ATEN UC232A USB To Adapter User Guide
- July 26, 2024
- Aten
Table of Contents
UC232A / UC232A1 / UC232AF
USB to RS-232 Adapter
Quick Start Guide
USB To Adapter
Scan for more information
|
---|---
http://www.aten.com/products/productItem.php?model_no=UC232A|
https://www.aten.com/global/en/products/modelno/uc232a1/
|
https://www.aten.com/global/en/products/modelno/uc232af/|
http://www.aten.com/ext_libraries/manuals.php?n=uc232af
Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and specifi
cations contained in this package are subject to change without prior notifi
cation by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at:
http://www.aten.com/download/
Technical Support www.aten.com/support
UC232A / UC232A1 / UC232AF USB to RS-232 Adapter
A. Hardware Overview
- 1 USB connector
- serial connector
- connector nut
- power LED
B. Installation
To install the UC232A / UC232A1 / UC232AF, do the following:
-
Connect the USB connector to the computer and allow the drivers to install.
Note : If you are using an older computer that doesn’t contain the drivers for this device, please go to our website to download the UC232A / UC232A1 / UC232AF drivers and install them before setting up the hardware. -
Plug the RS-232 connector to a serial device.
-
Power on the serial devices.
© Copyright 2024 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd.
All rights reserved. All other trademarks are the property of their respective
owners.
Released: 03/2024
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>