Pipishell PISM02 Soundbar Mount Instruction Manual

Pipishell PISM02 Soundbar Mount

Product Information

[email protected]
Website: www.pipishellav.com
(US/CA) Phone: 1-800-556-9829
(UK) Phone: 44-808-196-3885

Product Usage Instructions

Step 1: Prepare your TV (If mounted)

CAUTION: Follow your TV mount’s manual for instructions on how to safely remove your TV and TV bracket.

NOTE: Your TV wall mount may vary from the illustrations throughout this manual — the procedure to install the soundbar is the same.

1. If your TV brackets fit inside the vertical soundbar brackets, follow Figure a.
2. If your TV brackets do not fit inside the vertical soundbar brackets, follow Figure b.

Step 2: Attach the TV Brackets and Vertical Brackets to the TV

Select TV Bolts
Hand thread bolts into the threaded inserts on the back of your TV to determine which bolt (M4, M6, or M8) to use. A minimum of 4-5 turns into the threading is required. Do not turn past the bottom of the hole.

**Spacer and Bolt Configurations

**

Refer to the options below based on your TV type:

Option A: Add spacers if needed to fit the bolt length and TV
back.| Option B: Spacers must be tall enough so that the curved back
of the TV does not interfere with the mounting plate.
Option C: The TV brackets must be flush on the bump and leveled
by spacers over the gap.| Option D: Use spacers to create extra space between the TV and
TV brackets for TVs with protruding cables.
Option E: Spacers need to fill in the recessed holes on the
back of the TV, while keeping the TV brackets as close to the TV as
possible.|

Attach the TV Brackets and Vertical Brackets to Your TV

Follow the corresponding option instructions from Steps 2-2 to attach the TV brackets and vertical brackets to your TV.

Before getting started,
let’s make sure this mount is compatible.

1. Is the VESA pattern of your TV 75 x 75mm (3″ x 3″) to 600 x 400mm (23.6″ x 15.7″)?
2. Does the equipment you intend to use weigh less than 22 lbs (10kg)?
3. Tools Needed (NOT included)

Important Safety Information

NOTE

• Please read and understand these directions.
• Refer to the documentation that came with your soundbar, your TV and your TV wall mount for additional guidance.
• Carefully read all instructions before attempting installation. If you DO NOT understand the instructions or have any questions or concerns, please contact our Technical Support line at 1-800-556-9829 (US/CA) / 44-808-196-3885 (UK) or Customer Service at [email protected].
• Not all hardware included in this package will be used

CAUTION

• Avoid potential injuries and property damage!
• DO NOT use this product for any purpose that is NOT explicitly specified in this manual.
• DO NOT exceed weight capacity. We are not liable for damage or injury caused by an improper mounting, incorrect assembly, or inappropriate use.
• Before starting assembly, verify all parts are included and undamaged. DO NOT use damaged or defective parts. lf you require replacement parts, please contact our Technical Support line at 1-800-556-9829 (US/CA) / 44-808-196-3885 (UK) or Customer Service at [email protected].

WARNING

• This product contains small parts that may pose a choking hazard.
• This soundbar bracket is designed to be installed and utilized only as specified in this manual.
• This soundbar bracket is ONLY designed to mount BELOW the television.

**Contents

**

1. Hardware for Attaching the Brackets to the TV
2. Hardware for Attaching the Brackets to the Soundbar

Step 1 Prepare your TV [If mounted]

CAUTION : Follow your TV mount’s manual for instructions on how to safely remove your TV and TV bracket.
NOTE : Your TV wall mount may vary from the illustrations throughout this manual the procedure to install the soundbar is the same

• If your TV brackets fit inside the vertical soundbar brackets, follow Figure A.
• If your TV brackets do not fit inside the vertical soundbar brackets, follow Figure B.

Step 2 Attach the TV Brackets and Vertical Brackets to the TV

• Select TV Bolts
  Hand thread bolts into the threaded inserts on the back of your TV to determine which bolt (M4, M6 or M8) to use. A minimum of 4-5 turns into the threading is required. Do not turn past the bottom of the hole.

• Spacer and Bolt Configurations

• Attach the TV Brackets and Vertical Brackets to Your T

  • Option A: For Flat Back TVs
    Add spacers if needed to fit the bolt length and TV back.

  • Option B: For Curved TVs
    Spacers must be tall enough so that the curved back of the TV does not interfere with the mounting plate.

  • Option C: For TVs with a Bump
    The TV brackets must be flush on the bump and leveled by spacers over the gap .

  • Option D: For TVs with Protruding Cables
    Use spacers [F1] or [F2] to create extra space between the TV and TV brackets

  • Option E: For TVs with Recessed Holes
    Spacers [F1], and [F2] need to fill in the recessed holes on the back of the TV, while keeping the TV brackets as close to the TV as possible.

Step 3 Assemble the Bottom Brackets

• Slightly loosen the knobs on both vertical brackets.
• Insert the connecting rods [03] into the vertical brackets, then slide the brackets [04] onto the connecting rods. Do not secure them before choosing the soundbar bracket configuration on Page 11.
• Measure the distance between the mounting holes on your soundbar/width of your soundbar.
• Based on your soundbar measurements, choose a proper bracket configuration (See the following figures.)
• Retighten the knobs and secure the brackets [04] with washers [d] and bolts [b].

Step 4 Attach the Soundbar (Not Included)

• A : For a soundbar with back-mounted keyhole slots, follow the instructions on page 12.

• B : For a soundbar without any mounting holes or with bottom-mounted threaded inserts, go to page 13 and 14.

  • Option A: For soundbar with back-mounted keyhole slots
    Insert the keyhole screws [g] into the keyholes on the back of the soundbar, then secure to the mount with knobs [h] and washers [f].

  • Option B: For the soundbar without any mounting holes or with bottom-mounted threaded inserts Slightly loosen the bolts underneath to extend the clamps. Turn over the TV. Hang the clamps onto the brackets, making sure the hooks fit over the brackets.Place the soundbar on the clamps, then adjust the clamps to fit and secure by retightening the bolts. Also, tighten the bolts securing the clamps.

Step 5 Adjust the Soundbar Height (Optional)

NOTE : Depending on the type of TV wall mount you have, you may need to remove your TV from the wall to adjust the soundbar height.
CAUTION : Make sure to support your soundbar with one hand while moving it.

Step 6 Reattach the TV

860-00538-00 Rev02

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>