Hertz CS 300 S2 CBA 250 Active Subwoofer Owner’s Manual
- June 9, 2024
- HERTZ
Table of Contents
Hertz CS 300 S2 CBA 250 Active Subwoofer
Product Information
Subwoofer
The Subwoofer is a product offered by Hertz. It is available in multiple languages and comes with an owner’s manual. The product is designed to provide high-quality audio output for music enthusiasts.
Product Usage Instructions
- Before using the subwoofer, ensure that it is properly installed in the vehicle or audio system.
- Turn off the subwoofer when not in use.
- Do not operate the subwoofer in a manner that may cause damage to the product or other components of the audio system.
- Follow the instructions in the owner’s manual when connecting the subwoofer to other audio components.
- Adjust the volume and other settings on the subwoofer to ensure optimal audio performance.
- Protect the subwoofer from exposure to moisture, extreme temperatures, and physical damage.
- Use only high-quality cables, connectors, and accessories when installing and operating the subwoofer.
- Refer to the Hertz website for warranty information and other product support.
Note: When routing cables, make sure that the cable does not come in
contact with sharp edges or near-moving mechanical devices.
Make sure that it is firmly attached and protected along its entire length and
its insulation is self-extinguishing. Only use cables with the proper section
(AWG) indicated herein. When running the cable through a hole in the vehicle’s
chassis, protect the cable with a rubber ring (grommet). Be sure to provide
proper protection for cables running close to heat-generating devices. Do not
run the wires outside of the vehicle.
Help us in our charitable endeavors:
Alpatronix donates $1 to charity for every review you leave for our products.
We don’t care if it’s positive or negative, we just think every business needs
to do some good in the world. Help us make the world a better place AND help
us and your fellow customers by giving us your valuable feedback.
Thank you for being a contributing citizen of this world.
Technical Specifications
-
Input:
DC 5\/- 1.5A (Lightning USB)
DC – 1.2A (Qi Wireless) -
Output: 5.OV +/- 0.25V – 1.5A
-
Battery Capacity: 5000 mAh(19Wh)
-
Compatibility: iPhone 11 Pro Max
-
Battery Type: Lithium Polymer
-
Dimensions:
- 6.5 x 3.2 x 0.62 in
- 164 x 82 x 15.8 mm
-
Weight: 4.6 oz (1 30 g)
LED Reference Guide
Features
- Fully charges the iPhone within 2 hours.
- Precise design for easy access to all iPhone functions without removing it from battery case.
- Charge and sync directly through the case.
- Strong & durable construction protects your iPhone against bumps, dents & scratches.
- Protective IC circuit efficiently avoids short-circuiting, over-charging, and malfunctions, even under extreme conditions.
Illustration
Installation
- Gently bend the soft top backwards, then slide your phone into the case as shown in image #1 below.
- Slide the phone in all the way, making sure it is securely seated over the lightning charging port, then pull the soft part back over your phone to secure it in place.
- Removing: Peel back the soft top, then use your thumbs,or the palm of your hand to push the screen upward to SLIDE the phone off the case.
ATTENTION!
When installing or removing your phone, DO NOT REMOVE THE PHONE AT AN ANGLE,as
shown in this diagram. This will damage the lightning port permanently. SLIDE
your phone out as shown in diagram 1 and 4 (below), and parallel to the case.
Note: Whether charging through the battery case or by the Lightning USB cable, you will notice the charging signal appears on your iPhone screen’s battery indicator. When charging is finished, the signal will disappear. Only use your iPhone’s original Lightning USB cable to charge and sync your battery case with a wall charger, or with a laptop/desktop. Avoid using aftermarket and non-standard cables as they can cause damage to the battery case, your phone, and/or cause overheating or fire.
Charging your Battery Case & iPhone together by cable
- Connect your batttery case (iPhone already installed) to your iPhone cable (not included).
- Connect the USB power cable to any USB power source such as a computer to start charging. The battery case is programmed to let your iPhone charge first, then the battery case will charge.
- Charge until the LED indicators indicate fully charged (all 4 LEDs are solid).
Charging your iPhone using the Battery Case
- Press and hold the power button for about 3 seconds to turn on the battery case and start charging your iPhone.
- Press and hold the power button for 3 seconds again to deactivate the battery case and stop charging. This can significantly save more battery power to charge the iPhone next time.
Charging your Battery Case & iPhone together wirelessly
Because your shiny new iPhone comes with wireless charging, we thought it’s only fitting that the case we fesign for it has the same capability. It’s simple to use.
- Place your battery case (iPhone already installed) on a Qi wireless charging pad (not included). The battery case is programmed to let your iPhone charge first, then the battery case will charge.
- Align the wireless charging logo on your battery case with the charging logo on your wireless charging pad.
Note:
-
For best results, use the Alpatronix Qi wireless charger.
However, this product should work with any Qi-Certified wireless charging pad.
You can purchase a wireless charging pad from any of the below locations: -
Search Amazon.com for “Alpatronix CXI 01, CXI 02, or CX200”
-
Search Alpatronix.com for “Alpatronix CXI 01, CXI 02, or CX200”
-
If the wireless charging logo on the case and charging pad are not aligned properly, it is possible that the charging speed will be lower than optimum, or that there is no charging at all. If you experience problems with wireless charging, simply re-align the case and the charging pad. If the problem continues, contact Alpatronix for troubleshooting.
LED Indicators
Package Contents
- Battery Case
- Screen Protector
- Extended Warranty Card
- Customer Service Information
- User Manual
Warning
- Read all instructions and warnings prior to using this product. Alpatronix is not responsible for improper use Of this product. Improper use may result in product damage, excess heat, toxic fumes, fire, or explosion, which may cause you harm.
- Only use your iPhone’s original cable to charge this battery case. Using aftermarket and non-standard cables can damage the BXI IPro Max, your phone, and may result in overheating and/or fire.
- Do not store battery case in high temperatures, including intense sunlight and/or heat. Do not expose to moisture or water.
- Always take used batteries to the nearest hazardous waste collection center in your area.
- Do not place battery case in fire or other excessively hot environments.
- Not a shockproof product. Be cautious of excessive drops, bumps, abrasions, or other impacts to this battery case. Discontinue use if dents, tears, punctures, deformities, or corrosions are visible. Contact Alpatronix or dispose at the nearest hazardous waste facility.
- Do not disassemble this battery case, expose to moisture, or submerge it in liquid. Keep the battery dry at all times.
- Do not attempt to charge the battery using any method, apparatus, or connection other than the device’s USB connector or a Qi-certified charging pad.
- Do not attempt to replace any part of this battery.
- If the battery case is intended to be used by a minor, purchasing adult agrees to provide detailed instructions and warnings to any minor prior to use. Failure to do so is the sole responsibility of the purchaser. Purchaser agrees to indemnify and hold harmless Alpatronix for any unintended use/misuse.
- All battery cases have gone through a thorough quality assurance inspection. If you find that your battery is excessively hot, emitting odors, deformed, abraded, cut, or is behaving abnormally, immediately stop use and contact Alpatronix by email at support@alpatronix.com or by phone at (888) 407 – 7515.
- If you intend to store or not use the battery case for more than 3 months, charge your battery case for at least 1 hour prior to storing it.
- Never dispose of battery case in the garbage. Disposal of batteries in the garbage is unlawful under state and federal laws and regulations. Always dispose of your batteries and battery-containing products at the nearest hazardous waste collection facility or a battery recycling center.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>