Pipishell UL Listed Tilt TV Wall Mount Bracket Installation Guide
- July 27, 2024
- Pipishell
Table of Contents
UL Listed Tilt TV Wall Mount Bracket
Installation Guide
UL Listed Tilt TV Wall Mount Bracket
Question How Locate Wood Studs and Determine Spacing
Option A: Use an Electronic Stud Finder (Available on Amazon.com)
Preparation
Calibrate and operate the stud finder according to the manufacturer’s
instruction. Step 1
Move the stud finder horizontally across the wall at the height where you plan
to mount the TV. Step 2
Mark the edges and center of where the stud finder indicates studs. Step 3
Measure 16″ [406mm] or 24″ [61 Omm] to the left or right of the studs. Most
studs are spaced 16″ [406mm] apart in homes, though they can be 24″ [610mm] in
some cases.
Take multiple measurements to ensure the accuracy of the standard spacing.
Note: After measurement use the stud finder to confirm the stud edge
locations.
Begin at an Outlet
Step 1
Outlets are usually attached to one side of a stud.
[Use a stud finder to confirm which side of the outlet the wood stud s on and
mark the stud location.] Step 2 Measure 16″ [406mm] or 24″ Omm] to the left or
right of the studs. Most studs are spaced 16″[406mm] apart in homes, though
they can be 24 [610mm] in some cases.
Take multiple measurements to ensure the accuracy of the standard spacing.
Note: After measurement, a stud finder s required for confirmation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>