BASS JAXX SP-0203 Radiant Wireless LED Speaker Instruction Manual
- June 6, 2024
- BASS JAXX
Table of Contents
Instruction Manual
Thank you for purchasing the giant Wireless LED Speaker, This manual provides more information about this wireless speaker, please reed the instructions before using it.
Product Overview
Package Contents
Radiant Wireless LED Speaker x 1pc
Micro USB Charging Cable x 1pc
Instruction Manual x tpc
Pow On/Off
Power on
Slide the ON/OFF switch to the ‘OW position.
Power off
Slide the ON/OFF switch to the ‘OFF’ position.
Note Neways slide the Power switch to –Orr position when not in use
Pair Wireless speaker with your mobile device
- Keep the distance between your wireless speaks, and mobile phone (or other devices) within 32 8 Feet
- Power on the wireless speaker.
- Activate the Bluetooth function on your phone within range and select BT RADIANT SPK’ from the list shown.
- You will hear a beep sound when pairing is successful.
Reconnect Wireless speaker to your mobile device
When powered on, the zero-loss speaker will automatically connect with the last successfully paced device
Charging your Wireless speaker
For your safety, please always use the appropriate 5V input charger adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product
- Use the Micro USB cable provided with this wireless speaker.
- Connect the Micro USB plug to the Micro USB charging port CO the speaker, then conned the USB plug to a USB port on a computer or wall adapter to begin charging
- The light will turn red while charging and will turn off on fully charged.
NOTE:
- You must select a Qua/died charger Iran a regular manufacturer.
- You must charge the Wireless speaker If It has been not used for rro–e ran 12 months.
Technical specification
Drive, Demeter. 4S mrr Impedance– 4 Ohms
Power Supply Li-ion Battery 3.7V 300 reAh
Playtime. 1.52 Hours
Charging Time: 1.5-2 Hours
Bluetooth Range: 32.8 Feet
Micro USB Cable !included
FAQ
-
If the Wireless speaker cannot be paired with your device, please try the following:
Ensure that your speaker is in pairing mode or reconnection mode
Ensure teal Bluetooth search function of your mobile device is activated, -
If the Wireless speaker cannot be recharged:
If you use a power outlet. ensure that the power supply is connected securely and the outlet works If you use a computer, ensure that it is connected and the USB port Is powered.
Safety instructions for the lithium battery and charging the product
-The input voltage lo the product is DC 5V 1A.
– In order to charge the valid n safe manner and reliable conditions. please
only adopt a certified appropriate charger/ adapter for charging through tho
product
-Only charge the product at ambient temperatures between 10 deg °C1 50 deg ‘F and 40 deg ‘0104 deg ‘F.
– Do not heat above 70 deg ‘C/158 deg °F, eg. Do not expose to sunlight cc
throw into fire.
-Switch off the product after use.
-Please note that we won’t bike any responsibility for any voting
operation (eg. Voltage higher than 5V) as this may resit In severe nay or
loss of property, and we cannot control the operating process dung the
time the user using the product. it extreme cases, abuse cr misuse of the
Lithium battery packs can lead to an explosion. heat generation. Fre
development or snake development.
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation -
Changes cr modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to coney with the limits
for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. Those
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This oqu pment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
MOW n a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
image the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
− Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a drain different from that to which
the receiver is connected.
-Cana the dealer or an experienced radio live technician for help.
RF warning statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restnction
Class, I LED product
FCC ID: 2ADMS-SP-0203
ITEMS SP-0203
Made in China
Distributed by 1616 Holdings. Inc.
701 Market Street, Suite 200. Philadelphia, PA 19106
Keep all relevant information for future reference