LAS 10113 LED Contour Light Large Instruction Manual
- June 27, 2024
- LAS
Table of Contents
LAS 10113 LED Contour Light Large
WARNING
Read the operating instructions carefully before initial use and observe all
of the safety notes! Not observing such may lead to personal injury, and
damages to the device or your property! Store the original packaging, the
receipt, and these instructions so that they may be consulted at a later date!
When passing on the product, please include these operating instructions aas
well Please check the contents of the package for integrity and completeness
before use!
PROPER USE OF THE PRODUCT
Contour lights are lamps that indicate the width all of a vehicle. They are intended to supplement the marker and tail lights on certain vehicles and to draw attention to particular vehicle outlines.Observe § 51b StVZO! Federal German traffic safety regulations. Utilization according to the intended purpose also includes the observance of all information in these operating instructions, particularly the observance of the safety instructions. Any other utilization is considered to be contrary to the intended purpose and may lead to material damages or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.
- The contour light must be replaced if 2 or more of the 4 LEDs have failed on one side.
SCOPE OF DELIVERY
- 1 x Contour light
- 2 x Phillips screw M5 x 20
- 2 x Nut M5
- 2 x Washer
- 1 x Quick reference guide
SPECIFICATIONS
SAFETY NOTES
- The warning triangle labels all instructions important to safety. Always follow these otherwise you could injure yourself or damage the device.
- Children may not play with the device.
- Cleaning and user maintenance may not be carried out by children without supervision.
- Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
- Only use this product as intended!
- Do not manipulate or dismantle the device!
- For your own safety, only use accessories and spare parts that are stated in these Instructions or are recommended by the manufacturer!
MAINTENANCE AND CARE
The contour light is maintenance-free when used as intended. Only clean the contour light with a dry, soft cloth. Do not use any abrasive cleaners or cleaners containing solvents. Never allow liquids to penetrate the inside of the light.
NOTES REGARDING ENVIRONMENTAL PROTECTION
Do not dispose of electrical devices with household waste! Electrical and electronic scrap must be collected separately and disposed of in an environmentally responsible manner for recycling. Please contact your community or city administration regarding disposal options for electrical and electronic scrap.
CONTACT INFORMATION
EAL GmbH
- Otto-Hausmann-Ring 107
- 42115 Wuppertal, Germany
- +49 (0)202 42 92 83 0
- +49 (0) 202 42 92 83 – 160
- info@eal-vertrieb.com
- www.eal-vertrieb.com