FORTIN 2022-2023 Automatic Transmission Vehicles Installation Guide
- July 25, 2024
- FORTIN
Table of Contents
- FORTIN 2022-2023 Automatic Transmission Vehicles
- Specifications
- FAQs
- STAND-ALONE INSTALLATION
- Parts required
- MANDATORY INSTALL
- STAND-ALONE CONFIGURATION
- REMOTE STARTER FUNCTIONALITY
- DESCRIPTION
- AUTOMATIC TRANSMISSION WIRING CONNECTION
- PROGRAMMING PROCEDURE
- FUNCTIONS
- CONTACT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FORTIN 2022-2023 Automatic Transmission Vehicles
Specifications
- Model: EVO-ALL
- Compatibility: Chevrolet Silverado 1500, GMC Sierra 1500 (2022-2023)
- Firmware Version: 80.[03]
FAQs
- Q: Do I need a qualified technician for installation?
- A: Yes, this module must be installed by a qualified technician to avoid any potential damage to the vehicle.
- Q: How do I program the bypass options?
- A: Use the FLASH LINK UPDATER or FLASH LINK MOBILE tool to program the bypass options based on your vehicle’s requirements.
- Q: What should I do before starting the installation process?
- A: Before proceeding with the installation, ensure to disconnect the negative (-) battery post and reconnect it after all vehicle connectors are reconnected.
STAND-ALONE INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.
Parts required
Parts required (Not included)
- 1x Vehicle Key
- 1x ARE-1R0
- 1x 1 Amp. Diode
- 1x 1.5 K Ohm resistor
- 1x 7.5 Amp. Fuse
NOTES
- 1 KEY REQUIRED FOR THE INSTALLATION
MANDATORY INSTALL
- HOOD PIN
- HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF. A11 OFF NON
- Notice: the installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.
- THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
PARTS REQUIRED (NOT INCLUDED)
MANDATORY
Notice: the installation of safety elements is mandatory. The hood pin and the valet switch are essential security elements and must be installed.
STAND-ALONE CONFIGURATION
REMOTE STARTER FUNCTIONALITY
REMOTE STARTER DIAGNOSTICS
- MODULE RED LED
- x2 flash: Brake ON
- x3 flash: No tach
- x4 flash: Ignition before start
- x5 flash: Hood Open
REMOTE STARTER WARNING CARD
- CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: Or use the package RSPB, Sold separately.
- WARNING: REMOTE STARTER
- THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.
NOTES
- ATTENTION WARNING Disconnect the negative (-) battery post before proceeding with the installation and reconnect it after making sure all vehicle connectors are reconnected.
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
FUNCTIONS
The engine will shut down when a door is open if the vehicle is not Unlocked.
Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly. We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.
WARNING
- The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
- It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used.
- FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever about the accuracy or currency of the information supplied.
- The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly, or any other way.
- Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects.
- This module must beinstalled by a qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
- Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
CONTACT
- TECH SUPPORT
- Tél: 514-255-HELP (4357)
- 1-877-336-7797
- www.fortinbypass.com
- MODEL: EVO-ALL
- DATE: 02/2019
- FORTIN.CA
- SN: 000000 00000
- MADE IN CANADA
- © 2018 ALL RIGHTS RESERVED
- REV.: 20240521
- Guide # 110661
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>