Prestel SP-H2-12T150 18Gbps HDMI 1×2 HDBaseT Splitter User Manual
- June 13, 2024
- Prestel
Table of Contents
- Prestel SP-H2-12T150 18Gbps HDMI 1×2 HDBaseT Splitter
- Product Information
- Product Usage Instructions
- Introduction
- Features
- Package Contents
- Specifications
- Operation Controls and Functions
- EDID Mode
- ASCII Commands
- Application Example
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Prestel SP-H2-12T150 18Gbps HDMI 1×2 HDBaseT Splitter
Product Information
Product Name: Prestel SP-H2-12T150
Features
- HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant
- Supports 18Gbps video bandwidth
- Supports video resolution up to 4K2K@60Hz 444
- Supports HDR, HDR10+, HLG and Dolby vision
- Supports up to 7.1CH HD audio pass-through
- Supports digital and analog audio de-embedded output
- Extends the signal transmission distance up to 394ft/120m at the resolution of 4K2K@60Hz, 492ft/150m at 1080P@60Hz via a single CAT6/6a/7 cable
- Supports 1 HDMI input, 1 HDMI loop output and 2 HDBaseT outputs
- IR, RS-232 routed to HDBaseT output
- Advanced EDID management
- Supports one-way POC function (only from transmitter to receiver)
- Compact design for easy and flexible installation
Package Contents
- 1 x Prestel SP-H2-12T150 unit
Product Usage Instructions
- Connect the Prestel SP-H2-12T150 unit using UTP connectors.
- Ensure direct interconnection method is used and do not cross connect.
- Connect the HDMI input source to the HDMI IN port on the transmitter unit.
- Connect the HDMI display or device to be controlled to the HDMI LOOP OUT port on the transmitter unit.
- Connect the receiving device or display to the HDBT IN port on the receiver unit.
- Connect the audio output devices as needed using the provided audio output connectors.
- Use surge protection systems to protect and extend the life of your equipment.
- Ensure proper power supply and follow the specified power consumption guidelines.
- Use the provided control ports (RS-232, IR) for controlling external devices.
- Follow the advanced EDID management instructions for optimal video and audio performance.
- Store and operate the product within the specified temperature and humidity ranges.
- Refer to the user manual for further information and troubleshooting guidelines.
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
- This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc.
- Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Caution
- The product requires the use of UTP connectors. Please connect in direct interconnection method and do not cross connect.
Introduction
This 18Gbps HDMI 1×2 HDBaseT Splitter can distribute 1 source signal to any 2 display devices, with video resolution up to 4K2K@60Hz 4:4:4. It is designed with 1 HDMI loop output and 2 HDBaseT outputs. The HDMI signal transmission distance can be extended up to 394ft/120m at the resolution of 4K2K@60Hz, or 492ft/150m at 1080P@60Hz via a single CAT6/6a/7 cable. The product supports up to 7.1CH HD audio pass-through. It also supports IR and RS-232 signal pass- through, audio de-embedding function and advanced EDID management.
Features
- HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant
- Support 18Gbps video bandwidth
- Support video resolution up to 4K2K@60Hz 4:4:4
- Support HDR, HDR10+, HLG and Dolby vision
- Support up to 7.1CH HD audio pass-through
- Support digital and analog audio de-embedded output
- Extend the signal transmission distance up to 394ft/120m at the resolution of 4K2K@60Hz, 492ft/150m at 1080P@60Hz via a single CAT6/6a/7 cable
- Support 1 HDMI input, 1 HDMI loop output and 2 HDBaseT outputs.
- IR, RS-232 routed to HDBaseT output
- Advanced EDID management
- Support one-way POC function (only from transmitter to receiver)
- Compact design for easy and flexible installation
Package Contents
- 1 × 18Gbps HDMI 1×2 HDBaseT Splitter
- 2 × HDBaseT Receiver
- 3 × IR Blaster Cable (1.5 meters)
- 3 × 20K~60KHz IR Receiver Cable (1.5 meters)
- 3 × 3pin-3.81mm Phoenix Connector (male)
- 1 × 5pin-3.81mm Phoenix Connector (male)
- 6 × Mounting Ear
- 1 × 24V/1A DC Locking Power Adapter
- 12 × Machine Screws (KM3*4)
- 1 × User Manual
Specifications
Technical
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2/1.x
Video Bandwidth| 594MHz/18Gbps
Video Resolution| Up to 4K2K@60Hz YUV 4:4:4
Color Depth
| 8-bit, 10-bit, 12-bit (1080p@60Hz) 8-bit (4K2K@60Hz YUV4:4:4)
8-bit, 10-bit, 12-bit (4K2K@60Hz YCbCr 4:2:2/4:2:0)
Color Space| RGB 4:4:4, YCbCr 4:4:4 / 4:2:2 / 4:2:0
HDR
| Support HDR, HDR10+, HLG, Dolby vision
( Note: For Dolby vision, the local HDMI loopout supports 4K60, but the remote HDMI output only supports 1080P. )
HDMI Audio Formats
| LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital
Plus(DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
Coaxial Audio Formats| PCM2.0, Dolby Digital / Plus, DTS 2.0/5.1
Analog Audio Formats| PCM 2.0CH
ESD Protection| Human body model—±8kV (Air-gap discharge) &
±4kV (Contact discharge)
Connection
Transmitter
| Input: 1 x HDMI IN [Type A, 19-pin female]
Output: 1 x HDMI LOOP OUT [Type A, 19-pin female] 2 x HDBT OUTPUT [RJ45]
1 x COAX AUDIO OUT [RCA]
1 x L/R AUDIO OUT [5-pin phoenix connector] Control: 1 x RS-232 [3-pin phoenix connector]
1 x EDID DIP switch [5-pin]
1 x IR IN [3.5mm stereo mini-jack]
1 x IR OUT [3.5mm stereo mini-jack]
Receiver
| Input: 1x HDBT IN [RJ45, 8-pin female] Output: 1x HDMI Type A [19-pin female]
1x AUDIO OUT [3.5mm Stereo Mini-jack] Control: 1x IR IN [3.5mm Stereo Mini- jack]
1x IR OUT [3.5mm Stereo Mini-jack] 1x RS-232 [Phoenix jack]
1x SERVICE [Mini-USB, Update port]
Mechanical
Housing| Metal Enclosure
Silkscreen Color| Black
Dimensions| Transmitter: 170mm (W) × 130mm (D) × 40mm (H) Receiver: 140mm (W)
× 65mm (D) × 18mm (H)
Weight| Transmitter: 689g Receiver: 155g
Power Supply| Input: AC100 – 240V 50/60Hz, Output: DC 24V/1A (US/EU standards,
CE/FCC/UL certified)
Power Consumption| 18W (Max)
Operation
Temperature
| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Operation Controls and Functions
Transmitter
Front Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | When the device is powered on, the red power LED will |
be on.
2| IN LED| When the HDMI IN port connects an active source device,
the green LED will be on.
3| LOOP LED| When the HDMI LOOP OUT port connects an active display device,
the green LED will be on.
4| OUT(1~2) LED| When the HDBT OUTPUT 1/2 port connects an HDBaseT Receiver,
the corresponding green OUT LED will be on.
Rear Panel
| No. | Name | Function Description |
|---|
1
| ****
RS-232
| Connect to a PC or control system via a 3-pin phoenix connector cable for three functions:
1, Firmware update;
2, Control the Splitter via RS-232 commands;
3, RS-232 signal pass-through (from transmitter to receiver or from receiver to transmitter).
2| IR IN| Connect the IR receiver cable, the IR receive signal will
emit to the IR OUT port of the HDBaseT Receiver.
3| IR OUT| Connect the IR blaster cable, the IR emit signal is from the IR IN
port of the HDBaseT Receiver.
4| AUDIO OUT (COAX, L/R)| Coaxial and analog audio output ports, connected to
audio amplifier or speaker.
5| POWER switch| Press this switch to power on/off the device.
6| EDID DIP
switch
| Used to set EDID mode. Please refer to Section “6. EDID Mode” for details.
7
| ****
HDMI port
| IN: HDMI input port, connected to HDMI source device such as DVD or set-top
box with an HDMI cable.
LOOP OUT: HDMI loop output port, connected to HDMI display device such as TV
or Monitor with an HDMI cable.
8| HDBT OUTPUT
port (1~2)
| Connect to the HDBT IN port of the HDBaseT receiver with a CAT cable.
9
| ****
Link Signal Indicator lamp (Green)
| ▪ Illuminating: Transmitter and Receiver are in good connection status.
▪ Flashing: Transmitter and Receiver are in poor
connection status.
▪ Dark: Transmitter and Receiver are not connected.
10
| Data Signal
Indicator lamp (Orange)
| ▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
---|---|---
11
| ****
DC 24V
| Plug the DC 24V power supply into the unit and connect the adaptor to an AC outlet. ( Note: The transmitter can power the receiver via a CAT cable.)
HDBaseT Receiver
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | When the receiver is powered on, the red power LED will be on. |
| 2 | SERVICE port | Used for firmware update. |
3
| ****
DC 24V
| Plug DC 24V/1A power supply into the unit and connect the adapter to an AC outlet.
( Note: The HDBaseT receiver also can be powered by the
transmitter via a CAT cable.)
4| HDBT IN| Connect to the HDBT OUTPUT port of the transmitter with a CAT cable.
5
| ****
Link Signal Indicator lamp (Green)
| ▪ Illuminating: Transmitter and Receiver are in good connection status.
▪ Flashing: Transmitter and Receiver are in poor
connection status.
▪ Dark: Transmitter and Receiver are not connected.
6
| Data Signal
Indicator lamp (Orange)
| ▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7| HDMI OUT| HDMI output port, connected to HDMI display device such as TV or
Projector with an HDMI cable.
---|---|---
8| AUDIO OUT| Audio output port, connect to audio amplifier or speaker.
9| IR IN| Connect the IR Receiver cable. The IR signal will send to the IR OUT
port of the transmitter.
10| IR OUT| Connect the IR blaster cable, the IR signal is from the IR
IN port of the transmitter.
11
| ****
RS-232
| 3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will pass-through
from transmitter to receiver or from receiver to transmitter.
IR Pin Definition
Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.
EDID Mode
The defined EDID setting list of the product is shown as below:
| EDID Mode | EDID Description |
|---|---|
| 11111 | 1080P, Stereo Audio 2.0 |
| 11110 | 1080P, Dolby/DTS 5.1 |
| 11101 | 1080P, HD Audio 7.1 |
| 11100 | 1080I, Stereo Audio 2.0 |
| 11011 | 1080I, Dolby/DTS 5.1 |
| 11010 | 1080I, HD Audio 7.1 |
| 11001 | 1080P 3D, Stereo Audio 2.0 |
| 11000 | 1080P 3D, Dolby/DTS 5.1 |
| 10111 | 1080P 3D, HD Audio 7.1 |
| 10110 | 4K2K30Hz_444, Stereo Audio 2.0 |
| 10101 | 4K2K30Hz_444, Dolby/DTS 5.1 |
| 10100 | 4K2K30Hz_444, HD Audio 7.1 |
| 10011 | 4K2K60Hz_420, Stereo Audio 2.0 |
| 10010 | 4K2K60Hz_420, Dolby/DTS 5.1 |
| 10001 | 4K2K60Hz_420, HD Audio 7.1 |
| 10000 | 4K2K60Hz_444, Stereo Audio 2.0 |
| 01111 | 4K2K60Hz_444, Dolby/DTS 5.1 |
| 01110 | 4K2K60Hz_444, HD Audio 7.1 |
| 01101 | 4K2K60Hz_444, Stereo Audio 2.0 HDR |
| 01100 | 4K2K60Hz_444, Dolby/DTS 5.1 HDR |
| 01011 | 4K2K60Hz_444, HD Audio 7.1HDR |
| 01010 | COPY_FROM_LOOP OUT |
| 01001 | COPY_FROM_HDBT OUT1 |
| 01000 | COPY_FROM_HDBT OUT2 |
| 00111 | 1080P, Stereo Audio 2.0 |
| 00110 | 1080P, Stereo Audio 2.0 |
| 00101 | 1080P, Stereo Audio 2.0 |
| 00100 | 1080P, Stereo Audio 2.0 |
| 00011 | 1080P, Stereo Audio 2.0 |
| 00010 | 1080P, Stereo Audio 2.0 |
| 00001 | 1080P, Stereo Audio 2.0 |
| 00000 | PC control mode |
ASCII Commands
The product also supports ASCII command control. Connect the RS-232 port of the product to a PC with a 3-pin phoenix connector cable. Then, open a Serial Command tool on PC to send ASCII commands to control the product. The ASCII command list about the product is shown as below.
ASCII Commands
Serial port protocol. Baud rate: 115200 (default), Data bits: 8bit, Stop
bits:1, Check bit: 0
x – Parameter 1 y – Parameter 2
! – Delimiter
Command Code| Function Description| Example| Feedback|
Default Setting
Power
s power z!
|
Power on/off the device,z=0~1 (z=0 power off, z=1 power on)
|
s power 1!
| Power on
System Initializing… Initialization Finished! FW version x.xx.xx
|
power on
r power!| Get current power state| r power!| power on/power off|
s reboot!
|
Reboot the device
|
s reboot!
| Reboot…
System Initializing… Initialization Finished! FW version x.xx.xx
|
System Setup| | | |
help!| List all commands| help!| |
| | | |
r status!
|
Get device current status
|
r status!
| Get the unit all status: power,
in/out connection,
edid mode
|
r fw version!| Get Firmware version| r fw version!| MCU BOOT: Vx.xx.xx MCU
APP: Vx.xx.xx|
r link in!| Get the connection status of the input port| r link in!| HDMI IN:
connect|
r link out y!
| Get the connection status of the y output port, y=0~3 (0=all, 1~2=HDBT 1~2, 3 = loop out)|
r link out 1!
| hdmi loop out: connect
hdbt output 1: connect
|
s reset!
|
Reset to factory defaults
|
s reset!
| Reset to factory defaults
System Initializing… Initialization Finished! FW version x.xx.xx
|
Output Setting
s hdmi stream z!
| Set hdmi loop output stream on/off
z=0~1 (0:disable,1:enable)
|
s hdmi stream 1 !
| Enable hdmi loop out stream
Disable hdmi loop out
stream
|
enable
s hdmi hdcp z!
| Set hdmi loop output hdcp on/ off
z=0~1 (0:disable,1:enable)
|
s hdmi hdcp 1!
| Enable hdmi loop out hdcp
Disable hdmi loop out
hdcp
|
enable
s hdbt y hdcp z!
|
Set hdbt output y hdcp on/off, y=0~2 (0=all)
z=0~1 (0:disable, 1:enable)
|
s hdbt 1 hdcp 1 !
s hdbt 0 hdcp 1 !
| Enable hdbt output 1
hdcp
Disable hdbt output 1 hdcp
Enable hdbt all outputs hdcp Disable hdbt all
outputs hdcp
|
enable
| | | Enable hdbt output 1|
s hdbt y stream z!
|
Set hdbt output y stream on/ off, y=0~2 (0=all)
z=0~1 (0:disable,1:enable)
| s hdbt 1 stream 1 !
s hdbt 0 stream 1 !
| stream
Disable hdbt output 1 stream
Enable hdbt all outputs stream
Disable hdbt all
|
enable
| | | outputs stream|
r hdmi stream!| Get hdmi loop out stream status| r hdmi stream!| Enable hdmi
output stream|
r hdmi hdcp!| Get hdmi loop out hdcp status| r hdmi hdcp!| Enable hdmi output
hdcp
|
r hdbt y hdcp!| Get hdbt output y hdcp status, y=0~2 (0=all)| r hdbt 1 hdcp!|
Enable hdbt output 1 hdcp|
r hdbt stream!| Get hdbt output y stream status, y=0~2 (0=all)| r hdbt 1
stream!| Enable hdbt output 1 stream|
EDID Setting
s edid in from z!
| Set input EDID from default EDID z, z=1~24
1, 1080p,Stereo Audio 2.0
2, 1080p,Dolby/DTS 5.1
3, 1080p,HD Audio 7.1
4, 1080i,Stereo Audio 2.0
5, 1080i,Dolby/DTS 5.1
6, 1080i,HD Audio 7.1
7, 3D,Stereo Audio 2.0
8, 3D,Dolby/DTS 5.1
9, 3D,HD Audio 7.1
10, 4K2K30_444,
Stereo Audio 2.0
11, 4K2K30_444,Dolby/DTS 5.1
12, 4K2K30_444,HD Audio 7.1
13, 4K2K60_420,
Stereo Audio 2.0
14, 4K2K60_420,
Dolby/DTS 5.1
15, 4K2K60_420,HD Audio 7.1
16, 4K2K60_444,
Stereo Audio 2.0
17, 4K2K60_444,
Dolby/DTS 5.1
18, 4K2K60_444,HD Audio 7.1
19, 4K2K60_444,
Stereo Audio 2.0 HDR 20, 4K2K60_444,
Dolby/DTS 5.1 HDR
21, 4K2K60_444,
HD Audio 7.1 HDR
22, copy from hdmi loop out 23, copy from hdbt output 1
24, copy from hdbt output 2
|
s edid in from 1!
|
input EDID:1080p, Stereo Audio 2.0
Please toggle EDID dip switch to 00000!
|
1080p,Stereo Audio 2.0
s edid user1 00
FF FF FF FF …!
| Set user1 EDID data| s edid user1 00
ff ff ff ff …. !
| user1 EDID data: 00
FF FF ….
|
r edid user1!
|
Get user1 EDID data
|
r edid user1!
| user1 EDID data : 00 FF FF FF FF FF FF
00 ………
|
r edid in!| Get EDID status of the input| r edid in!| input EDID: 4K2K60_
444,Stereo Audio 2.0|
r edid in data!| Get the EDID data of the hdmi
input
| r edid in data!| EDID data : 00 FF FF
FF FF FF FF 00 ……
|
RS-232 BYPASS Setting
s rs232 bypass hdbt y!
| Set RS-232 port connect to HDBT out1 Receiver RS-232 port, y=0~3 ( 0=all,
1~2= hdbt out 1~2, 3=NC)
|
s rs232 bypass hdbt 1!
| RS-232 connect to HDBT OUT1
RS-232 not connect
to HDBT OUT
|
y=0
r rs232 bypass!
|
Get RS-232 port connect to HDBT out receiver RS-232 port
|
r rs232 bypass!
| RS-232 connect to HDBT OUT1
RS-232 connect to all HDBT OUT
RS-232 not connect
to HDBT OUT
|
s device baud w size x stop y parity z!
| Set receiver control device COM port setting, w=2400, 4800,9600,19200,38400,
57600,115200, x=7,8
y=1,2, z=none, even,odd
| s device baud 57600 size 8
stop 1 parity none!
| receiver device COM port setting baudrate: 57600 data size :8, stop:1 parity: none|
s rs232 time x!
| set send RS232 command wait time
x=200~5000ms
| s rs232 time 200!| send RS-232 command wait time 200ms|
200ms
Application Example
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>