FORTIN EVO TOYOTA Corolla 1 Way All In One Remote Starter Kit Installation Guide

: July 25, 2024
: FORTIN

Table of Contents

FORTIN EVO TOYOTA Corolla 1 Way All In One Remote Starter Kit
Product Usage Instructions
DESCRIPTION
PROGRAMMING PROCEDURE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FORTIN EVO TOYOTA Corolla 1 Way All In One Remote Starter Kit

Specifications

Vehicle Compatibility: Toyota Corolla Key 2005-2008
Firmware Version: 79.[65]
Features: Immobilizer bypass, Lock, Unlock, Arm, Disarm, Parking Lights, Hood Status, Foot-Brake Status

Product Usage Instructions

Mandatory Installation
To add firmware version and options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately).

MANDATORY INSTALLATION: The hood pin switch must be installed if the vehicle can be remote started with the hood open.

Notice: The installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.
Caution: This module must be installed by a qualified technician. Incorrect connections can cause permanent damage to the vehicle.

Description

At Ignition Harness

(+) IGNITION2
(+) 12V

At Parking Light Switch Harness

(+) PARKING LIGHTS
(+) IGNITION1
(+) STARTER
(-) PARKING LIGHTS

FAQ

Q: Is the hood pin switch necessary for installation?
- A: Yes, the hood pin switch must be installed if the vehicle can be remote started with the hood open for security reasons.
Q: Can I install this product myself?
- A: It is recommended to have this module installed by a qualified technician to avoid any potential damage to the vehicle due to incorrect connections.

| ALL| Page 1 / 6| REV.:| 20240502| Guide # 84881
---|---|---|---|---|---
REGULAR INSTALLATION INSTALLATION RÉGULIÈRE| ADDENDUM – SUGGESTED WIRING CONFIGURATION ADDENDA – SCHÉMA DE BRANCHEMENT SUGGÉRÉ

FIRMWARE VERSION VERSION LOGICIELLE

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately..

MANDATORY INSTALL

HOOD PIN
CONTACT

HOOD STAaTUS : THE HOOD PIN SWITCH MUST BE INSTALLED
IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE

DESCRIPTION

At Ignition harness
At Transponder connector
At Parking light switch harness
At Steering column
At Driver kick panel
At Brake switch

WIRING CONNECTION

PROGRAMMING PROCEDURE

Press and hold the programming button.
Insert the connectors: 20 pin (White),
6 pin (Red),
5 pin (White),
2 pin (White).
(If required)
Insert the 4-Pin (Data-Link) connector.
The LEDs will alternate between BLUE, YELLOW and RED flashes.
Release the programming button when the LED is RED.
If the LED is not solid RED disconnect the 4 Pin connector (Data-Link) and go back to step 1.
Insert one functional key into the ignition barrel.
DO NOT turn ON the key.
The RED LED will flash rapidly 10x times.
Key bypass programmed.
If the LED is solid RED disconnect the 4 Pin connector (Data-Link) and go back to step 1.
Remove the key from the Ignition barrel.

The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

All doors must be closed.
Remote start the vehicle.
Insert and Turn Insert and Turn Ignition ON/RUN position.
Press the brake pedal.
The vehicle can now be put in to gear and driven.
HARDWARE VERSION
Date: xx-xx
EVO-ALL
INTERFACE MODULE
PATENTS PENDING US: 2007-228827-A1
www.fortinbypass.com
000 102 04 2536
Service No
Module label

Notice: Updated Firmware and Installation Guides
Updated ﬁrmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest ﬁrmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualiﬁed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél 514-255-HELP (4357) 1-877-336-7797

ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE