MILESEEY D5 Professional Laser Distance Meter User Manual

MILESEEY D5 Professional Laser Distance Meter

User Manual
Thank you for purchasing the MILESEEY laser distance meter, please read the manual carefully before using it.
MILESEEY D5 Laser Measure has 9 functions:­to that satisfy different measuring needs and greatly improve user experience.

CAUTION

For the safe use of this hand-held laser distance meter, please read the below instructions carefully.

1. The device is categorized into Class 2 laser products. DO NOT stare at the laser directly or shoot at others or it will cause damage to eyes.
2. The product is under strict standards and regulations through development and manufacturing, but still can’t entirely exclude the possibility of interference with other devices, which may cause discomfort to humans and animals.

• Please DO NOT use this product in an explosive or corrosive environment.
• Please DO NOT use this product near medical devices.
• Please DO NOT use this product on the plane.

Disposal
Everyone is responsible for environmental protection.

It’s prohibited to dispose of used batteries together with household waste, please collect used batteries to a designated waste station.
This product must not be recycled with household waste. Dispose of the product appropriately under the national regulations in your country.
Scope of Responsibility
MILESEEY will not be responsible for the damages caused by improper use below:

• Using the product without instruction;
• Use of accessories from other manufacturers without approval from MileSeey;
• Carrying out modification or conversion of the product.

BUTTON FUNCTIONS

1. Measure button / Long press to enter Continuous measurement (Min / Max)
2. Area / Volume / Pythagorean button
3. Measuring reference / Unit button
4. Historical memory button
5. ON/OFF/Return/Clear button
6. Add(+ )/Subtract(-) button
7. Mute button/Bluetooth button

LCD DISPLAY

• 1. Laser on
• 2. Reference point (front)
• 3. Reference point (rear)
• 4. Distance /Continuous measurement
• 5, 6, 7, 8 . measuring mode indication 9 . Battery status
• 10. Historical memory
• 11. Value 1
• 12. Value 2 / Min value
• 13. Value 3 / Max value
• 14. Summary line/latest value/calculation result
• 15. Angle
• 16. Bluetooth

INITIAL OPERATING AND SETTING

Power On/Off

• Power on/off (manually)
• Long press to switch on/off the device.

Power off (automatically)

• The instrument switches off automatically after three minutes of inactivity.

Return/ Clear

• When measuring, press to undo the last action or clear the measured value.

Adjusting Measuring Reference

• Press to switch the reference point between the front and the rear of the instrument.
• The default reference setting is from the rear reference.
• The reference point can be set and saved manually.

Unit Change

• Long press to change distance unit between m, ft, in and ft+in.

Beep On/Off

• Press to switch on/off the beep.

Smart Life
Device Operation The Bluetooth will be automatically opened when the device is turned on. The ICON flashing means Bluetooth is not collected with the APP, If the Bluetooth ICON is still, it means Bluetooth is connected with the APP successfully.

On Smartphone APP
Turn on Bluetooth in the smartphone and connect it with the device on the APP, when Bluetooth ICON on the smartphone turns to blue and Bluetooth ICON on the device doesn’t flash, means it connected successfully, then users can measure the distance by handling APP and transferring data to the APP.

APP DOWNLOAD

Single Distance Measurement

• Press to activate the laser.
• Press again to trigger the distance measurement. The measured value is displayed immediately.

Continuous Measurement(Min / Max)

• Long press the key to activate continuous measurement. The maximum and minimum distances measured are shown in the display. The last measured value is displayed in the summary line.
• This function will be stopped automatically after 5 minutes of inactivity.
• Users can press   to stop the function

Area Measurement

• Press once, and the symbol appears in the function field of the display.
• Press to take the first distance measurement (e.g. Length).
• Press again to take the second distance measurement (e.g. width).
• The results of length, width, perimeter and area are displayed on the screen.

Volume Measurement

• Press twice, and the symbol appears in the function field on the display.
• Press to take the· first ‘distance measurement (e.g. Length). Next, get the width, then height, the result of length, width, height and volume is displayed orderly.

Tips For Pythagorean Measurement

Pythagoras measurement can be applied to the different flat surfaces, please make sure the vertical edge is perpendicular to the measured object.
NOTES

1. AII measured points should be on the same horizontal or vertical plane.
2. ln order to get more accurate measurement results, the laser rangefinder should be measured at a fixed rotation at a point
3. According to the Pythagoras Theorem, the right-angle side cannot be larger than the hypotenuse; otherwise, there is a calculation error.

Pythagorean Method-Tow points

• Refer to Figure 1. Press 3 times to activate the function, and the symbol appears in the function field on the display.
• Take measurements with the 2 points shown in the below figure in numeric sequence, the height of the object will be calculated automatically and displayed on screen.

Pythagorean Method-Three points (1)

• Refer to Figure 2. Press   4 times to activate the function, and the symbol appears in the function field on the display.
• Measure with the 3 points shown in the below figure in numeric sequence, the height is calculated and displayed on the summary line.
• Press to delete any measured length and then press to re-measure.

Pythagorean Method-Three points (2)

• Refer to figure. Press 5 times to activate the function. the symbol appears in the function field on the display.
• Measure the 3 points shown in the below figure in numeric sequence, the result is calculated and displayed on the summary line.
• Press to delete any measured length and then press . to re-measure.

Auto Level Measurement

• Press to select Auto Level Measurement The side of the triangular icon will flash to indicate user when to press the measur­ing button -, the horizontal distance, vertical height, and angle will be calculated automatically.

Auto Height Measurement

• Press to select Auto Height Measurement The sides of the triangular icon will flash to indicate to the user when to press the measuring button -. Measure side 1 and side 2. The perpendicular distance could be calculated on the screen.

Addition / Subtraction

• Addition: press
• Subtraction: long press
• Take a measurement, then press , the addition I subtraction symbol will appear on display, then press-button to take the second measurement, and the second value will be automatically added to/subtracted from the first one.

Note: This process can be repeated as required.

HISTORICAL MEMORY

• Continuous long press to view historical memory, the last 30 measured values will be displayed in reversed order.
• Press to quit historical value viewing.

TROUBLESHOOTING

All errors or failures will be shown as codes. The following table explains the meaning of codes and solutions.

Calculation error

| Refer to the user manual, and repeat the procedures.
208| Excessive current| P_lea_se contact your d1stnbuter
220| Battery low| Replace new batteries.

252

| Temperature too high|

Working temperature of this device is 0°C – +40°C (32°F – +104°F)

253| Temperature too low

255

| Received signal too weak or measurement time too long| Use a target plate or change a good reflective surface.

256

|

Received signal too strong

| The target is too reflective. use a target plate or do not aim at the strong light objective.

261

| Outside of the range of measurement| Select the measurement distance within the range of measurement.

500

|

Hardware error

| Switch on/off the device several times.

If the symbol still appears, please contact your

dealer for assistance.

SPECIFICATION

Documents / Resources

| MILESEEY D5 Professional Laser Distance Meter [pdf] User Manual
D5, D5 Professional Laser Distance Meter, Professional Laser Distance Meter, Laser Distance Meter, Distance Meter, Meter
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>