optimal OPTI12+ Wi-Fi Tankless Electric Water Heater User Manual
- May 15, 2024
- optimal
Table of Contents
optimal OPTI12+ Wi-Fi Tankless Electric Water Heater
Product Information
Specifications
- Product Name: Optimal Water Heater
- Mounting Type: Wall Mount
- Power Source: Electrical
- Installation Manual: Available in print and digital format
Product Usage Instructions
Mounting Instructions
- Position mounting template on the wall at the desired location. Ensure the unit is level and mark the drill holes.
- If mounting on drywall, use a 1/2-inch bit to drill pilot holes where the markings were made.
- Use (4) drywall anchors and (4) mounting screws. Insert the anchors into the drilled holes, then thread screws into the anchors. Do not thread screws all the way down. Leave them out.
- Remove the front cover of the heater. Align screws with the mounting holes on the back of the heater and gently place it onto the wall. Ensure the unit is secure before letting go.
Congratulations! You have successfully mounted your Optimal water heater. For instructions on plumbing and electrical installation, please refer to the installation manual provided with your unit, or visit itsoptimal.com for a digital version.
FAQ
- Q : Can the Optimal Water Heater be mounted on any type of wall?
- A: The Optimal Water Heater is designed to be mounted on drywall using the provided anchors and screws. For other wall types, please consult a professional for suitable mounting hardware.
- Q: Is professional installation required for mounting the water heater?
- A: While you can follow the provided mounting instructions if you are unsure or uncomfortable with the process, it is recommended to seek professional installation services to ensure proper mounting and safety.
Installation instructions
- Position mounting template on the wall at the desired location. Make sure the unit is level and mark the drill holes
- Remove the mounting template. If mounting on drywall, use a 1/2” bit to drill pilot holes where the markings were made.
- Use (4) drywall anchors and (4) mounting screws. Insert the anchors into the drilled holes, then thread screws into the anchors. Do not thread screws all the way down. Leave them out about ¼
- Remove the front cover of the heater. Align screws with the mounting holes on the back of the heater and gently place it onto the wall. Make sure the unit is secure before letting go.
Congratulations! You have successfully mounted your Optimal water heater. For instructions on plumbing and electrical installation, please refer to the installation manual provided with your unit, or visit itsoptimal.com for a digital version.
References
Read User Manual Online (PDF format)
Loading......