MILESEEY TR256i Mobail Phone Infrared Thermal Imager User Guide
- June 11, 2024
- MILESEEY
Table of Contents
TR256i/TR160i
Mobile Phone Infrared Thermal Imager
User’s Guide 
Product Overview
Thank you for purchasing the handheld infrared thermal imager of Mileseey.
Please read the user guide carefully before using it
Mobile phone infrared thermal imager is a portable infrared thermal imaging
analyzer with high precision and quick response, which adopts an industrial-
grade infrared detector with small pixel spacing and high resolution ratio,
and is equipped with a 3.2mm lens.
The product is lightweight and portable. and can be used directly when plugged
in, With the customized professional thermal image analysis AP, it can be
connected to amobile phone to carry out infrared imaging of the target object,
making it possible to perform multi-mode professional thermal image analysis
anytime and anywhere.
Product Characteristics
- It has high-quality optical lens and high-resolution detector, with excellent imaging effect;
- It is lightweight and portable, and can be used with mobile APP to perform professional thermal imaging analysis anytime and anywhere;
- It has a wide temperature measurement range: ~15°C ~ 600°C;
- It supports high temperature alarm and customized alarm threshold;
- It supports the display of user-defined temperature range screen, and has many use scenarios for the display of high-temperature regions;
- It supports high and low temperature tracking;
- It supports adding points, lines and rectangular boxes for regional tempera- ture measurement, with lines and rectangular boxes supporting high and low temperature tracking and high temperature alarm;
- It has an aluminum alloy shell, which is firm and durable.
Appearance
APP Function Introduction
User Interface Introduction
Connect device to an Android phone or tablet and run App.
1| Setting| Provide App interface and parameter setting of infrared thermal
imaging camera
---|---|---
2| About| Some information about the App
3| Reset| Reset all information in the screen and restore it to the state at
startup
4| Photo Taking| Take photos and store them in the Album
5| Video Recording| Make a video recording and store it the Album
6| Album| Store photos and videos
7| Infrared thermal imaging| Display infrared thermal imaging
8| Temperature color bar| Display the maximum temperature and minimum
temperature in the current screen with different color block bars
9| Color palette| Different color palette can be switched to change the color
of the video
10| Regional Temperature Measurement| Points, lines and boxes can be added to
measure temperature in different regions
11| Temperature Tracking| The current maximum temperature, minimum temperature
and center point temperature in the screen can be tracked
12| Highlight Rectangle Temperature| The current temperature in all
rectangular boxes can be highlighted. If the current screen does not have a
rectangle, one will be added automatically
13| High Temperature Alarm| The high temperature alarm threshold can be set.
If the temperature in the video exceeds the threshold value, a sound and
screen alarm will be issued
14| Highlight High- temperature Regions| The maximum-temperature region in the
screen can be displayed
Function Introduction
Setting
Click the [ ] button to pop up the settings panel.
General items
Language| English
Temperature unit| The temperature units can be set, with Celsius (°C),
Fahrenheit (°F) and Kelvin (K) supported
Sound recording| Whether to record sound can be chosen when recording video.
High and low Temp switching| Low temperature range: -15°C-120°C
High temperature rang: 120°C-600°C
Parameter
Emissivity| Emissivity parameter values shall be filled in according to the
measured target
Humidity (%)| Parameter values shall be filled in according to the humidity of
the test environment
Correction (°C)| Correction parameters shall be filled in according to the
temperature measurement deviation
Table of Reflectivity of Common Materials
| Material | Emissivity | Material | Emissivity |
|---|---|---|---|
| Asphalt | 0.90 – 0.98 | Cloth (black) | 0.98 |
| Concrete | 0.94 | Skin (human body) | 0.98 |
| Cement | 0.96 | Leather | 0.75 ∼ 0.80 |
| Sand | 0.9 | Charcoal (powder) | 0.96 |
| Soil | 0.92 – 0.96 | Paint | 0.80 ∼ 0.95 |
| Water | 0.92 – 0.96 | Paint (matte) | 0.97 |
| Ice | 0.96 – 0.98 | Rubber (black) | 0.94 |
| Snow | 0.83 | Plastic | 0.85 ∼ 0.95 |
| Glass | 0.90 – 0.95 | Wood | 0.9 |
| Pottery | 0.90 – 0.94 | Paper | 0.70 ∼ 0.94 |
| Marble | 0.94 | Chromium oxide | 0.81 |
| Plaster | 0.80 – 0.90 | Copper oxide | 0.78 |
| Mortar | 0.89 – 0.91 | Ferric oxide | 0.78 ∼ 0.82 |
| Brick | 0.93 – 0.96 | Textile | 0.9 |
Interface Reset
Click the[ ] button to used to reset the AP interface and APP settings and
restore the APPto its default state at startup
Photo Taking
Click the [ ] button to take the current infrared screen and save it into the
album
Video Recording
Click the [ ] button to record a video. When the[ ] button is clicked, the
button will turn red accordingly, and the recording time will be displayed
correspondingly in the lower left corner of the video window at the same time.
Click the[ ] button again to stop video recording.
Albam
Click the [ ] button to taken by the APP can be conveniently viewed all photos
and videos. All files arranged in chronological descending order.
| 1 | Album | Photos and video files are displayed at the same time |
|---|---|---|
| 2 | Photo | Only photo files are displayed |
| 3 | Video | Only video files are displayed |
| 4 | Trash | Files are selected and then deleted |
Color Palette
Click the [ ] button to switch six colors and imaging modes.
Iron| | In the high-temperature region, red has a large proportion, which is
suitable for detecting the
scenario where the high-tem- perature region occupies the main proportion
---|---|---
White hot| | The high-temperature section adopts white, and the full screen
mainly adopts white-and-black
transition, which is suitable for users of black-and-white traditional mode
Black hot| | The high-temperature section adopts black, and the full screen
mainly adopts black-and-white
transition, which is suitable for users of black-and-white traditional mode
Rainbow| | Red is used for displaying the maximum temperature, yellow is used
for displaying the medium
temperature, and blue and black are used for displaying the low temperature,
which is suitable
for scenarios with distinct colors of high and low temperature
Red heat| | The main colors are red and black, and from the minimum
temperature to the maximum temperature, the black, white and red transition
mode is adopted, which is suitable for scenarios
focusing on the high temperature state
Cold blue| | Blue is used to mark the colder regions, which is more suitable
for observing low-temperature
target objects
By adjusting the color palette bar on the right side of the screen, the temperature range can be adjusted to make the regions that need to be observed more obvious.
Comparison diagram
Regional Temperature Measurement
Click the [ ] button, and the following interface will pop up, allowing the temperature measurement of points, lines and rectangular boxes to be added to the video, in which the lines and rectangular boxes will display the real-time maximum temperature and minimum temperature of the region. By long pressing each region, the trash icon will pop up for deletion.
Temperature Tracking
Click the[ ] button to enable or disable the measurement of the maximum
temperature, minimum temperature and center point temperature in the real-time
screen. Red is the maximum temperature, blue is the minimum temperature, and
yellow is the center point temperature. Click to turn on temperature tracking,
and click again to turn it off.
Highlight Rectangle Temperature
Click the [ ]button to the current tempera-ture in all rectangular boxes can
be highlighted. If there is no rectangular box in the current screen, a
rectangular box will be automatically added in the default position.
By long pressing the rectangular box, its size can be adjusted and its
position can be dragged, and by clicking the delete icon next to it, the
rectangular box can be deleted.
Regional Temperature Measurement
Click the [ ] button, and a window for setting the high temperature alarm
threshold value pops up on the interface, as shown in the figure below When
the maximum temperature value in the screen is higher than the alarm threshold
value (in the regional temperature measurement mode, the temperature in the
region is taken as the benchmark, except point measurement), the system will
sound an alarm, and the video screen will flash a red alarm.
Highlight High-temperature Regions
Click the [ ]button, the high temperature region is displayed on the current
color palette, and the other regions are displayed as white hot, and the
temperature range can be adjusted by the slider on the right side of the color
board bar. The analysis mode of highlighted high-tempera-ture regions
facilitates most application scenarios that focus solely on temperature values
of high-temperature regions.
APP Download
Please scan the QR code and download the Mileseey Thermal APP via mobile browser. (Android system Only)
http://app.mileseey.net/MileseeyThermal.apk
Specifications
| Infrared thermal imaging | TR256i | TR160i |
|---|---|---|
| Resolution | 256×192 | 160×120 |
| Wavelength | 8 – 14 pm | |
| Frame rate | 25Hz | |
| NETD | < 50mK @25°C | |
| Lens | 3.2mm | |
| FOV | 56° x 42° | 35° x 27° |
| Temperature measurement range | -15°C – 600°C | |
| Temperature measurement accuracy | ± 2°C or ± 2% | |
| Temperature measurement | Highest, lowest, central point and area temperature |
measurement are supported
Color palette| Iron, white hot, black hot, rainbow, red hot, cold blue
General items
Working temperature| -10°C – 75°C
Storage temperature| -45°C – 85°C
IP rating| IP54
Dimensions| 34mm x 26.5mm x 15mm
Net weight| 19g
Precautions for Use and Maintenance
- Please don’t use alcohol, detergent and other organic cleaners to clean the lens, it will destroy the coating of the lens.
- Do not let sunlight, laser and other strong light sources directly direct shot the lens, otherwise the thermal imager will suffer irreparable physical damage.
- Please enable the OTG features in the mobile phone settings to run the APR please search OTG in settings, some mobile phone default enable OTG.
Copyright Statement
All contents of this manual are copyrighted by Shenzhen Mileseey Technology
Co., Ltd., which shall not be imitated, copied or translated in any way
without the permission of the Company. This manual contains no warranty,
expression of position or other implication in any form. The product
specifications and information mentioned in this manual are for reference only
and will be updated from time to time without prior notice.
Shenzhen Mileseey Technology Co., Ltd. Office Add: No.3601 Block A, Tang lang
Town Plaza West, Fuguang Community, Taoyuan Street, Nanshan District,
Shenzhen, China Web: www.mileseeytools.com E-mail:
service@mileseey.com Made in China MILESEEY has
started researching and development manufacturer of quality optical products
including laser level, laser measure device, Golf rangefinder, and binoculars
since 2009. Focus on the development, researching, and manufacturing for over
12 years. We strive to provide you with premium qualified products and
atisfying customer service to make your life easier and smarter.
Warranty
30-Day return and refund guarantee, 12-Month warranty, lifetime technique
support by MILESEEY. Please feel free to reach us with any concerns, Email:
service@mileseey.com.
We strive to reply to you within 24hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>