LAS 10300 Tensioning Strap Set with Ratchet and Hook Instruction Manual
- July 30, 2024
- LAS
Table of Contents
LAS 10300 Tensioning Strap Set with Ratchet and Hook
WARNING
Please read the operating instructions carefully prior to use and observe all
safety instructions! Not observing such may lead to personal injury, damage to
the device or to your property! Store the original packaging, the receipt and
these instructions so that they may be consulted at a later date!
When passing on the product, please include these operating instructions as
well.
Please check the contents of package for integrity and completeness prior to
use!
PROPER USE OF THE PRODUCT
The tensioning straps are designed for the securing and lashing of objects inside vehicles or on the bed. Only to be used to tie down or lash, never use to lift loads! Observe the lashing specific cations on the strap!
This device is not designed to be used by children or persons with limited
mental abilities or without experience and/or lack of required specialist
knowledge. Keep children away from the device.
Utilisation according to the intended purpose also includes the observance of
all information in these operating instructions, particularly the observance
of the safety instructions. Any other utilisation is considered to be contrary
to the intended purpose and may lead to material damage or personal injuries.
EAL GmbH assumes no liability for damage resulting from improper use.
SCOPE OF DELIVERY
| 1 x Tensioning strap | 1 x Operating instructions |
|---|
SPECIFICATIONS
| Lashing force, LC: | 250 daN |
|---|---|
| Manual tensioning force, SHF: | 25 daN |
| Pre-tensioning force, STF: | 90 daN |
| Length: | LGF: 0,3 m, LGL: 4,7 m |
| Width | 25 mm |
| Material | PES |
SAFETY PRECAUTIONS
- The warning triangle indicates all instructions which are important for safety. Always follow these otherwise you could injure yourself or damage the device.
- Children may not play with the device.
- Cleaning and user maintenance may not be carried out by children without supervision.
- Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
- Only use this product for its designated purpose!
- Do not manipulate or disassemble the device!
- For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
MONITORING
- Before using, check the tensioning strap for potential damages. In the event of damage to the strap or the metal parts, immediately cease to use the tensioning strap.
- Lashing straps contaminated with aggressive or other substances must be examined carefully and checked as required. The use of such can be dangerous.
- The lashing straps and components are to be checked at least once a year by a specialist. Depending on the conditions of use, an additional check may be required.
WITHDRAWAL FROM USE
the tensioning strap may no longer be used in the event of:
- Thread breaks and cuts, especially when caused by sharp edges
- Missing or no longer legible labelling
- Damage to the connection
- Damage or deformation due to the effects of heat
- Damages caused by aggressive substances
The connecting and tensioning elements may no longer be used in the event of:
- Cracks, breaks or signs of considerable corrosion
- Opening > 0.05 – x in hook mouth or other deformations
- Visible, lasting deformation on carrying parts
OPERATING INSTRUCTIONS
If these instructions are not observed, the result may be personal injury, damages to the vehicle or the load. Never load the strap in excess of the permitted lashing force specified on the label.
- Before using, select the tensioning strap according to the intended method of lashing, the required lashing force, the surface of the load and check this (see labelling sticker). When tie-down lashing, it is recommended to ensure that the necessary pre-tensioning forces can be applied in a controlled manner.
- Make sure that the vehicle parts that the load is secured to are suitable for the job and oer sucient stability.
- Remember that additional acceleration and lateral forces will be generated by the wind.
- Tensioning straps may not be knotted.
- Caution – When the road curves, or the vehicle brakes, the straps may yield. (Carry out brake testing) Protect objects with large surfaces from wind loads.
- These straps are not suitable for lifting and carrying loads.
- Permitted lashing force: 250 daN.
- Do not tension the strap over sharp corners or edges.
- Lashing straps may not be twisted and the full width must make contact.
- No loads may be placed on top of the tensioning strap.
- The strap may not be positioned up against a hot surface.
- The tensioning strap may only be used between temperatures of -40°C and +120°C.
- Always use 2 straps, either crossed over or in parallel.
- The tip of the lashing hook may not be loaded unless it is a specialist hook designed specically for this use.
- In order to prevent a lashing hook from becoming loose and unsecured in a lashing point on the load area, it should be placed from the inside out.
- When using polyamide or polyester tensioning straps, contaminations may be removed using ordinary solvents. The tensioning strap must be allowed to dry fully. When using ordinary solvents, the applicable regulations are to be observed (e.g. data sheet for chlorinated hydrocarbon ZH 1/194)
Tensioning straps with ratchet
Never position the hook and manual ratchet at an edge.
- Never lengthen the tensioning lever of the manual ratchet in order to achieve greater forces when this is not expressly permitted.
- In order to ensure it is securely positioned, 1.5 turns of the strap should be applied to the ratchet. Pre-tension the strap by hand so that not more than 3 turns of the strap must be applied to the manual ratchet in order to lash the load.
Fixture
Wrap the strap carefully around the transportation load and guide the loose
end of the strap through the slot (1).
The strap is tensioned by moving the ratchet handle (3) back and forth. (See
Figures A, B and C)
The transportation load is secured by bring the ratchet handle (3) to the home
position, Figure A.
To open the strap, the ratchet locking mechanism (2) us pulled up and the
ratchet handle (3) is pushed forwards (Figure D). Now pull the strap out of
the slot (1).
STORAGE AND MAINTENANCE
STORAGE
- Only store the straps in dry, lightly heated spaces.
- Protect from major sunlight.
- Do not dry or store the strap in the vicinity of fire, radiators, heating pipes or other locations with extreme temperatures.
- Never store with chemicals.
MAINTENANCE
Maintenance work may only be carried out by the manufacturer or persons named by the manufacturer.
NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of the tensioning straps via the recycling bin or the
public/municipal collection points.
The materials are recyclable. You make an important contribution to protecting
our environment by recycling, material utilisation or other forms of reusing
waste equipment!
CUSTOMER SUPPORT
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
