MILESEEY TNV30 Monocular Thermal Imaging Night Vision Device User Manual

MILESEEY TNV30 Monocular Thermal Imaging Night Vision Device

Product Overview

Thank you for purchasing and using Mileseey monocular thermal night vision. Please read the manual carefully before using.

Mileseey TNV30 is a hand-held night vision with advanced passive infrared thermal imaging technology. TNV30 can be used normally during the day and night , with functions such as hot tracking and photographing. It obtains 5 imaging mode of white heat, black heat, red heat, green heat and iron heat, which can meet the observation needs of different scenarios.

TNV 30 is internally installed with an infrared detector with 384×288 dpi, and an OLEO screen. The device also adopts special DDE imaging enhancement technology, making the imaging clearer and more delicate. The detecting range of TNV30 is 400 meters, and the magnification can be lX, 2X, 4X and BX.

TNV30 possesses super long battery life of 16 hours, and it has the firm appearance with IP65 and lm dropping resistance. It is therefore an excellent auxiliary means for observing and searching in outdoors.

Safety instructions

• In order to ensure the safe use of the product, please use the product in accordance with the instructions. Otherwise there will be no free warranty after the product is damaged.
• If the product breaks down or is damaged, please do not disassemble the device for maintenance. Please contact the local dealer or our company for maintenance in time.
• Please clean the device with wet cloth or weak soap solution. Do not use abrasive, isopropanol or solvent to clean the device housing, lens and interfaces .
• Please do not use this device in flammable, explosive, steam, humid or corrosive environment.
• Do not aim the lens at the sun, laser and other high-energy light sources; otherwise it will cause irreversible physical damage to the lens or thermal imaging detector.
• The device has a built-in lithium battery. Please charge it in the environment of O ‘C – 40 ‘C; otherwise the charging function will be turned off automatically.

Appearance

1. Lens Protector

2. Objective Lens Rotary Knob

3. Objective Lens

4. Power Button
   Long press to power on/ off;
   Short press for range measurement (carried with range measurement module only).

5. Photograph Button
   Short press to save the image.

6. Mode Button
   Short press to switch imaging modes.

7. Magnification Button
   Short press for electronic magnification of lX, 2X, 4X, SX;

8. Eyepiece

9. Eyepiece Rotary Knob

10. Micro SD Car d Port

11. Mini HDMI Port

12. Type-C Port

13. Range Measurement Module Port

14. Hand-Held Screen Frame/Tripod Port

Charging

This device uses large capacity 4500mAh lithium battery. The electric quantity is shown on the top right corner of the screen when the the device is powered on. When the device is on low power conditions, please use the original USB cable to charge. When the power light is red, it means the device is charging, whereas green means the charging is finished.

Power on/off

Press the power button to turn on the device.

Press the power button to turn off the device.

Attention:

1. When the device performs abnormally during using, it can be forcibly turned off by long pressing power button@ for.
2. The device can work 16 hours in normal temperature. When not using the device, please check whether the power is off or not, so as not to affect the operation next time.

Dioper adjustment
Adjust the eyepiece knob to focus on the target.

Electron Amplification
Short press the to switch electron amplification ti mes to lX, 2X, 4X, SX.

Imaging mode
Short press the M to switch five imaging modes: red heat, black heat, white heat, green heat, and iron red.

Photography
Short press the to save the image to the inner memory card.

Image Export
After the device is connected to the computer through the USB cable, long press the  to turn on the device. At this time, the device is used as a mobile storage device. The computer automatically recognizes the device and can directly read the files on the device’s memory card through the computer.

Hot spot tracking
After the device is turned on, it automatically turns on the hot spot tracking function in the lX status. The hot spot icon is displayed on the screen to track the real time highest temperature point in the image.

Laser ranging
The device can be connected with an external laser ranging module (optional) to realize the ranging function. When the device is connected to the ranging module through a USB cable, turn on the power of the laser ranging module, and the device screen will display a cross cursor. Aim the cursor at the target; press the button to measure the distance , and the target distance will be displayed on the screen.

External display
There is a 1/4-inch tripod interface at the bottom of the device, which can be connected to a hand-held screen stand (optional). After connecting the device with the external screen by the Mini HDMI cable, you can directly watch the device image on the external screen.

Technical parameter

Operating

Temperature

| -20°C~60°C
Waterproof| IP65
Battery| 4500mAh Li Battery
Charging/Data

Interface

| Type-C
Output| Support Mini HDMk Micro SD

(Maximum Expansion 32GB)

Size| l78.Sx5lx47mm

Contact Us

Shenzhen Mileseey Technology Co., LTD.
Website: www.mileseeytools.com
Email: service@mileseey.com

MILESEEY has started researching and development manufacturer of quality optical products including Golf rangefinders, laser measure device and binoculars since 2009.
Focus on the development, research, and manufacturing for over 13 years.
We strive to provide you with premium qualified products and satisfying customer service to make your life easier and smarter.

Warranty

Day return and refund guarantee, 12-month warranty, lifetime technique support by MILESEEY.
Please feel free to reach us with any concerns,
Email: service@mileseey.com
We strive to reply to you within 24hours.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>