LAS 10334 Tensioning Strap with Ratchet Instruction Manual

: May 15, 2024
: LAS

Table of Contents

LAS 10334 Tensioning Strap with Ratchet
Product Usage Instructions
FAQ
PROPER USE OF THE PRODUCT
SCOPE OF DELIVERY
SPECIFICATIONS
SAFETY PRECAUTIONS
INFORMATION ON THE USE AND MAINTENANCE OF LASHING STRAPS
OPERATING INSTRUCTIONS
STORAGE AND MAINTENANCE
NOTES REGARDING ENVIRONMENTAL PROTECTION
CONTACT INFORMATION EAL GmbH
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LAS 10334 Tensioning Strap with Ratchet

LAS-10334-Tensioning-Strap-with-Ratchet-PRODUCT

Specifications

Typ: QL0302
Zurrkraft, LC: 500 daN
Handspannkraft, SHF: 50 daN
Vorspannkraft, STF: 100 daN
Length: 6.00 m
Width: 38 mm
Dehnung: < 7 %
Material: PES

Product Usage Instructions

Proper Use of the Product

The ratchet strap is designed for securing and lashing objects inside vehicles. It should only be used to tie down or lash objects and should never be used to lift loads. Always adhere to the lashing specifications on the strap and follow regulations for securing loads in road traffic.
The ratchet strap is not suitable for use by children, persons with limited mental abilities, or individuals lacking experience or specialist knowledge. Keep the device away from children and do not use it for commercial purposes.
Utilize the product according to its intended purpose and follow all safety instructions provided in the operating manual. Any other usage may result in material damage or personal injury for which EAL GmbH does not assume liability.

Scope of Delivery

The package includes 1 x 2-piece tensioning strap with ratchet and J-hook and 1 x Operating instructions.

Operating Instructions

Read the operating instructions carefully before using the product. Ensure you understand all safety notes to prevent personal injury or damage to property. Store the original packaging, receipt, and instructions for future reference. Include the operating instructions when passing on the product to another user.

Safety Precautions

Monitor the condition of the strap regularly. Do not use the strap if it shows signs of wear or damage. Withdraw the strap from use if it is no longer safe to use.

Information on Use and Maintenance of Lashing Straps

Follow proper maintenance procedures outlined in the manual to ensure the longevity and effectiveness of the lashing straps.

Storage and Maintenance

Properly store the straps when not in use to prevent damage or premature wear. Regular maintenance will prolong the lifespan ofthe product.

Notes Regarding Environmental Protection

Dispose of the product responsibly according to local environmental regulations to minimize impact on the environment.

Contact Information

For any inquiries or assistance, refer to the contact information provided in the manual.

FAQ

Q: Can I use this ratchet strap for lifting heavy objects?

A: No, the ratchet strap is designed for securing and lashing objects inside vehicles and should not be used for lifting loads.

Q: Is it safe for children to use this product?

A: No, the ratchet strap is not suitable for use by children or individuals lacking experience or specialist knowledge.

Art. no.: 10334
Tensioning strap with ratchet
38 mm x 6 m, 500 kg, TÜV/GS

WARNING

Read the operating instructions through carefully prior to initial use and observe all of the safety notes!
Not observing such may lead to personal injury, damage to the device or to your property!
Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! When passing on the product, please include these opera-ting instructions as well.
Please check the contents of package for integrity and completeness prior to use!

PROPER USE OF THE PRODUCT

The ratchet strap is designed for the securing and lashing of ob-jects inside of or in the loading area of vehicles. Only to be used to tie down or lash, never use to lift loads! Observe the lashing specifi cations on the strap! Observe the regulations for securing loads in road traffic!
The ratchet strap is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required specialist knowledge. Keep children away from the device.
The ratchet strap is not designed for commercial use.
Utilisation according to the intended purpose also includes the observation of all information in these operating instructions, particularly the observation of safety instructions. Any other utilisation is considered to be counter to the intended purpose and may result in material damage or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.

SCOPE OF DELIVERY

1 x tensioning straps, 2-pieces with ratchet and J-hook
1 x Operating instructions

SPECIFICATIONS

Typ: QL0302
Lashing force, LC: 500 daN
Manual tensioning force, SHF: 50 daN
Pre-tensioning forc, STF: 100 daN
Length: LG: 6.00 m
Width: 38 mm
Elongation: < 7 %
Material: PES

SAFETY PRECAUTIONS

The warning triangle labels all instructions important to safety. Always follow these, otherwise, you could injure yourself or damage the device.
Children may not play with the device.
Cleaning and user maintenance may not be carried out by children without supervision.
Do not treat packaging material carelessly. It may become a dangerous plaything for a child!
Only use this product for its designated purpose!
Do not manipulate or disassemble the device!
For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
Observe the regulations for securing loads in road traffic!

MONITORING

• Before using, check the ratchet strap for potential damages. In the event of damage to the strap or the metal parts, immediately cease to use the ratchet strap.
• Ratchet straps contaminated with aggressive or other substances must be examined carefully and checked as required. The use of such can be dangerous.
• The Ratchet straps and components are to be checked at least once a year by a specialist. Depending on the conditions of use, an additional check may be required.

WITHDRAWAL FROM USE
The ratchet strap may no longer be used in the event of:

Thread breaks and cuts, especially when caused by sharp edges
Missing or no longer legible labelling
Damage to the connection
Damage or deformation due to the effects of heat
Damages caused by aggressive substances
The connecting and ratcheting elements may no longer be used in the event of:
Cracks, breaks or signs of considerable corrosion
Opening > 0.05 – x in hook mouth or other deformations
Visible, lasting deformation on carrying parts

INFORMATION ON THE USE AND MAINTENANCE OF LASHING STRAPS

The required lashing capacity, as well as the type of usage and load to be lashed, must be considered when choosing and using lashing straps. The size, shape and weight of the load determine the right choice, but so do the type of intended use, transport environment and type of load. For stability reasons, at least two lashing straps must be used for lashing down and two pairs of lashing straps for diagonal lashing.
The lashing strap chosen must be both strong and long enough for the intended use and demonstrate the correct length for the type of lashing. Good lashing practice must always be considered:
Attaching and removing the lashing straps must be planned before beginning the journey. Partial unloading should be considered during a longer journey. The number of lashing straps must be calculated in accordance with prEN 12195. Only lashing systems that are designed for lashing down with STF on the label may be used for lashing down.
Different types of lashing aids (e.g. lashing chains and lashing straps made from synthetic fi bres) must not be used to lash the same load, as they behave differently and their lengths may change while loaded. When using additional fitting parts and lashing equipment, make sure that they fi t the lashing strap during lashing.
Flat hooks (see D2 in Image 1) must be supported with the entire width at the base of the hook.
Before starting unloading, the lashings must be loosened enough for the load to stand alone.
Watch out for any low-hanging overhead lines nearby while loading and unloading.
The materials from which lashing straps are made possess different resistances to chemical influences. Instructions from the manufacturer or supplier must be followed, should the lashing straps potentially be exposed to che-micals. It should be taken into account that the effects of chemical influences increase under rising temperatures. The resistance of synthetic fibres to chemical influences is summarised as follows:
Polyamides are resistant to the eff ects of alkalis. However, they are aff ected by mineral acids.
Polyester is resistant to mineral acids, but is aff ected by lyes.
Polypropylene is aff ected by acids and lyes and is suitable for use in cases where high resistance to chemicals (except for some organic solvents) is requested.
Harmless acid or lye solutions can be concentrated enough to cause damage as a result of evaporation. Contaminated lashing straps must be taken out of operation immediately,rinsed in cold water and left to air dry.
Lashing straps which are in accordance with this part of European Norm EN 12195 are suitable for use within the following temperature ranges:
- a) – 40°C to + 80 °C for polypropylene (PP);
- b) – 40°C to + 100 °C for polyamide (PA);
- c) – 40°C to + 120 °C for polyester (PES).
  These temperature ranges may change, depending on the chemical environment. The recommendations of the manufacturer or supplier should be consulted in this case. Changes to the ambient temperature during transport may infl uence the strength of the webbing. The lashing capacity must be checked after entering warm areas.
Lashing straps must be taken out of operation or returned to the manufacturer for repair if they show any signs of damage. The following points should be considered to be signs of damage:
- for lashing straps (which must be taken out of operation): cracks, cuts, grooves and breakages in load-bearing fi bres and seams, deformation caused by heat infl uence.
- for end fi tting parts and tensioning elements: defor-mations, cracks, serious signs of wear and corrosion. Only lashing straps which bear identifi cation labels may be repaired. If there is any contact with chemicals, the lashing strap must be taken out of operation, and the manufacturer or supplier must be contacted.
Make sure that the lashing strap is not damaged by the edges of the load to which it is attached.
Regular visual inspections before and after each use are recommended.
Only legibly marked and labelled lashing straps may be used.
Lashing straps must not be overloaded: the maximum manual force of 500 N (50 daN on the label; 1 daN ≈ 1 kg) may only be applied with one hand. No mechanical aids such as bars or levers etc. may be used unless they are part of the tensioning elements.
Tangled lashing straps must not be used.
Damage to labels must be prevented by keeping them away from the edges of the load and, if possible, from the load itself.
Webbing must be protected from friction and wear, and damage caused by loads with sharp edges, by using protective covers and/or edge protectors.

LAS-10334-Tensioning-Strap-with-Ratchet-FIG-1

OPERATING INSTRUCTIONS

If these instructions are not observed, the result may be personal injury, damages to the vehicle or the load. Never load the strap in excess of the permitted lashing force specified on the label.

Before using, select the tensioning strap according to the intended method of lashing, the required lashing force, the surface of the load and check this (see labelling sticker). When tie-down lashing, it is recommend to ensure that the necessary pre-tensioning forces can be applied in a controlled manner.
Make sure that the vehicle parts that the load is secured to are suitable for the job and off er suffi cient stability. Remember that additional acceleration and lateral forces will be generated by the wind.
Tensioning straps may not be knotted.
Caution – When the road curves, or the vehicle brakes, the straps may yield. (Carry out brake testing) Protect objects with large surfaces from wind loads.
These straps are not suitable for lifting and carrying loads.
Permitted lashing force: 500 daN.
Do not tension the strap over sharp corners or edges.
Lashing straps may not be twisted and the full width must make contact.
No loads may be placed on top of the tensioning strap.
The strap may not be positioned up against a hot surface.
The tensioning strap may only be used at temperatures between -40°C and +120°C.
Always use 2 straps, either crossed over or in parallel.
The tip of the lashing hook may not be loaded unless it is a specialist hook designed specifi cally for this use.
In order to prevent a lashing hook from becoming loose and unsecured in a lashing point on the load area, it should be placed from the inside out.
When using polyamide of polyester tensioning straps, contaminations may be removed using ordinary solvents. The tensioning strap must be allows to dry fully. When using ordinary solvents, the applicable regulations are to be observed (e.g. data sheet for chlorinated hydrocarbon ZH 1/194)
Never position the hook and manual ratchet at an edge.
Never lengthen the tensioning lever of the manual ratchet in order to achieve greater forces when this is not expressly permitted.
In order to ensure it is securely positioned, 1.5 turns of the strap should be applied to the ratchet. Pre-tension the strap by hand so that not more than 3 turns of the strap must be applied to the manual ratchet in order to lash the load.

Fixture

Place the strap carefully around the transportation load and guide the loose end of the strap through the slot (1).
The strap is tensioned by moving the ratchet handle (3) back and forth. (See Figures A, B and C)
The transportation load is secured by bring the ratchet handle(3) to the home position, Figure A.
To open the strap, the ratchet locking mechanism (2) us pulled up and the ratchet handle (3) is pushed forwards (Figure D). Now pull the strap out of the slot (1).

STORAGE AND MAINTENANCE

STORAGE

Only store the straps in dry, lightly heated spaces.
Protect from major sunlight.
Do not dry or store the strap in the vicinity of fi re, radiators, heating pipes or other locations with extreme temperatures.
Never store with chemicals.

MAINTENANCE
Maintenance work may only be carried out by the manufacturer or persons named by the manufacturer.

NOTES REGARDING ENVIRONMENTAL PROTECTION

Please dispose of the tensioning straps via the recycling bin or the public/municipal collection points.
The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisation or other forms of reusing waste equipment!