VIMAR 09292.C.25 C-USB Supply Unit Instruction Manual
- July 22, 2024
- VIMAR
Table of Contents
VIMAR 09292.C.25 C-USB Supply Unit
Read the instructions before installation and/or use.
Power Delivery technology
FRONT AND REAR
FEATURES
| Power supply | 120-240 V~ 50/60 Hz |
|---|---|
| Power consumption | 400 mA – 120 V~ |
245 mA – 240 V~
Output power| 25 W
Power with no load| 0,02 W
Protection degree| IP20
Over/Under Voltage Protection, Over Current Protection, Short Circuit
Protection, Over Temperature Protection (reversible auto-off)
Operating temperature| 0 °C – +35 °C
indoor use
Device in class II| ****
Installation for CAT III overvoltage category
DC output current/voltage (± 5%) ES1 and efficiency
Voltage| Current| Average efficiency in active mode| Efficiency with low load
(10%)
---|---|---|---
V 5| A 3| 87,4| 81,1
V 9| 2,77 A| 90,0| 89,1
V 12| 2,08 A| 91,2| 89,6
INSTALLATION RULES
The device can be installed in a flush mounting box or surface mounting box
and completed with Neve Up cover plates in dust-free places, protected from
accidental impacts and away from heat sources.
IMPORTANT
- An easily accessible omnipolar disconnection switch with a contact gap of at least 3 mm must be installed upstream from the power supply.
- Install the device at a height of no more than 2 m
- The length of the connection cable to the electronic device must be no more than 3 m
- The power supply unit is protected internally against overloads.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead
DEVICE DETAILS, CONFIGURATION AND WEEE INFORMATION CAN BE DOWNLOADED IN PDF FORMAT FROM THE PRODUCT DATA SHEET ON www.vimar.com
References
- Home automation, electrical equipment, smart home - Vimar energia positiva
- Home automation, electrical equipment, smart home - Vimar energia positiva
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>