FORTIN 2005 TOYOTA Corolla Standard Key Remote Starters and Alarm Systems Installation Guide
- July 25, 2024
- FORTIN
Table of Contents
FORTIN 2005 TOYOTA Corolla Standard Key Remote Starters and Alarm
Systems
Specifications
- Manufacturer: Fortin
- Product Name: Immobilizer Bypass for Toyota Corolla 2005-2008
- Compatibility: Toyota Corolla 2005-2008
Product Usage Instructions
Installation Requirements
For proper installation and operation of the Immobilizer Bypass module, the following components are mandatory:
- Hood Pin Switch: Must be installed if the vehicle can be remotely started with the hood open.
Note: The installation of safety elements is mandatory for proper functioning.
Wiring Connections
Follow the wiring connections as specified in the user manual:
-
* Connect (-) Ground Out while running out RS14.- Connect RS7 Out to Starter (+).
Important Notes
This module must be installed by a qualified technician. Incorrect connections can cause permanent damage to the vehicle.
REGULAR INSTALLATION
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
DESCRIPTION
WIRING CONNECTION
PROGRAMMING PROCEDURE
The module is now programmed.
Use the remote of the remote starter or security system to test all of the
supported features to ensure proper programming.
Model Label
Notice: Updated Firmware and Installation Guides
Updated fi firmware and installation guides are posted on our website on a
regular basis. We recommend that you update this module to the latest fi
firmware and download the latest installation guide(s) prior to the
installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer-safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever of the accuracy or currency of the information
supplied. The installation in every case is the sole responsibility of the
installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no
liability or responsibility whatsoever resulting from any type of
installation, whether performed properly, improperly or in any other way.
Neither the manufacturer nor distributor of this module is responsible for
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by a qualified technician. The information supplied is a
guide only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPOR
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
FAQ
Q: Can I install the Immobilizer Bypass module myself?
A: It is recommended to have the module installed by a qualified technician to avoid any damage to the vehicle.
Q: Is the Hood Pin Switch necessary for installation?
A: Yes, the Hood Pin Switch is mandatory if the vehicle can be remotely started with the hood open.
Q: Where can I find updated firmware and installation guides?
A: Updated firmware and installation guides are available on the manufacturer’s website. Regularly check for updates before installation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>