SILVERCREST SMPS 7 E1 Manicure and Pedicure Set User Manual

SILVERCREST SMPS 7 E1 Manicure and Pedicure Set

Specifications

• Model: SMPS 7 E1
• Intended Use: Manicure & Pedicure Set
• Power Supply: Switched-mode power supply (SMPS)
• Voltage: Alternating current/voltage
• Frequency: Hertz
• Power: Watt
• Safety Class: Protection Class II

The Manicure & Pedicure Set SMPS 7 E1 is a high-quality product designed for manicure and pedicure procedures. It comes with various attachments to cater to different nail care needs.

Product Usage Instructions

• Safety Instructions
  • Before using the product, read and understand all safety instructions provided in the user manual. Use the product in dry indoor spaces only to prevent electrical hazards. Do not use the power adaptor if the pins of the plug are damaged.
• Attachments
  • Ensure the attachments are securely fitted before operation. Refer to the user manual for instructions on changing attachments.
• Before Use
  • Before using the Manicure & Pedicure Set, familiarize yourself with the product features and operation. Ensure the device is connected to a suitable power source as per the specifications provided.
• Changing Attachments
  • To change attachments, follow the instructions provided in the user manual. Make sure the device is turned off and unplugged before changing attachments for safety.
• Warranty Claim Procedure
  • If you encounter any issues covered by the warranty, refer to the warranty claim procedure outlined in the user manual. Follow the steps to avail of warranty services.

FAQs

• Q: Can I use the Manicure & Pedicure Set in wet conditions?
  • A: No, it is recommended to use the product in dry indoor spaces only to avoid electrical hazards.
• Q: How do I change the attachments?
  • A: To change attachments, first ensure the device is turned off and unplugged. Follow the instructions provided in the user manual for safe attachment changes.

Warnings and symbols used

MANICURE & PEDICURE SET

Introduction

• We congratulate you on the purchase of your new product.
• You have chosen a high-quality product. The instructions for use are part of the product.
• They contain important information concerning safety, use, and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use.
• Only use the product as described and for the specified applications.
• If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use

• This product is intended solely for the care and maintenance of fingernails, toenails, and feet.
• This product is only intended for private household use, not for commercial purposes.
• The power adaptor is intended for indoor use only.
• The manufacturer accepts no liability for damages caused by improper use.

Scope of delivery

After unpacking the product, check if the delivery is complete and if all parts are in good condition. Remove all packaging materials before use.

• 1 Main unit
• 1 Power adaptor
• 1 Sapphire cone
• 1 Felt cone
• 1 Coarse sapphire disc
• 1 Fine sapphire disc
• 1 Flame file
• 1 Cylindrical file
• 1 Sapphire callus remover
• 1 Storage bag
• 1 Instruction manual

Description of parts

(Fig. A)

1. Attachment fitting
2. button (increase speed)
3. button (reduce speed)
4. Main unit
5. Rotating direction indicator light
   • (red = clockwise,
   • green = counter-clockwise)
6. On/off/direction switch
7. DC socket
8. DC plug
9. Power adaptor
10. Storage bag
11. Sapphire callus remover
12. Cylindrical file
13. Flame file
14. Fine sapphire disc
15. Coarse sapphire disc
16. Felt cone
17. Sapphire cone

Technical data

Main unit

Rated voltage:| 30 V
Rated current:| 0 .25 A
Power adaptor

Manufacturer’s name or trademark, commercial registration number, and address:| E-TEK Electronics Manufactory Co ., LTD 91440300755667743W

B, 3 Bldg, Tangwupu Industrial Park, Yanchuan, Songgang Subdistrict, Baoan District, 518105 Shenzhen, Guangdong,

PEOPLE’S REPUBLIC OF CHINA

Model identifier:| ZD12D300025EU
Input voltage:| 100–240 V∼
Input AC frequency:| 50/60 Hz
Input current:| 0 .5 A
Output voltage:| 30 V
Output current:| 0.25 A
Output power:| 7 .5 W
Average active efficiency:| 82 %
No-load power consumption:| 0 .10 W
Protection class:| II/
Ingress protection:| IP20
Nominal ambient temperature (ta):| 40 °C

Safety Instructions

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!

• In the case of damage resulting from noncompliance with these operating instructions, the warranty claim becomes invalid!
• No liability is accepted for consequential damage! In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability is accepted!

WARNING! RISK OF LOSS OF LIFE OR ACCIDENT TO INFANTS AND CHILDREN!

• Never leave children unsupervised with the packaging material.
• The packaging material represents a danger of suffocation.
• Children frequently underestimate the dangers. Always keep children away from the packaging material.
• This product can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be done by children without supervision.
• This product can be used by children aged 3 years and above if they are continuously supervised. Children shall not play with the product.

WARNING! RISK OF INJURY

• Before use, check the product for visible external damage.
• Do not operate the product, if it has been damaged or dropped.
• All repairs must be carried out by authorized specialist companies or by the Customer Service department. Improper repairs can pose significant risks to the user. The warranty claim will also be invalidated.
• Extended use may cause extreme warming of the skin. Therefore, take frequent breaks. Otherwise, there is a risk of burns!
• WARNING! Keep the product dry.
• Do not use the product while bathing or showering.
• Never touch the product with wet or moist hands.
• Always operate the product with the supplied power adaptor.
• Do not use the power adaptor to charge any other device.

CAUTION! RISK OF PROPERTY DAMAGE!

• Defective components must always be replaced with original replacement parts.
• Compliance with safety requirements can only be guaranteed if original replacement parts are used.
• Protect the product from penetration by moisture and liquids.
• Protect the product against knocks, dampness, dust, chemicals, and extreme temperatures.
• Keep the product away from sources of heat (e.g. ovens, radiators).
• Never use the product under blankets, pillows, etc.
• Do not store the product where it could fall into a bathtub or wash basin.
• Never submerse the product in water or other liquids.
• No action is needed from users to shift the product between 50 and 60 Hz. The product adapts itself for both 50 and 60 Hz.
• After use: Always remove the power adaptor from the socket outlet.
• Never pull on the connection cord.
• The connection cord of the power adaptor cannot be replaced.
• If the connection cord is damaged, the power adaptor must be disposed of.
• Ensure that the drive can always rotate freely. Otherwise, the product may overheat and be damaged beyond repair.
• The power adaptor is intended for indoor use only.
• To disconnect the power supply to the product, pull the power adaptor from the socket outlet.
• The socket outlet that is used must be easily accessible so that the power adaptor can be quickly removed from the socket-outlet in the event of an emergency.
• In the event of a malfunction (unusual noises or smoke) or during thunderstorms, disconnect the power adaptor from the socket outlet.
• Never try to open the housing of the power adaptor – there is a risk of electrocution.
• To avoid damage caused by unwanted warming, do not cover the power adaptor.
• Repairs to the product during the warranty period may only be carried out by a customer service department authorized by the manufacturer. Otherwise, no additional warranty claims can be considered for subsequent damage.

Attachments

• Sapphire callus remover [11]:
  • For large-scale and rapid removal of thick hardened skin or calluses on the sole or heel of your foot
  • Guide the sapphire callus remover [11] over the parts of the sole and heel to be treated while exerting gentle pressure.
• Cylindrical file [12]:
  • For grinding off thick toenail surfaces and rough smoothing of the surfaces
  • Always hold the cylinder file [12] parallel to the nail surface and apply light pressure and circular movements to remove the excess growth.
• Flame file [13]:
  • For freeing ingrown nails
  • Guide the flame file [13] carefully onto the treatment area and cut away the affected nail part.
• Fine and coarse sapphire disc [14] [15]:
  • For filing and working the nails
  • Work the edge of the nail using the fine and coarse sapphire disc [14] [15]. Since only the inner disc rotates and the outer edge does not move, you can file your nails accurately without damaging your skin with the rapidly rotating disc.
  • Always work from the outside of the nail to the tip.
• Felt cone [16]:
  • For smoothing and polishing nail edges after filing, and for cleaning the nail surface
  • Use the felt cone [16] to polish and smooth the edge of the nail and to clean the nail surface after grinding.
  • Always polish in a circular motion and never let the felt cone [16] stay in one place.
• Sapphire cone [17]:
  • For removing dry skin, hardened skin, or calluses on the soles and heels
  • Guide the sapphire cone [17] over the parts of the sole and heel to be treated using a circular motion while exerting gentle pressure.
  • Do not press too firmly, and always guide the sapphire cone [17] carefully to the surface to be treated. Apply a moisturizing cream after every treatment.

Before use

• Only use the product with dry hands.
• Remove all parts from the packaging.

Changing the attachment

1. Unplug the main unit [4] each time before you change the attachment.
2. Pull the attachment out of the main unit [4], if any.
3. Select an attachment (see fig. A and the “Attachments” chapter).
4. Push the attachment into the main unit [4]. Make sure the attachment is installed firmly.

NOTE: Change the attachment when it looks or feels worn.

Operation

WARNING! RISK OF INJURY

• Excessively long or intensive treatment can also injure deeper layers of skin.
• Therefore, check the treatment progress and results regularly. Diabetics in particular are less sensitive on their hands and feet.

WARNING! RISK OF BURNS DUE TO SEVERE HEAT DEVELOPMENT!
While you are working, never let the attachments remain in one location. Friction leads to increased heat generation and may cause injuries. Always work with a circular motion.

1. Find a well-lit place to work. There must be a socket outlet nearby.
2. Insert the appropriate attachment for your purpose in the attachment fitting [1]. The attachment must sit securely.
3. Connect the DC plug [8] to the DC socket [7].
4. Plug the power adaptor [9] into a socket outlet.
5. Switch on the product.
6. Select the rotating direction:
   • NOTE: The indicator light [5] flashes when the highest or lowest setting has been reached. Always start the treatment at the lowest setting and only increase it when necessary.
     Speed| Press button
     ---|---
     Increase speed| Press 2 button.
     Reduce speed| Press 3 button.
7. Switch off the product: Slide the switch [6] to 0 position.
8. Disconnect the power adaptor [9] from the socket-outlet when you have finished the treatment.

NOTES:

• Set the speed to the lowest setting after you change the rotating direction or an attachment.
• If you have treated hardened skin, apply a moisturizing cream to the treated areas after completing the procedure.
• The attachments do not have as much effect on softened skin. Therefore, do not carry out any pretreatment in a water bath before using the product.
• Always select the rotating direction for treating the nails in their direction of growth.
• If possible, treat the nails from the outside towards the inside (to the nail tip). Otherwise, the nails will split more easily.
• If you feel that the nails could crack during treatment, select the other direction.

Cleaning and care

• WARNING! Risk of electrical shock! Before cleaning: Always disconnect the power adaptor [9] from the socket outlet.
• Do not use chemical, aggressive, or abrasive cleaning agents. These can damage the surface of the product.
• Clean the main unit [4] and the power adaptor [9] with a damp cloth. For stubborn soiling use a mild detergent on the cloth. Ensure that no water or moisture can penetrate the product. Dry all parts thoroughly.
• For hygienic reasons, we recommend cleaning the attachments with a clean cloth or brush moistened with alcohol after every use. Dry all parts thoroughly.

Storage

• After you have cleaned the product, put it back in the storage bag [10].
• Store the product in a dry and clean location.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with the following meaning: 1–7: plastics/20–22: paper and fibreboard/80–98: composite materials.

Product:

• Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
• To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste.
• Information on collection points and their opening hours can be obtained from your local authority.

Ordering accessories

You can order the following replacement parts for this product:

• [11] Sapphire callus remover
• [12] Cylindrical file
• [13] Flame file
• [14] Fine sapphire disc
• [15] Coarse sapphire disc
• [16] Felt cone
• [17] Sapphire cone

Order replacement parts via our website: www.optimex-shop.com.

Warranty

• The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects, you have legal rights against the retailer of this product.
• Your legal rights are not limited in any way by our warranty detailed below.
• The warranty for this product is 3 years from the date of purchase.
• The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.
• Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.
• Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted.
• This also applies to replaced and repaired parts.
• This warranty becomes void if the product has been damaged, used, or maintained improperly.
• The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

Warranty claim procedure

• To ensure quick processing of your claim, observe the following instructions:
  • Make sure to have the original sales receipt and the item number (IAN 444854_2307) available as proof of purchase.
  • You can find the item number on the rating plate, an engraving on the product, on the front page of the instruction manual (bottom left), or as a sticker on the rear or bottom of the product.
  • If functional or other defects occur, contact the service department listed below either by telephone or by e-mail.
  • Once the product has been recorded as defective you can return it free of charge to the service address that will be provided to you.
  • Ensure to enclose the proof of purchase (sales receipt) and a short, written description outlining the details of the defect and when it occurred.

Service

Service Great Britain

• Tel.: 0800 0569216
• E-Mail: owim@lidl.co.uk.
• OWIM GmbH & Co. KG
• Stiftsbergstraße 1
• 74167 Neckarsulm
• GERMANY
• Model No.: HG08879B/HG08879C
• Version: 01/2024
• www.lidl-service.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>