MILESEEY PFS1 Pro Series Pulse Laser Rangefinder Instruction Manual

MILESEEY PFS1 Pro Series Pulse Laser Rangefinder

Product Overview
Thanks for choosing Mileseey’s rangefinder, please it read carefully the manual before using it. Mileseey’s PFS1 Pro is capable of wide vision and portable, with a design of black tone, metal texture, aluminum body, and anti- skidding rubber, which is delicate feeling, lightweight, perfect handhold feeling, and portable to carry. PFS1 Pro has equipped a field of view of 7.5 degrees, 6 times of magnification as well as high light transmission with a multi-coated lens, which makes it be the ultra view, HD clarity and suitable for watching.

Thanks to the TOF technology, it is ableto adjust the slope, flag lock, and distance measurement, etc. What’s more, it equips the vibration and slope switch. Super long-range, accurate measuring, instant response and low consumption of power, all of which could be the best hunting, helper for golfing, hiking and huntina and so on

Safety Instructions

Warning

• Do not stare into the laser beam.
• Eyes can be permanently damaged into the sun to look into sun with the device.
• Do not aim the device to the sun, it will cause permanent damage to inner to the inner components.
• Keep the eyepiece away from direct sunlight.
• Do not put the device out of the storage temperature of -10~60°C.

Disposal
Everyone is responsible for environmental protection. It’s prohibited to dispose of used batteries together with household waste, please collect used batteries tothe designated refuse collection center. This product must not be recycled with household waste. Dispose of the product appropriately in accordance with the national regulations in your country.

Scope of Responsibility
Mileseey will not be responsible for any loss if any use of accessories from other manufacturers without approval from Mileseey.

Appearance

1. Eyepiece knob

2. Power/measurement button
   Short press to measure, and long press to lock the flag

3. Mode option
   Short press to switch the function
   Long press to switch the unit(M. Y)

4. Laser emission lens

5. Laser receiver lens

6. Slope switch(Flagpole scanning Only when slope is off)

7. Battery bin

Icons on LCD Display
Insert the icon of the display, and display the following digital signs, refer to the example picture:

1. Low Battery Indicator

2. yardage/unit

3. Flaglock icon
   The flag would be locked on when the icon shows up

4. Measure remind
   This icon flashing means it’s measuring

5. Bull’s eye

6. From left to right: Golf Flagpole Scanning Icon/Measuring data/ Unit M

7. From left to right: Angle indicator/Angle data

Initial Operation and Settings

Eyepiece
Adjust the eyepiece knob to focus the target.

Power ON/OFF

1. Press the to power ON.
2. Automatically switch off after 16s of inactivity.

Distance Measurement

• Please adjust the eyepiece to focus the target before measuring. In the course of the measurement, if the target reflection is weak or is beyond the measuring range, it will display as”…”
• The measurement range will be affected by materials of the target, inclined angle of the target surface, visibility of the weather, etc. In general, if the target surface is smooth and bright with a larger area, the beam is perpendicular to the target surface and the weather is cloudy without fog, the measurement range will be longer, and vice versa.

Golf Slope Mode

Distance+Slope distance+Angle
Short press M to golf Slope mode, aiming at target B and short press the measured distance between A and B slope distance angle will be displayed on the screen accordingly. Slope adjusted angle/Slope range: -20° < a < 20 °

Flagpole lock mode
Long press to activate flagpole a raining limite dare B scanning when vibrating and displayed in the upper left corner of the screen, the scanning measurement is completed, the distance from A to B, the Slope distance and the angle a will be displaved on the screen accordingly.

Auto Height
Distance+Automatic vertical+Tilt Short press to switch to Auto Height , to aim at the highest point of the target, press the measuring button . the crow-fly distance from the rangefinder to the measured target would be displayed on the LCD screen, the vertical height would be displayed at the bottom of the screen, the tilt would be displayed at the bottom right of your screen

Auto level
Distance+Auto level+Tilt Short press to switch to Auto level 4, to aim at the target. press the displayed at the bottom of the screen, the tilt would be displayed at the bottom right of your screen.

Battery Installation and Instructions

Please use a 1xCR2 battery to power on the device. When you see the flashing icon please replace the battery or it will affect the accuracy. Please take the battery out if you are not going to use it for a long time.

1. PulI up the cover and rotate anti clockwise until the battery cover is opened.
2. Install 1xCR2 battery ,observing correct polarity.
3. The battery assembly is completed, turn it clockwise to tighten the hatters conor

Specification

Range
The maximum range shall be different according to different models. The actual range refers to the package. 2D is for a measured distance

Notice

1. In order to protect the coating of the lens, do not touch lens with your fingers.
2. The laser rangefinder has been precisely calibrated by instruments, please send back to the dealer for repair instead of disassembling by yourself.
3. When the lens is contaminated, please wipe gently with a clean cloth, do not use tough objects to wipe.
4. Avoid collision or heavy load when carrying or use, especially keep away from baking or corrosion.
5. Keep the product away from moisture during storage. Please keep it in a dry, cool and well-ventilated place to avoid direct sunlight, dust and temperature mutation.
6. Rain and fog will affect the laser ray- path, which may worsen the measurement accuracy. It also may cause error under very bad weather conditions.

Contact us
Shenzhen Mileseey Technology Co., LTD.

Website : www.mileseey.com (CN) www.mileseey.net (EN)
Telephone : +86 755 86329055 +86 752 3222711
Office Add : No.3601 Block A, Tanglang Town Plaza West, Fuguang Community, Taoyuan Street, Nanshan District, Shenzhen, China
Factory Add : Zhongkai Six Road #137,Chenjiang Avenue, Zhongkai High-tech Area. Huizhou, Guangdong 516029 China.(Floor 2 & 3 of Intelligent Tower, Innovation Park of Huizhou Tonghu Ecological Smart Zone)er very bad weather condition.

Copyrights
The product specifications are subject to change without notice, all final interpretation rights were reserved by Mileseey Technology Co., Ltd. All trademarks, product images, technical parameters are properties of Mileseey Technology Co., Ltd. All rights reserved.

Executive Standard : Q/MC 001-2017

Warranty Card

• Model name
• Invoice Code
• User Name
• User Info
• Address &Tel.
• Date of purchase
• Serial Number warranty period
• Dealer’s name, address, tel.
• Dealer
• Fault
• Description

Warranty Terms

Warranty Period

• This laser distance meter has two years warranty in the precondition of non-artificial damage. Within the warranty period, certain maintenance costs will be charged under following cases
• Damages caused by improper usage or maintenance of the tool;
• The tool had been disassemblad or mended by non-authorized third party;
• Without the warranty card or the purchase invoice;
• The serial number on the warranty card is different with the one on product;
• The serial number has been altered or abraded;
• Damaged by any force majeure factors;
• Replacement of the worn out accessories;
• Damages caused by the abnormal factors such as the temperature/humidity in usage;
• Damages caused by the improper operation.

Please send the tool with warranty card & purchase invoice to local dealer if maintenance needed. The warranty card will not be reissued if lost; please keen it carefullv for maintenance

Shenzhen Mileseey Technology Co., LTD. Telephone : +86 755 86329055 Factory Add : Zhongkai Six Road #137. Chenjiang Avenue,Zhongkai High- tech Area, Huizhou, Guangdong 516029 China.(Floors 2 & 3 of Intelligent Tower, Innovation Park of Huizhou Tonghu Ecological Smart Zone)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>