PARKSIDE IAN445996_2307 Sanding Pad and Brush Attachment Set Instruction Manual
- July 31, 2024
- PARKSIDE
Table of Contents
SANDING PAD & BRUSH ATTACHMENT SET
Translation of the original instructions
IAN445996_2307 Sanding Pad and Brush Attachment Set
IAN 445996_2307
SANDING PAD & BRUSH ATTACHMENT SET
Introduction
We congratulate you on the purchase of your new product. You have chosen a
high quality product.
Familiarise yourself with the product before using it for the first time. In
addition, please carefully refer to the operating instructions and the safety
advice below. Only use the product as instructed and only for the indicated
field of application. Keep these instructions in a safe place. If you pass the
product on to anyone else, please ensure that you also pass on all the
documentation with it.
Intended use
This product is not intended for commercial use.
Assembly
See instruction manual of machine for further information
Technical Data
Bristle length: 25 mm (for 100 mm diameter), 30 mm (for 48 + 85 mm diameter)
Brush holder: hexagon 6.3 mm (1/4 “) Max. speed
brushes: 1200 1/min
Velcro plate: max. speed: 11,000 min-1
Velcro plate thread: M14 Adapter Velcro
plate: M14 thread, hexagonal shaft 6.3 mm, total length 45 mm
BEFORE FIRST USE, FAMILIARIZE YOURSELF WITH THE PRODUCT’S INSTRUCTIONS FOR USE
AND SAFETY INSTRUCTIONS! IF YOU GIVE THE PRODUCT TO A THIRD PARTY, YOU MUST
INCLUDE ALL DOCUMENTS. SAVE ALL SAFETY
INSTRUCTIONS AND INSTRUCTIONS FOR USE FOR FUTURE REFERENCE!
Contents of package/ parts description
1 x Small flat brush (48 mm)
1 x Large flat brush (100 mm)
1 x Round brush (85 mm)
5 x Sanding disc (grit K240, green)
5 x Sanding disc (grit K600, brown)
1 x Velcro plate
Accessories:
1x M14 screw adapter for Velcro plate
Safety instructions
To reduce the risk of injury. Please read the operating and safety
instructions carefully before using the device for the first time. These
operating and safety instructions must also be passed on to other users.
SAVE ALL SAFETY WARNINGS AND INSTRUCTIONS FOR FUTURE!
The use of damaged, incorrectly clamped or inserted brush attachments and
sanding discs is dangerous and can lead to serious injuries.
Storing and cleaning
- Brush attachments and sanding discs must be stored in such a way that they are not exposed to mechanical damage or harmful environmental influences (e.g. moisture, sunlight).
Before using
- Brush attachments and grinding plates must be visually inspected before each use.
- Damaged brush attachments and sanding discs may no longer be used.
- Brush attachments and sanding discs must not be mounted on machines whose speed is above the maximum permissible speed of the brush or grinding tool.
Instructions for mounting
- The clamping of brush attachments and sanding discs must be carried out in accordance with the instructions of the sanding tool and machine manufacturer.
- After each clamping, a test run must be carried out for an appropriate period of time, whereby the marked maximum working speed (speed) of the brush attachments or sanding discs must not be exceeded.
Safety instructions/ Operation for all types of use
- Observe the user information from the machine manufacturer.
- Attach all protective devices to the machine before commissioning.
- Do not carry out any work without protection by protective devices.
- Do not allow children to use the product unless they are being supervised. Children are not always able to correctly recognize potential dangers This product is not a toy.
- The maximum speed of the attachment must be at least as high as that of the power tool. Running attachments at speeds that exceed their maximum rated speed may cause them to break, release from the power tool and cause injury. Do not exceed Maximum Safe Free Speed (Max. R.P.M.) under any circumstances.
- Do not use any damaged attachments. Before use, always check your attachments for damages.
- If you drop a power tool or attachment, check it for damages or use undamaged attachments. You and all people in your vicinity should keep on a different level as the rotating attachment as soon as you have mounted it.
- Use protective equipment. For your own safety, always wear ear muffs, a breathing mask/dust mask, safety goggles, protective helmet and safety gloves.
- Observe all speed restrictions indicated on the brushes, packaging or catalogue.
- Keep all machine guards in place.
- Do not use deteriorated brushes.
Meaning of symbols
| Read all safety instructions
---|---
| Use protective eyewear
| Use ear protection
| Wear safety gloves
| Use a dust mask
| Unplug
Cleaning and storage
ATTENTION! PROPERTY DAMAGE!
- Do not use aggressive or abrasive cleaning agents, as they can damage the surfaces of the product.
- Clean the surfaces of the product with a soft, dry cloth.
- For stubborn dirt, use a slightly damp cloth with a little mild detergent.
- Store the product in a clean, dry location out of direct sunlight.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to
dispose of your worn-out product.
The product incl. accessories and packaging materials are recyclable and are
subject to extended producer responsibility.
Dispose them separately, following the illustrated Info-tri (sorting
information), for better waste treatment.
The Triman logo is valid in France only.
Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
E-Mail: owim@lidl.ie
http://www.lidl-service.com
IAN 445996_2307
OWIM GmbH & Co. KG
Stiftsbergstrabe
74167 Neckarsulm
GERMANY
Model No.: HG11264
Version: 02/2024
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>