Imou AX3000 300 Mbps Wi-Fi 4G LTE Router User Guide
- July 21, 2024
- imou
Table of Contents
Imou AX3000 300 Mbps Wi-Fi 4G LTE Router
Package Contents
Connect the Device
- Insert your 3G/4G SIM card into the built-in slot.
- Make sure that the router is close to a power outlet and near Ethernet cables for wired computers.
- Place the router horizontally and orient the antennas vertically.
Images may differ from the actual product.
LED and Buttons
Reset Button
Press and hold the RST button for more than 10s to reset the router to its
factory mode.
Set Up the Network
-
Connect your device to the router wirelessly or with an Ethernet cable.
-
Wired connection
Connect the computer to the router’s LAN port using an Ethernet cable. -
Wireless connection
Find the SSID printed on the label of the router. Go to the Wi-Fi settings of your device, and then select the SSID to join in the network.
-
-
Launch a web browser on the device connected to the Wi-Fi network, and visit http://imouwifi.net. Set a password to log in. Follow the on-screen instructions to set up the internet connection.
- For the user guide, support, and more information, please visit https://www.imoulife.com/support
- Email service.global@imoulife.com to give suggestions.
- Follow @imouglobal to get more brand information.
FAQ
Q1: What should I do if I forget my web management password?
- Use a pin to press and hold the RESET button on the real panel on the router for over 10 seconds to restore the router to the factory settings.
- When the router is powered on, reconnect your device to the router (wired or wireless). Then, launch a web browser and visit http://imouwifi.net to reset a password.
Q2: What should I do if I can’t access the router’s management page?
- Reboot your router and try again.
- Check your Wi-Fi connection.
- Use another Web browser such as Google Chrome.
- Restart your device.
Q3: What can I do if my Wi-Fi devices cannot connect over Wi-Fi to the router?
- Please try to check:
- You have enabled the router’s SSID network broadcast and displays in your Wi-Fi client’s scanning list.
- You have entered the correct Wi-Fi password when connecting your devices to the Wi-Fi network. If you fail to address the problem, you can reset the router to factory default settings.
Q4: What can I do when there is no internet connection using 4G SIM card?
- Test the SIM card on another 4G device or smartphone to make sure the SIM card itself is working properly.
- Confirm that there is enough balance on the SIM card.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>