FORTIN THAR-GM6 T-Harness For GM Push To Start Vehicles Installation Guide

FORTIN THAR-GM6 T-Harness For GM Push To Start Vehicles

Specifications

• Product: THAR-GM6 HARNESS
• Vehicle Compatibility: Chevrolet Silverado 1500, Silverado 1500 Limited, Silverado 2500, Silverado 3500, GMC Sierra 1500, Sierra 1500 Limited, Sierra 2500, Sierra 3500
• Push-To-Start Models: 2019-2021, 2022, 2020-2023
• Bypass Firmware Version: 70.[465] (Minimum)

FAQs

• Q: Can I install the THAR-GM6 THARNESS myself?
  • A: This module must be installed by a qualified technician to prevent any potential damage to the vehicle.
• Q: How do I program the remote starter option?
  • A: Enable the feature and press the lock button on the OEM remote three times to initiate remote start.
• Q: What should I do if I encounter difficulties during installation?
  • A: If you face challenges during installation, it is recommended to seek assistance from a professional installer or contact customer support for guidance.

THARNESS INSTALLATION

THAR-GM6 THARNESS INSTALLATION

ADDENDUM – SUGGESTED WIRING CONFIGURATION

• Parts required (Not included): 1X THAR-GM6

MANDATORY INSTALL

• HOOD PIN
  • HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF. A11 OFF NON
  • SECURITY STICKER Notice: the installation of safety elements is mandatory. The hood pin and the sticker are essential security elements and must be installed.
  • THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

• Program remote starter option for R.S. OEM REMOTE STAND-ALONE: 38 2
• Enable Press 3x Lock to remote start with the OEM remote

AUTOMATIC TRANSMISSION WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE

REMOTE STARTER PROGRAMMING PROCEDURE

• REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly. We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.

WARNING

• The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
• It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used.
• FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever for the accuracy or currency of the information supplied.
• The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly, or in any other way. Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects.
• This module must be installed by a qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
• Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

CONTACT INFORMATION

• TECH SUPPORT
  • Tél: 514-255-HELP (4357) 1-877-336-7797
  • www.fortinbypass.com.
• INTERFACE MODULE
  • Made in Canada
  • PATENTS PENDING US: 2007-228827-A1
  • www.fortinbypass.com.
  • Service No: 000 102 04 2536
  • REV.: 20240627
  • Guide # 107951

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>