customer service department.
Ensuring that any lap straps are worn low down so that the pelvis is ﬁrmly engaged, shall be stressed.
ALWAYS fasten your child with the harness system. The child restraint must not be used without the cover.
Before you adjust any movable or adjustable parts of your child seat, you must remove your baby from the child seat.
NEVER hold a baby on your lap in a vehicle.
WARNING Never leave your child unattended!

PARTS LIST

Bebe-Stars-i-SIZE-NOBILE-360-Degree-Vanilla-Ice-Car-Seat-
fig-1

Headrest
Headrest pillow
Shoulder strap guide hook
Shoulder pad
Shoulder strap
5-point buckle
Harness adjust button
Buckle pad
Cushion
5-point harness strap
Recline adjust handle
Rotation adjust handle
Waist cushion
Headrest adjust handle
Lap belt guide
Isofix
Isofix lock button
Isofix release button
Support leg adjust button
Support leg
Isofix guide sleeve
Fabric cover
Lap belt hook
Reversible cover plate

USER INSTRUCTIONS

Instructions for use
- Install position in the vehicle
- WARNING Improper installation will cause serious injury For the safety of your child, please check:
- Rotation ****
- Recline ****
- Adjust the shoulder straps
- Adjust the headrest ****
- Remove the fabric cover ****
- Install the fabric cover and cushion
- Install the buckle
- Remove Isofix
Installation Instructions
- REARWARD FACING: 40-105cm ISOFIX + SUPPORT LEG + 5-POINT HARNESS
- FORWARD FACING: 100-150cm
- METHOD 1: ISOFIX + 3-POINT VEHICLE BELT
- METHOD 2: 3-POINT VEHICLE BELT
Hide the 5-point Harness

Install position in the vehicle

It can be installed on the seat with both shoulder and lap belts.
It cannot be installed on the passenger seat with an airbag in the front row. Never use this child restraint system in seating positions where an active frontal airbag is installed.
An active frontal airbag may cause serious injury to your child in an accident.
Do not use with 2-point vehicle belt. It can be used if the vehicle is equipped with a 3-point belt.

Rotation

Pull the adjust handle 12, and rotate the seat to a rearward or forward position, until you hear an audible sound “click”. Make sure that the seat is locked correctly.

Recline

Pull the recline adjust handle 11, and adjust the seat to the correct position.

Adjust the shoulder straps

Loosen the shoulder straps: press the harness to adjust button 7, and at the same time pull the 2 shoulder straps out to the convenient length. Do not only pull out one of the shoulder straps.
Tighten the shoulder straps: grasp the 5-point harness strap 10, and pull it forward slowly, until the tightness is comfortable to your child.

Adjust the headrest

Press the head to adjust to handle 14, pull up and adjust. Please release the shoulder strap 4 before pulling up the headrest if it is installed with a 5-point buckle. Make sure that the shoulder straps fit properly over the shoulders of the child.

Remove the fabric cover

Press the harness adjust button 7, and at the same time pull the 2 shoulder straps 5 ut to the convenient length.
Open the shoulder pad 4, and take it off from slip A.
Take off the buckle pad 8.
Press the red button to release the buckle 6.
Take off the cushion 9.
Pull the headrest to the top position, and take off the headrest cover and shoulder pads. Take off the cover.

Install the fabric cover and cushion

Install the cover on the main seat.
Pull the headrest to the top position, and install the headrest cover on it.
Put in the cushion 9 on the seat as shown in the figure.
Tip: Using cushion 9 and head pillow 2 will make your child safer and more comfortable, we recommend you use them for children 40-75 cm.

Install the buckle

Slide buckle tongues together and then insert them in the buckle 6, until hear an audible sound of “click”.
Put into the buckle pad 8.
Connect shoulder pad 4 to slip A, then install the shoulder pad.

Remove Isofix

Press the Isofix secondary lock button 17 and the Isofix release button 18, until it is released. Then take back the Isofix to the seat.

INSTALLATION INSTRUCTIONS

REARWARD FACING: 40-105 CM
ISOFIX + SUPPORT LEG + 5-POINT HARNESS
Open the support leg: Turn the supporting leg 90o from the base and pull it outward. When you hear the “click” sound, it indicates that the head release of the supporting leg A is in the correct position.
NOTICE: When the support leg is pulled into the correct position, the whole green bar can be seen in front.
Install the ISOFIX: Please use our Isofix guide sleeves equipped with the Isofix anchorages on the vehicle seat if your car is not equipped with Isofix guide 21.
Press the Isofix secondary lock button 17 and the Isofix release button 18, then push the Isofix 16 forward as far as possible.
Push the Isofix 16 into the anchorages until hear an audible sound “Click” (a green mark will turn up on the button, make sure that is seamless between the seat body and the vehicle seat.)
Grasp the seat body to check the seat if it is fastened tightly or shakes.
NOTICE: Only if green marks turn up on both sides of Isofix 16, it is installed correctly!
If the seat shakes and the Isofix are pulled out, please repeat the above steps and install it again.
Open the support leg: Press the support leg to adjust button 19 to adjust the height. A green mark will turn up when the support leg reaches the ground.
Fix the child: Pull the recline adjust handle 11, and adjust the seat to the correct position.
NOTICE: The seat can only be fixed on position 5 when installed on rearward facing.
Pull the rotation adjust handle 12, and rotate the seat 90o to one side.
press the harness adjust button 7, and pull the 2 shoulder straps toward the front of the seat (do not pull only one shoulder strap, 2 of them should be pulled together). Open the buckle 6.
Pull the child into the seat, the child’s legs on both sides of the buckle pad 8.
Press the head to adjust to handle 14, and pull up and down to the correct height.
NOTICE: Make sure that the shoulder straps fit properly over the shoulders of the child.
Pass the shoulder straps and pads through the child’s shoulders on both sides, then insert the buckle 6, until hear an audible sound of “click”.
Grasp the 5-point harness strap 10, and pull it forward slowly, until tightness is comfortable to your child make sure it is not crossed or twisted).
NOTICE: When there are 2 adult fingers space between the shoulder pad and the child, that is, the tightness of the shoulder strap is the most suitable at the time.
FORWARD FACING: 100-150 CM
METHOD 1: ISOFIX + 3-POINT VEHICLE BELT
METHOD 2: 3-POINT VEHICLE BELT
Method 1: Install Isofix as mentioned before in 2.1.
Method 1 + 2: Storage the support leg: Press the support leg and adjust button 19 to adjust the shortest. Fold the support leg less than 45o and pull the support leg A back to the base, when you hear the “click” sound, it indicates that is correct. Fold the supporting leg, until it is fully storage to the base.
Install the seat: Put the seat on the vehicle seat.
Press the head to adjust to handle 14, and pull up and down to the correct height.
Pass the car seat belt through the shoulder belt guide hook 3, around the child’s hips.
Pass the car seat belt through the lap belt guide groove 15, around the child’s hips. Pass the car seat belt through the lap belt guide groove 15 on the other side and lock the vehicle belt buckle.
Make sure the lap belt is passed through the lap belt hook 23. (The seat must be as close as possible to the vehicle seat.)

HIDE THE 5-POINT HARNESS

First, remove the cushion 9. It should be removed when the child is 100-150 cm tall. Remove the buckle pad 8 and shoulder pads 4 (take them off from slip A).
Press the harness to adjust button 7, and at the same time pull the 2 shoulder straps out to the convenient length.
Unbuckle the 5-point buckle, pull the headrest 1 to the highest, take out cushion 9, head pillow 2 and waist cushion 13.
Open the buckle and insert it into the cloth cover 6.
Open the cloth cover.
Open the reversible cover plate 24, pick the belly hook 23 out, then take the 5-point buckle 6 and harness into the box.
Attach the belly strap hook 23 to the belt hook.
The car seat is ready to use.

CARE & MAINTENANCE

Clean plastic parts with a wet cloth and mild soap, do not use harsh detergents or bleach.
Cleaning the cloth cover: it is detachable and washable at water temperature below 30 with mild soap and can only be dried in the air. Do not use detergent, solvent or very strong soap.
Clean the harness with a wet towel and it is strictly forbidden to use detergent.
The shoulder pad and crotch pad should be hand washed with water temperature below 40 and laid flat to dry.
Do not dry clean or tumble dry and keep away from strong light.
Thank you for choosing Bebe Stars products

SCAN ME

FOLLOW US

bebestarsbygilis
@bebe.stars
bebestarsbygilis

ADDRESS

G. Gkilis & SIA OE
2nd Km N. Moudania-Sithonia Str.
PO: 63200 N. Moudania Greece
T.: +3023730-23585
www.bebestars.gr

Documents / Resources

| Bebe Stars i-SIZE NOBILE 360 Degree Vanilla Ice Car Seat [pdf] User Manual
i-SIZE NOBILE 360 Degree Vanilla Ice Car Seat, i-SIZE, NOBILE 360 Degree Vanilla Ice Car Seat, Degree Vanilla Ice Car Seat, Vanilla Ice Car Seat, Ice Car Seat, Car Seat, Seat
---|---