levenhuk Atom Digital DB10/DB20 LCD Binoculars User Manual

: June 3, 2024
: levenhuk

Table of Contents

Atom Digital DB10/DB20 LCD Binoculars
Specifications
Getting started
Copying files
Cleaning and precautions
Battery safety instructions
Levenhuk International Lifetime Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Levenhuk Atom Digital DB10/DB20
LCD Binoculars
User Manual

Atom Digital DB10/DB20 LCD Binoculars

1 LCD screen
2 Objective lenses
3 Power on/off
4 Left button
5 MENU button
6 Right button
7 Focusing wheel| 8 MODE button
9 Camera/OK button
10 Eyepieces
11 USB and microSD slots
12 LED indicator
13 Reset
14 Diopter adjustment ring
---|---

Never, under any circumstances, look directly at the Sun, another bright source of light, or at a laser through this device, as it may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS.

Specifications

Product ID	81703	81704
Model	Levenhuk Atom Digital DB10 LCD	Levenhuk Atom Digital DB20 LCD
Magnification, x	digital: 1–8optical: 10	digital: 1–8 optical: 12
Objective lens diameter, mm	25	32
Field of view, °	8
Close focus, m / ft	10 / 32.8
Observation distance, m / ft	10–1000 / 32.8–3280
Operating temperature range, °C / °F	−20…+60 (operating), −30…+70 (storage)

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Getting started

Install batteries

Open the battery compartment cover and insert the battery according to the correct polarity marks. Close the cover.

Charging the device

Connect the power cable to the device and the DC adapter (not included) via a USB plug and connect it to the AC power supply.
Attention! The device operates from the AC power supply, as the voltage of the computer’s USB port is insufficient for the proper operation of the device.

Installing/removing the memory card

The device supports memory cards class 10 up to 32GB.
Insert the microSD card into the slot. Make sure the direction is right. Do not force the card in.
Format the microSD card before starting, as it will improve its compatibility with the device.
To remove the card from the slot, press the edge of the memory card in gently, and the card will pop out. Then, remove the card.

Power on/off

Press and hold the POWER button until the LCD screen is on in order to turn the device on.

MENU button
To change the settings, press the MENU button and highlight the desired menu item by scrolling up or down using the Right and Left buttons.
Select the highlighted item by pressing the Camera/OK button.
In the menu, you can select photo or video resolution, change the language, set the date, set auto power off, format the memory card, view and delete the current file or all files from the memory card, etc.
Note! To get to the submenu of the playback mode, you need to select the playback mode first (MODE button).

MODE button
This button switches between 3 in-built modes: 1) photo mode; 2) video mode; and 3) playback mode.

Camera/OK button
Button functions: 1) takes a picture in Photo mode; 2) starts and stops video recording in Video mode; 3) enters the sub-menu.

RESET button
Press this button to reset the device if it has stopped functioning.

Copying files

You can transfer files from the device to your smartphone, tablet, or PC directly, without installing an app.

Insert the memory card into a card reader; or
Connect the device to your computer with a USB cable.

Cleaning and precautions

Do not expose the device to direct sunlight — that could cause a fire!
Do not scratch or touch the optical surfaces with your fingers.
Remove the batteries before cleaning the device! Use only dry, lint-free cloths to wipe the outer parts of the device. Do not use cleaning fluid to avoid the electronics damage. To avoid scratching the lenses, only use a soft cloth and do not press too hard. Keep the device away from dust and water. Keep the device in a bag or a box. Remove the batteries from the device if it has not been used for a long time.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Levenhuk International Lifetime Warranty

All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met.
For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.

www.levenhuk.com
Levenhuk Inc. (USA): 928 E 124th Ave. Ste D, Tampa, FL 33612, USA, +1-813-468-3001, contact_us@levenhuk.com
Levenhuk Optics s.r.o. (Europe): V Chotejn 700/7, 102 00 Prague 102,
Czech Republic, +420 737-004-919, sales-info@levenhuk.cz
Levenhuk® is a registered trademark of Levenhuk, Inc.
© 20062022 Levenhuk, Inc. All rights reserved. 20221031