RIDGID RFC90 Flux Core Welder Instruction Manual
- July 11, 2024
- RIDGID
Table of Contents
RIDGID RFC90 Flux Core Welder
Specifications
- Processes: Flux-Core (FCAW)
- Input Amperage Power Rating: 120V, 90A
- Rated Output: 30-90A
- Welding Wire: Up to .30 thickness, Up to 1/4 diameter
- Duty Cycle: 20% @ 90A
- Weight: 9 Lbs.
Product Usage Instructions
Setup and Connection
- Ensure the welder is on a stable surface and well-ventilated area.
- Connect the welder to a 120-volt power source.
- Adjust the voltage and wire speed controls to the desired settings based on your welding requirements.
Welding Process
- Put on appropriate welding safety gear including gloves, helmet, and protective clothing.
- Insert the welding wire spool into the welder, ensuring it is securely in place.
- Position the welding gun nozzle at the starting point of the weld joint.
- Activate the welder and initiate the welding arc by pressing the trigger on the welding gun.
- Move the welding gun steadily along the joint, maintaining a consistent speed for optimal weld quality.
Cool Down and Maintenance
- Allow the welder to cool down after use before storing it.
- Regularly clean the welding gun consumables and check for any signs of wear or damage.
- Follow the maintenance guidelines provided in the Instruction Manual to ensure long-lasting performance.
FAQ
Q: Can this welder be used for outdoor welding?
A: Yes, the RFC90 Flux-Core Welder is convenient for outdoor welding due to its portability and lightweight design.
Q: How can I get customer assistance for this product?
A: You can reach RIDGID’s customer support by calling 1-800-4-RIDGID for any questions or concerns regarding the product. They provide troubleshooting assistance over the phone and offer professional fixing services if required.
Specifications
PROCESSES| INPUT POWER| AMPERAGE RATING| RATED OUTPUT|
WIRE DIAMETER| WELDING THICKNESS RANGE| DUTY CYCLE|
WEIGHT
---|---|---|---|---|---|---|---
Flux-Core (FCAW)| 120V| 90A| 30-90A| Up to .30”| Up to 1/4”| 20% @ 90A| 9 Lbs.
APPLICATIONS
- Do-It-Yourself
- Metal Fabrication
- Maintenance & Repair
- Hobbyist
WHAT’S INCLUDED
- 6’ MIG Gun (Attached)
- 5’ Ground Cable & Clamp
- Shoulder Strap
- Extra .030” Contact Tip
- Instruction Manual
- Quick Start Guide
BENEFITS
- Inverter Technology -More Efficient, More Control
- Infinite Control for Voltage &
- Wire Speed
- Lightweight & Portable
- No Gas Required
RFC90 FLUX-CORE WELDER:
- The RIDGID RFC90 is a portable and lightweight welder that can be connected to 120-volt power. Its intuitive user interface, simple setup, and comprehensive Quick Start Guide and Instruction Manual allow for quick and easy welding.
- The RFC90 features inverter technology ensuring superior efficiency in welding applications. Precise voltage and wire speed controls let users set the machine exactly how they need it.
FEATURES AND BENEFITS
- The RFC90 is tailored for novice welders, featuring user-friendly controls that simplify the learning process. With no need for additional gas bottles, it offers added convenience while being lightweight and portable, making it suitable for on-the-go projects.
- Its shoulder strap and mere 9 lbs. body ensure easy transportation to any job site. The machine’s infinite control of voltage and wire feed speed enables precise customization of settings, catering to individual preferences and welding requirements with ease.
FLUX-CORE
- The expansive 30-90 Amp welding output allows you to weld from 22 Ga. to 1/4” thick mild steel
- A smooth arc starts and a forgiving arc makes dialing in your application easy
- No need for additional gas bottles makes it extremely portable and convenient for outdoor welding
FLUX-CORE GUN CONSUMABLES
| 1 | RMGD24-50 | Gas Diffuser (Tweco® Style 24-50) |
|---|---|---|
| 2 | RMCT1123 | .024” Contact Tip (Tweco® Style 11-23) |
| 2 | RMCT1130 | .030” Contact Tip (Tweco® Style 11-23) |
| 3 | RMN90 | Nozzle |
RECOMMENDED ACCESSORIES
- Up to .030” Flux-Core Wire: 2 Lbs. (RFW30-2)
- ADF Welding Helmet (RADF-BLK)
- Welding Gloves (RWG-HD-L)
- Welder Accessories Start-Up Kit (RWSUK)
- Welding Pliers (RWP-7N1)
- Chipping Hammer (RCH-SH)
CUSTOMER ASSISTANCE POLICY
- RIDGID’s customer assistance policy is designed to streamline the troubleshooting process and ensure a hassle-free experience for its customers.
- With a commitment to customer satisfaction, RIDGID offers support over the phone to address any questions or concerns promptly.
- If an issue is substantial and cannot be resolved remotely, customers can send in their machines for professional fixing by the team at no additional cost.
- This approach reflects RIDGID’s dedication to delivering reliable and comprehensive support, reinforcing their commitment to quality service.
- If you have any questions or concerns about a RIDGID product, call 1-800-4-RIDGID.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>