LIAN LI Q58 Tempered Glass Mini Tower Computer Case User Manual

LIAN LI Q58 Tempered Glass Mini Tower Computer Case

Product Information

Mode SFX PSU Mode Specifications

• A Power switch
• B I/O ports: USB 3.0 x 1, Microphone Combo Jack, USB 3.1 x 1(Type-C)
• C SFX/SFX-L power supply bracket
• D Power extension cord
• E Supporting 120 mm fan x 2 or 140 mm fan x 2 or 240 mm radiator x 1 or 280 mm radiator x 1
• F Tool less hot-swap 2.5 SSD tray
• G LED / fan hub
• H PCIE extension cable
• I Bottom fan bracket (2.5 SSD x 1 or 120 mm fan x1)

Mode ATX PSU Mode Specifications

• A Power switch
• B I/O ports: USB 3.0 x 1, Microphone Combo Jack, USB 3.1 x 1(Type-C)
• C Supporting ATX PSU max.160 mm,120 mm fan x 1 or 140 mm fan x 1 or 120 mm AIO radiator x 1
• D Power extension cord
• E Tool less hot-swap 2.5 SSD tray
• F LED / fan hub
• G PCIE extension cable
• H Bottom fan bracket (2.5 SSD x 1 or 120 mm fan x1)

Product Usage Instructions

SFX PSU Installation

1. Install the PSU on the PSU bracket.
2. Plug in the power cord.
3. Fix the GPU cable first.
4. Install back the PSU bracket with the SFX PSU, and fix the screws.
5. Pass the GPU cable behind the PSU bracket.

Remove the motherboard PSU bracket screws

Remove the power supply bracket

Plug in the power cord

First the GPU cable first

Install back the PSU bracket with the SFX PSU, and fix the screws

2.5SSD Installation

1. An additional 2.5 SSD can be installed here.
2. Install back the PSU bracket with the SFX PSU, and fix the screws.
3. Pass the GPU cable behind the PSU bracket.

Motherboard Installation

Note: Plug the PCIE cable to the motherboard.

Remove the Top Fan Bracket

Top Fan Bracket 240 mm AIO Installation

120 mm fan and water cooling can be installed to adjust the air inlet position to your preference. Install with water-cooled screws. The tube shall be at the front, and let the water pump pass through first.

120 mm fan and water cooling can be installed to adjust the air inlet position to your preference 120 mm

Hardware List

Exceeded quantity are spare parts .

I/O Ports Function

Appearance Style

Standard style

Top mesh / bottom glass style

Show the motherboard side

Show the GPU side

Remove Top Panel & Side Panels & Bottom fan bracket

WARNING : Lift up and remove top panel first before removing the glass panels

Remove the 3 screws at the back and lift it up (To lift the top cover, you only need to remove the middle screw)

Open the side panel and pull back to remove, and remove the front panel to the front
Note: The side panel is a symmetrical structure and can be swapped to the preferred position.

Remove the 1 thumb screw, get out of the slot, and pull out in the direction of the arrow
Note: After disassembling the chassis, refer to page 6 for A mode installation and page 14 for B mode installation

Top Fan Bracket 280 mm AIO Installation

Note: The tube shall be at the front and the fan must be installed above the radiator.

Top fan bracket expansion rack for storage installation

LED / Fan Hub Description

Toolless Hot-Swap 2.5″ SSD Installation

Installation of bottom fan bracket Accessories
2.5″ SSD x 1 or 120 mm fan x1

Magnetic dust filter installation

ATX PSU Installation

Cooling Installation

Supporting 120 mm fan x 1 or 140 mm fan x 1 or 120 mm AIO radiator x 1

• Supports radiator length: within 155 mm

Install ATX PSU Bracket **

**

Pass the tube inside go out first

Motherboard installation
Note: Plug the PCIE cable into the motherboard.

Magnetic dust filter installation

Tool less Hot-Swap 2.5″ SSD Installation

Installation of bottom fan bracket Accessories

Hardware Clearance

S FX / SFX-L PSU standard position

SFX / SFX-L PSU screw holes position

Clearance of ATX PSU: 160mm

Clearance of graphic cards

Clearance of CPU cooler

Clearance of 240mm AIO

Instructions for System of PCIe 4.0 using PCIe 3.0 riser cable

For users buy the model of PCIe 3.0 version (Q58X3/ Q58W3), but using PCIe 4.0 ready motherboard, CPU and GPU, please go to motherboard BIOS to set the PCIe status from Auto Mode or Gen 4 Mode to Gen 3 Mode to operate precisely.

1. Install the motherboard, CPU and GPU first, and then boot the system and enter motherboard BIOS.
2. Use the BIOS performance mode to set up: Set the signal of the PCIe Slot support from Auto Mode or Gen 4 Mode to Gen 3 Mode. Scan below QR code refer to each brand motherboard setting.
3. Save the setting and power off the PC.
4. Remove the GPU.
5. Plug the PCIe 3.0 riser cable to the motherboard & GPU.
6. Reboot system and install operating system.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>