FORTIN XT5 Evo All Plug and Play Remote Start Kit Installation Guide
- July 25, 2024
- FORTIN
Table of Contents
- FORTIN XT5 Evo All Plug and Play Remote Start Kit
- Product Information
- Product Usage Instructions
- MANDATORY INSTALL
- PARTS REQUIRED
- STAND-ALONE CONFIGURATION
- REMOTE STARTER FUNCTIONALITY
- DESCRIPTION
- AUTOMATIC TRANSMISSION WIRING CONNECTION
- KEY BYPASS PROGRAMMING PROCEDURE 1/3
- REMOTE STARTER FUNCTIONALITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FORTIN XT5 Evo All Plug and Play Remote Start Kit
Product Information
Specifications:
- Vehicle Compatibility: Cadillac XT5, XT6
- Start Type: Push-To-Start
- Model Years: 2017-2024 (XT5), 2020-2024 (XT6)
- Firmware Version: 70.[45]
Product Usage Instructions
Installation:
For stand-alone installation, follow these steps:
- Ensure the vehicle is compatible with the immobilizer bypass module.
- Program the bypass option using the specified tools (FLASH LINK UPDATER or FLASH LINK MOBILE).
- Install necessary parts like the hood pin switch, fuse, and resistor (not included).
- Connect the module according to the provided wiring diagram.
- Ensure all safety elements are installed correctly, especially the hood pin for remote starting.
- It is recommended to have the module installed by a qualified technician to avoid damage.
Usage:
To use the remote starter:
- Ensure all doors are closed.
- Activate the remote start function by pressing the lock button on the OEM remote three times consecutively or using a smartphone app.
- Check the diagnostic LED on the module for status indications (e.g., tachometer, ignition, hood open).
- Always turn on the safety switch located under the dashboard before any maintenance work.
FAQ
-
Q1: What should I do if my vehicle does not have a functional hood pin?
Answer: If your vehicle does not have a functional hood pin, make sure to set function A11 to OFF and consult a qualified technician for further assistance. -
Q2: How can I monitor my vehicle remotely using this system?
Answer: You can monitor your vehicle remotely by programming the OEM Remote Monitoring option and following the instructions provided in the user manual.
MANDATORY INSTALL
Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
PARTS REQUIRED
Notice: the installation of safety elements are mandatory. The hood pin and the valet switch are essential security elements and must be installed.
STAND-ALONE CONFIGURATION
REMOTE STARTER FUNCTIONALITY
REMOTE STARTER WARNING CARD
CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package
RSPB, Sold separately.
WARNING REMOTE STARTER: THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.
DESCRIPTION
BCM located on the passenger side center console:
AUTOMATIC TRANSMISSION WIRING CONNECTION
KEY BYPASS PROGRAMMING PROCEDURE 1/3
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides.
Updated firmware and installation guides are posted on our website regularly.
We recommend that you update this module to the latest firmware and download
the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer-safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by a qualified technician. The information supplied is a
guide only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-779
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>