NGP Door Sweeps Instructions
- July 29, 2024
- NGP
Table of Contents
NGP Door Sweeps
INSTRUCTION MANUAL
WARNING: These products can expose you to chemicals including chloroprene or DINP Diisononyl phthalate, which are known to the State of California to cause cancer and/or developmental and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
ADVERTENCIA: Estos productos pueden exponerlo a productos químicos incluyendo el cloropreno o ftalato de di-iosononilo DINP, que el estado de California considera causante de cáncer y/o daños al desarrollo y al sistema reproductivo. Para mayor información visite la página www.P65Warnings.ca.gov.
Installation Instructions
1. Cut sweep to fit.
2. Close door. Hold sweep at bottom of door. Tap down until contact is made
between the sweep and threshold.
3. Mark screw holes.
4. Drill pilot holes for screws using a 7/64″ drill bit.
5. Install with screws provided.
6. Adjust position so sweep does not impede proper closing and latching of
door.
POSITIVE PRESSURE TESTED GASKETING MATERIALS
FOR FIRE DOORS
FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS RATED UP TO 3 HOURS AND WOOD- TYPE FIRE DOORS RATED UP TO 1-1/2 HOURS.
CATEGORY H
Smoke and Draft Control gasketing (Category H) tested to UL 1784; meets
requirements of NFPA 105, IBC for use on “S” label doors.
Specifications:
- Brand: National Guard Products Inc.
- Customer Service: 1-800-647-7874
- Product: Door Sweeps
- Material: Positive pressure tested gasketing materials for fire doors
- Application: Hollow-metal-type fire doors rated up to 3 hours and wood-type fire doors rated up to 1-1/2 hours
- Category: H (Smoke and Draft Control gasketing)
Product Usage Instructions
Installation Instructions:
- Cut the sweep to fit the door.
- Close the door and hold the sweep at the bottom of the door.
- Tap down until contact is made between the sweep and threshold.
- Mark screw holes on the door.
- Drill pilot holes for screws using a 7/64 drill bit.
- Install the sweep with the provided screws.
- Adjust the position so the sweep does not impede proper closing and latching of the door.
Positive Pressure Tested Gasketing Materials for Fire Doors:
This product is designed for application to hollow-metal-type fire doors rated up to 3 hours and wood-type fire doors rated up to 1-1/2 hours. It falls under Category H for Smoke and Draft Control gasketing and has been tested to UL 1784. It meets the requirements of NFPA 105 and IBC for use on S label doors.
Frequently Asked Questions (FAQ)
Q: Are these door sweeps safe to use?
A: These door sweeps may expose you to chemicals including chloroprene or DINP Diisononyl phthalate, which are known to the State of California to cause cancer and/or developmental and reproductive harm. Please refer to www.P65Warnings.ca.gov for more information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>